alikas74
Newbie
 Offline
Activity: 18
Merit: 0
|
 |
November 01, 2018, 05:20:59 AM |
|
hi @doktor83
can you help with better settings for v8
rx 550 2gb sapphire elpida
rx 560 2gb sapphire elpida
intensity, worksize, fragments?
thank you.
|
|
|
|
|
|
|
|
"Governments are good at cutting off the heads of a centrally
controlled
networks like Napster, but pure P2P networks like Gnutella and Tor seem
to be holding their own." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
VulcanR
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 01, 2018, 11:40:33 AM |
|
Hi all,
After switching to adrenaline 18.5/18.6 my hash shows 370-390 GPUs asus rog rx570. On blockchain driver I got 800h, but miner crashes after 2-3 hours.
Intensity-35, worksize-16, threads-2
Using Srb 1.6.8. win 10 x64
GPU settings voltage- 100, core-1140,memory-1980.
|
|
|
|
|
Velmerk
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 01, 2018, 01:09:18 PM |
|
Rig with 588+7*Vega56 works well on 1.6.8, HR~14000
after update to 1.6.9 hashrate ~13900, and its not stable.
|
|
|
|
|
dingdongtobias
Newbie
Offline
Activity: 156
Merit: 0
|
|
November 01, 2018, 01:38:37 PM |
|
Rig with 588+7*Vega56 works well on 1.6.8, HR~14000
after update to 1.6.9 hashrate ~13900, and its not stable.
1.6.9 faster on Vega56 & Vega64 then 1.6.8 |
|
|
|
|
dingdongtobias
Newbie
Offline
Activity: 156
Merit: 0
|
|
November 01, 2018, 01:39:45 PM |
|
Hi all,
After switching to adrenaline 18.5/18.6 my hash shows 370-390 GPUs asus rog rx570. On blockchain driver I got 800h, but miner crashes after 2-3 hours.
Intensity-35, worksize-16, threads-2
Using Srb 1.6.8. win 10 x64
GPU settings voltage- 100, core-1140,memory-1980.
use the --setcomputemode must turn on |
|
|
|
|
varusisog
Member
Offline
Activity: 123
Merit: 10
|
|
November 01, 2018, 02:02:22 PM |
|
your miner not working for r9 390/390x and fury... even old tahiti with awesome miner
This miner normal work with R9 270X. Therefore it will work this 390/390X, fury and tahiti. I dont know about V1.6.9, but V1.6.8 does not work with R9 390 but it works with Fury(she with HBM memory! If someone worked on optimization for R9 FURY, she would have performed very well on all CN algo! I have a couple of r9 390 msi gaming working just fine on v1.6.8, they work perfect What is the clock speed and the hash rate? |
|
|
|
|
VulcanR
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 01, 2018, 02:03:49 PM
Last edit: November 01, 2018, 02:44:27 PM by VulcanR |
|
Hi all,
After switching to adrenaline 18.5/18.6 my hash shows 370-390 GPUs asus rog rx570. On blockchain driver I got 800h, but miner crashes after 2-3 hours.
Intensity-35, worksize-16, threads-2
Using Srb 1.6.8. win 10 x64
GPU settings voltage- 100, core-1140,memory-1980.
use the --setcomputemode must turn on ty, but compute mode is already on. On 18.6 drivers I get hash 0 or 370-390h or it just freezes even with default settings. After each miner closing, amd settings tool restores wat usage. Timings For 1:1500 and above. 777000000000000022AA1C00315A6B3CA0550F15B68C1506006AE4007C041420CA8980A90200000 01712262B612B3715 For 2:1500 and above. 777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A00200312 0150F292F94273116 |
|
|
|
|
Velmerk
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 01, 2018, 03:49:46 PM |
|
Rig with 588+7*Vega56 works well on 1.6.8, HR~14000
after update to 1.6.9 hashrate ~13900, and its not stable.
1.6.9 faster on Vega56 & Vega64 then 1.6.8 Vega56 ref 1.6.8 auto Intensity = 120 1.6.9 auto Intensity = 112, HR little bit slowly, may be the same after tuning "fragments"... |
|
|
|
|
dingdongtobias
Newbie
Offline
Activity: 156
Merit: 0
|
|
November 01, 2018, 06:19:23 PM |
|
Rig with 588+7*Vega56 works well on 1.6.8, HR~14000
after update to 1.6.9 hashrate ~13900, and its not stable.
1.6.9 faster on Vega56 & Vega64 then 1.6.8 Vega56 ref 1.6.8 auto Intensity = 120 1.6.9 auto Intensity = 112, HR little bit slowly, may be the same after tuning "fragments"... intensiti 112 give smaller hash then intensity 120 ? VERY INTERESTING!  |
|
|
|
|
Uaciuganadu
Newbie
Offline
Activity: 39
Merit: 0
|
|
November 01, 2018, 06:56:37 PM |
|
Hey Dok, I have a strange issue where the miner crashes after multiple hours and this is the end of the log: [2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
[2018-11-01 19:16:38] Restarting miner with normalv8 algo
[2018-11-01 19:16:39] Miner version: 1.6.9
[2018-11-01 19:16:39] Windows version: 10.0 build 16299
[2018-11-01 19:16:39] Video driver version: 24.20.11021.1000
[2018-11-01 19:16:40] AMD Platform ID: 1
[2018-11-01 19:16:40] AMD platform FOUND
[2018-11-01 19:16:40] Found 3 AMD devices
[2018-11-01 19:16:40] CPU AES-NI: TRUE
[2018-11-01 19:16:40] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 58.0][W: 8][T: 2][F: 4][K: 1][BUS: 6]
[2018-11-01 19:16:40] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 9]
[2018-11-01 19:16:40] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 3]
[2018-11-01 19:16:40] ADL is enabled
[2018-11-01 19:16:40] Algo switching mode enabled
[2018-11-01 19:16:40] Algo switch minimum time : 60 seconds
[2018-11-01 19:16:40] CryptonightV8 mode enabled
[2018-11-01 19:16:40] Starting init of mining threads
[2018-11-01 19:16:40] Created OCL context
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 4) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 5) loaded
|
|
|
|
|
Kgonla
Newbie
Offline
Activity: 129
Merit: 0
|
|
November 01, 2018, 07:08:50 PM |
|
For all of us who are having more or less H/s with 1.6.9 than with previous....
I think H/s shown by the program is inaccurate.
Examples:
Pressed H, shown 992 H/s
Pressed S, it says max H/s have been 985
Set worksize to 1
I press H all the time I want, always showing 0 H/s but getting some hashes
S says H/s 200+
So I think the H/s shown by the S command are OK but the ones shown by H or automatically are not.
|
|
|
|
|
Velmerk
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 01, 2018, 07:31:49 PM |
|
Vega56 ref
1.6.8 auto Intensity = 120
1.6.9 auto Intensity = 112, HR little bit slowly, may be the same after tuning "fragments"...
intensiti 112 give smaller hash then intensity 120 ? VERY INTERESTING! Yes...VERY INTERESTING! 1.6.8 auto Intensity = 120, HR ~14000 1.6.9 auto Intensity = 112, HR ~13900 1.6.9 manual Intensity = 116, HR ~13700 1.6.9 manual Intensity = 120, HR ~13800 1.6.9 manual Intensity = 124, HR ~13600 |
|
|
|
|
|
doktor83 (OP)
|
|
November 01, 2018, 08:09:13 PM |
|
For all of us who are having more or less H/s with 1.6.9 than with previous....
I think H/s shown by the program is inaccurate.
Examples:
Pressed H, shown 992 H/s
Pressed S, it says max H/s have been 985
Set worksize to 1
I press H all the time I want, always showing 0 H/s but getting some hashes
S says H/s 200+
So I think the H/s shown by the S command are OK but the ones shown by H or automatically are not.
Max is 'refreshed' every 30 seconds. You probably did not wait 30 seconds to press 'S' after you pressed 'H' and saw 992hs. 'H' shows average hashrate for a very short period, like 8-10 seconds. 'S' shows average for much more, that's why you had there 200hs. |
|
|
|
|
doktor83 (OP)
|
|
November 01, 2018, 08:11:23 PM |
|
Hey Dok, I have a strange issue where the miner crashes after multiple hours and this is the end of the log: [2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
[2018-11-01 19:16:38] Restarting miner with normalv8 algo
[2018-11-01 19:16:39] Miner version: 1.6.9
[2018-11-01 19:16:39] Windows version: 10.0 build 16299
[2018-11-01 19:16:39] Video driver version: 24.20.11021.1000
[2018-11-01 19:16:40] AMD Platform ID: 1
[2018-11-01 19:16:40] AMD platform FOUND
[2018-11-01 19:16:40] Found 3 AMD devices
[2018-11-01 19:16:40] CPU AES-NI: TRUE
[2018-11-01 19:16:40] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 58.0][W: 8][T: 2][F: 4][K: 1][BUS: 6]
[2018-11-01 19:16:40] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 9]
[2018-11-01 19:16:40] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 3]
[2018-11-01 19:16:40] ADL is enabled
[2018-11-01 19:16:40] Algo switching mode enabled
[2018-11-01 19:16:40] Algo switch minimum time : 60 seconds
[2018-11-01 19:16:40] CryptonightV8 mode enabled
[2018-11-01 19:16:40] Starting init of mining threads
[2018-11-01 19:16:40] Created OCL context
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 4) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 5) loaded
need much more info, like config file and pool, is it Monero Ocean? All i see on the log is that miner switched algo to V8 and all gpu's were initialised. |
|
|
|
Uaciuganadu
Newbie
Offline
Activity: 39
Merit: 0
|
|
November 01, 2018, 08:26:43 PM |
|
Hey Dok, I have a strange issue where the miner crashes after multiple hours and this is the end of the log: [2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
[2018-11-01 19:16:38] Restarting miner with normalv8 algo
[2018-11-01 19:16:39] Miner version: 1.6.9
[2018-11-01 19:16:39] Windows version: 10.0 build 16299
[2018-11-01 19:16:39] Video driver version: 24.20.11021.1000
[2018-11-01 19:16:40] AMD Platform ID: 1
[2018-11-01 19:16:40] AMD platform FOUND
[2018-11-01 19:16:40] Found 3 AMD devices
[2018-11-01 19:16:40] CPU AES-NI: TRUE
[2018-11-01 19:16:40] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 58.0][W: 8][T: 2][F: 4][K: 1][BUS: 6]
[2018-11-01 19:16:40] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 9]
[2018-11-01 19:16:40] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 3]
[2018-11-01 19:16:40] ADL is enabled
[2018-11-01 19:16:40] Algo switching mode enabled
[2018-11-01 19:16:40] Algo switch minimum time : 60 seconds
[2018-11-01 19:16:40] CryptonightV8 mode enabled
[2018-11-01 19:16:40] Starting init of mining threads
[2018-11-01 19:16:40] Created OCL context
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 4) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 5) loaded
need much more info, like config file and pool, is it Monero Ocean? All i see on the log is that miner switched algo to V8 and all gpu's were initialised. Hello Dok, Yes it is MoneroOcean. Here is all the info that i can gather: setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0
cls
for /f "tokens=2 delims==" %%a in ('wmic OS Get localdatetime /value') do set "dt=%%a"
set LOGTIME=%dt:~0,4%_%dt:~4,2%_%dt:~6,2%_%dt:~8,2%_%dt:~10,2%_%dt:~12,2%
set LOGTIME=%LOGTIME: =%
set LOGTIME=%LOGTIME:,=.%.txt
SRBMiner-CN.exe --config Config\config-normalv8.txt --pools pools-algoswitch.txt --logfile al_sw_%LOGTIME% --usealgoswitching --apienable --apiport 8888 --algoswitchmintime 60 --resetmineronalgoswitch --forcedshutdown --gpuerrorsalert 10 {
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 58, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 124, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 124, "worksize" : 16, "threads" : 2}
]
}Here is also the before algo switch part: [2018-11-01 19:12:23] miner_result: Pool accepted result 0x00000C8C
[2018-11-01 19:13:37] hashrate: GPU0: 1664 H/s [BUS:6]
[2018-11-01 19:13:37] hashrate: GPU1: 4358 H/s [BUS:9]
[2018-11-01 19:13:37] hashrate: GPU2: 4013 H/s [BUS:3]
[2018-11-01 19:13:37] hashrate: Total: 10035 H/s
[2018-11-01 19:14:07] miner_result: Sending user result to pool
[2018-11-01 19:14:07] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"9f854439-7175-4484-857c-2e269bb611fe","job_id":"XnL9Z1tpMADL6pchdvgee27GVYdh","nonce":"56245b55","result":"8690bfce43bc39d95f3c799424eed05ed09e22c586e3529a554c4c303b250000","algo":"cn/msr"}}
[2018-11-01 19:14:07] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-11-01 19:14:07] miner_result: Pool accepted result 0x0000253B
[2018-11-01 19:14:32] miner_result: Sending user result to pool
[2018-11-01 19:14:32] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"9f854439-7175-4484-857c-2e269bb611fe","job_id":"XnL9Z1tpMADL6pchdvgee27GVYdh","nonce":"e92ead2a","result":"3c51abaa1bebf0cfd1bfe390a53182247cf8a3086166f67e025a7b3078050000","algo":"cn/msr"}}
[2018-11-01 19:14:33] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-11-01 19:14:33] miner_result: Pool accepted result 0x00000578
[2018-11-01 19:15:37] hashrate: GPU0: 1664 H/s [BUS:6]
[2018-11-01 19:15:37] hashrate: GPU1: 4359 H/s [BUS:9]
[2018-11-01 19:15:37] hashrate: GPU2: 4014 H/s [BUS:3]
[2018-11-01 19:15:37] hashrate: Total: 10037 H/s
[2018-11-01 19:16:33] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0707f0e9ecde052eab8922c9b0af7ed8221b276d0772a4a6f4339d75e3ea71f88dedb57738a5ee000000000b40cf5e95539d38a77e184d6b1ac203bc3273790356ef2d861042d29aa28f8f06","algo":"cn/msr","variant":"msr","job_id":"STVJ6+uLiMruqeLtHisVh40wdN9z","target":"8a330000","id":"9f854439-7175-4484-857c-2e269bb611fe"}}
[2018-11-01 19:16:38] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909a9e9ecde05b7718ace0f6f876881dcaf0b3dcfc5f83a011b4996db1e8a1f3376a593ba7c50000000004529dfdd46303bbbb9c3c72d5c487b69967c43d8bd7245629f6538919700382002","algo":"cn/2","variant":"2","job_id":"lo+EIlC3lfoB1YzY5uyG84rqVlBi","target":"8a330000","id":"9f854439-7175-4484-857c-2e269bb611fe"}}
[2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
Is there any way to make the log more detailed for debug? |
|
|
|
|
|
doktor83 (OP)
|
|
November 01, 2018, 09:15:27 PM |
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
|
|
|
|
Uaciuganadu
Newbie
Offline
Activity: 39
Merit: 0
|
|
November 01, 2018, 10:29:13 PM |
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
{
"pools" :
[
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
},
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
}
]
} |
|
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 01, 2018, 11:38:17 PM |
|
I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed: https://i.imgur.com/Sxk4zwu.pngEdit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again... |
|
|
|
|
|
doktor83 (OP)
|
|
November 02, 2018, 04:40:44 AM |
|
I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed:  Edit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again... you need to cool those vegas, set the fan to 3000rpm. That is why the hashrate drops, hbm gets too hot |
|
|
|
|
doktor83 (OP)
|
|
November 02, 2018, 05:37:05 AM |
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
{
"pools" :
[
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
},
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
}
]
}OK, so no 'cryptonight_type' set here for MO. That's good. Maybe you could try dropping the --forcedshutdown, and let the miner release the gpu resources before restarting, let's see is that going to help. |
|
|
|
|
