Avalon ASIC users thread

[mtbitcoin]

Hi

Any help would be appreciated. I recently updated from the 20130703 firmware which has been running extremely stable to the xxxx0923.

However, from openWRT web interface I am now getting the following error :

-----------------------
[Firmware Version] => 20130923
cgminer: 48681dd
cgminer-openwrt-packages: 3527ce4
luci: 296b358
Socket connect failed: Connection refused
----------------------------------------------


I was only able to manually start CGMINER from SSH and starting it from the command line.

Any ideas. I have already HARD rebooted the machine once

[1714162094]

1714162094

[1714162094]

1714162094

[1714162094]

1714162094

[edgar]

reflash with the 0923 again

or

reflash with any previous f/w update

[Satobit]

Hi

Any help would be appreciated. I recently updated from the 20130703 firmware which has been running extremely stable to the xxxx0923.

However, from openWRT web interface I am now getting the following error :

-----------------------
[Firmware Version] => 20130923
cgminer: 48681dd
cgminer-openwrt-packages: 3527ce4
luci: 296b358
Socket connect failed: Connection refused
----------------------------------------------


I was only able to manually start CGMINER from SSH and starting it from the command line.

Any ideas. I have already HARD rebooted the machine once

I think you need to set the --avalon-temp 70 and --avalon-cutoff 90

[mtbitcoin]

Thanks for the advice guys.

Ended up reflashing to my previous firmware.. oh well. worth a try anyway

[smoothrunnings]

Hi

Any help would be appreciated. I recently updated from the 20130703 firmware which has been running extremely stable to the xxxx0923.

However, from openWRT web interface I am now getting the following error :

-----------------------
[Firmware Version] => 20130923
cgminer: 48681dd
cgminer-openwrt-packages: 3527ce4
luci: 296b358
Socket connect failed: Connection refused
----------------------------------------------


I was only able to manually start CGMINER from SSH and starting it from the command line.

Any ideas. I have already HARD rebooted the machine once

When you flashed your system did you blow away the settings? I found that keeping the settings sometimes hinders the update to work properly.

I also had the same problem you had with my B2 when I first got it, it was because I was using the wrong URLs in my config to mine. I was using https:// ones for bitminter and not the stratum+tcp:// one. Once I switched to the correct URL everything worked.

[smoothrunnings]

Is there any easy way of getting a forth module for a Avalon?

I have a B1 and B2 that I would love to get a 4th blade/module for.

Thanks,

They are available in stock from Avalon.

but impossible to buy a module alone ! i test yesterday and today. cant add to card and no answer from avalon

result i buy 2 units instead

That's okay I needs a batch 1 and batch 2 module anyways.

Thanks

[smoothrunnings]

Is it possible to use a version 1.5 avalon controll unit(FPGA) to run a 4 module version 3 Avalon?

I am running a batch 3 module & 3 @ batch 2 modules with a version 1.52 controller (Batch 2, delivered in July).

what do you need to do it? Ive tried to no avail.

I plugged in the ribbon cable & a power cable into their respective slot 4 positions.
I changed the number of miners from 24 to 32.
The holes that attach the heat sink to the bottom place are not compatible.  I affixed 1 screw to the heat sink, and tried not to move the miner very much.  The module had to be installed at an angle for the header to fit.

I ran it this way for many weeks with the Golden 850 or whatever brand power supply, but I felt nervous about drawing 1030 W from the wall, and bought an OCZ ZX Series 1250W and installed it a few weeks ago.  This seemed to be a good power supply and is on the known good list on the avalon wiki.  I did (have to) remove 1 of the top plate mounting screws, as the power supply is a little taller than the original.

Today, I received the expansion module for a Batch #2 unit, and I did a swap out between the batch #3 and the batch #2 4th modules.  My Batch #2 unit is now an Avalon stock unit, with the replacement OCZ power supply and an Avalon (4th) expansion module.

I also have a 2nd machine.  It is a fire damaged Batch #3 unit.  I bought a controller, cables, PDU, and thermometers from bitmine.ch.  This is all Batch #2 compatible equipment.  The PDU is mounted on the original mounting holes.  The controller is freestanding.  The Golden 850 power supply from my Batch #2 is mounted inside the case.  I have a fire damaged module with 6 good sub-assemblies, and I am hosting another Batch #3 module for a 3rd party.  So, this Frankenstein unit is a mish-mash of Batch #2 & Batch #3, Avalon & 3rd party equipment.  It is currently mining at 256 MHz without the thermometers installed, and using an external fan.

What an adventure. 

Sorry when you said you changed the number of miners from 24 to 32, why is that?
I have look around on google and the wiki for some kind of manual for the Avalon and come up empty.

Thanks

[ste0024]

24 for 3 modules
32 for 4 modules

[crazyearner]

can someone advise me on batch 3 units with 4 moduals on power at normal speeds and oced speeds thx

[ste0024]

from avalon



4 module unit clocked at 285Mhz, 750W power supply.

note: to overclock pass 310Mhz you will need to replace the power supply.

350Mhz  = 1200w or maybe 1000w

here

http://avalon-asics.com/product/avalon-4-module-unit-gen1/

[smoothrunnings]

from avalon



4 module unit clocked at 285Mhz, 750W power supply.

note: to overclock pass 310Mhz you will need to replace the power supply.

350Mhz  = 1200w or maybe 1000w

here

http://avalon-asics.com/product/avalon-4-module-unit-gen1/

285Mhz does how many GH/s?

[smoothrunnings]

can someone advise me on batch 3 units with 4 moduals on power at normal speeds and oced speeds thx

Look back a couple of threads there is mention of OC'n 4 module Avalon's. Of course in the end it depends on how big your PSU is.

[ProfMac]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

[bobsag3]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

I would get some... but trade hilllll

[ProfMac]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

I would get some... but trade hilllll

oh?

[smoothrunnings]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

When I go to the line all I get is a blank screen.

[ProfMac]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

When I go to the line all I get is a blank screen.

I'm registered & logged in.  Perhaps that matters.

[smoothrunnings]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

When I go to the line all I get is a blank screen.

I'm registered & logged in.  Perhaps that matters.

What's the main URL then silly?

[ProfMac]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

When I go to the line all I get is a blank screen.

I'm registered & logged in.  Perhaps that matters.

What's the main URL then silly?

http://www.tradehill.com

[bobsag3]

There are about 240 new Avalons, 2 module, 60 GH/s, at auction for 2 BTC.

When I go to the line all I get is a blank screen.

Same here