SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[abg00]

It's the same for me. Best config for 4gb is double threads true and I 27, which gives 860. Higher intensity crashes miner in double threads, in single thread intensity is 57, but 740h/s.
Is it possible to get 1000+ on 4gb on haven and how?
8gb cards are giving 1150.

all 4gb card work with I=29 on heavy algo
rate 900+ with core=1250 mem=2000-2050

[1714865210]

1714865210

[1714865210]

1714865210

[1714865210]

1714865210

[1714865210]

1714865210

[1714865210]

1714865210

[prominertools]

SRBMiner has been added to the PMT archive:

https://prominertools.com/srbminer/

[optii]

what speeds do u guys get with cn-fast2 with vegas? what settings do u use? i switched from fast to fast 2 without changing other settings and i dropped from 3950 to 2200 hs

[livada]

what speeds do u guys get with cn-fast2 with vegas? what settings do u use? i switched from fast to fast 2 without changing other settings and i dropped from 3950 to 2200 hs

vega 56 3500+(hynix)
vega 56 3800+(samsung)
vega 64 3900+(samsung)

int 112-120 work 8-16

must use litle freq or give more power

[playfast]

I tested higher "thread_delay" settings than the default 319. I found 440 is the highest I could go and still keep the max hashrate.
There seems to be less hashrate fluctuation at 440, so I guess it's not just placebo and actually does make the rig a tiny bit more stable 

[diansari]

I use RX550 4g, I can't mine turtle algo..    someone can help

[doktor83]

I use RX550 4g, I can't mine turtle algo..    someone can help

You need to provide more info if you want help.

[diansari]

I use RX550 4g, I can't mine turtle algo..    someone can help

You need to provide more info if you want help.

Recommended drivers     : Adrenalin 18.5.1, 18.5.2 or 18.6.1
Algorithm               : Cryptonight Turtle
Algo switching          : disabled
Startup monitor         : enabled
Gpu watchdog            : enabled [gpu disable mode]


[2019-01-30 00:05:47] Pools defined -> 1
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[5] ...
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[5] ...
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[3] ...
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[3] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[4] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[4] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[2] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[2] ...
[2019-01-30 00:05:49] ADL initialised successfully
[2019-01-30 00:05:49] Connected to mining-sg.wrkz.work:5555
[2019-01-30 00:05:49] User logged in
[2019-01-30 00:05:49] Pool difficulty: 20000
[2019-01-30 00:05:49] Pool sent a new job (ID: 236238663152108)
[2019-01-30 00:06:07] Pool difficulty: 11111
[2019-01-30 00:06:07] Pool sent a new job (ID: 659830064713306)
[2019-01-30 00:06:30] Warning: Too many compute errors -> GPU BUS_ID[5] (15)
[2019-01-30 00:06:33] Warning: Too many compute errors -> GPU BUS_ID[5] (16)
[2019-01-30 00:06:33] Warning: Too many compute errors -> GPU BUS_ID[5] (17)
[2019-01-30 00:06:33] Warning: Too many compute errors -> GPU BUS_ID[5] (18)
[2019-01-30 00:06:39] Warning: Too many compute errors -> GPU BUS_ID[5] (19)
[2019-01-30 00:06:44] Warning: Too many compute errors -> GPU BUS_ID[4] (15)

[doktor83]

I use RX550 4g, I can't mine turtle algo..    someone can help

You need to provide more info if you want help.

Recommended drivers     : Adrenalin 18.5.1, 18.5.2 or 18.6.1
Algorithm               : Cryptonight Turtle
Algo switching          : disabled
Startup monitor         : enabled
Gpu watchdog            : enabled [gpu disable mode]


[2019-01-30 00:05:47] Pools defined -> 1
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[5] ...
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[5] ...
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[3] ...
[2019-01-30 00:05:48] Loading [turtle] kernel for DEVICE BUS_ID[3] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[4] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[4] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[2] ...
[2019-01-30 00:05:49] Loading [turtle] kernel for DEVICE BUS_ID[2] ...
[2019-01-30 00:05:49] ADL initialised successfully
[2019-01-30 00:05:49] Connected to mining-sg.wrkz.work:5555
[2019-01-30 00:05:49] User logged in
[2019-01-30 00:05:49] Pool difficulty: 20000
[2019-01-30 00:05:49] Pool sent a new job (ID: 236238663152108)
[2019-01-30 00:06:07] Pool difficulty: 11111
[2019-01-30 00:06:07] Pool sent a new job (ID: 659830064713306)
[2019-01-30 00:06:30] Warning: Too many compute errors -> GPU BUS_ID[5] (15)
[2019-01-30 00:06:33] Warning: Too many compute errors -> GPU BUS_ID[5] (16)
[2019-01-30 00:06:33] Warning: Too many compute errors -> GPU BUS_ID[5] (17)
[2019-01-30 00:06:33] Warning: Too many compute errors -> GPU BUS_ID[5] (18)
[2019-01-30 00:06:39] Warning: Too many compute errors -> GPU BUS_ID[5] (19)
[2019-01-30 00:06:44] Warning: Too many compute errors -> GPU BUS_ID[4] (15)

You should try one of the recommended drivers

[hapsal]

Warning: Too many compute errors -> GPU BUS_ID[1]  The same problem with the turtle. RX550 2g

[morinfen]

The same problem appeared today, after two minutes of normal work mistakes pour

[2019-01-30 21:46:58] Pool difficulty: 25911
[2019-01-30 21:46:58] Pool sent a new job (ID: 481557346041624)
[2019-01-30 21:47:18] Pool sent a new job (ID: 805977737955660)
[2019-01-30 21:47:56] Pool sent a new job (ID: 138872683910235)
[2019-01-30 21:48:22] Warning: Too many compute errors -> GPU BUS_ID[1] (15)
[2019-01-30 21:48:22] Warning: Too many compute errors -> GPU BUS_ID[1] (16)
[2019-01-30 21:48:28] Pool difficulty: 17274
[2019-01-30 21:48:28] Pool sent a new job (ID: 684682065991684)
[2019-01-30 21:48:45] Warning: Too many compute errors -> GPU BUS_ID[1] (17)

rx 550 2gb - drivers 18.5.1

[roman73]

hi dok
problem on haven and masari
in 0.1 - 8 hours

dns on rig  8.8.8.8

set
"reboot_script_gpu_watchdog" : "reboot-windows.bat",
"reboot_script_min_rig_speed": "reboot-windows.bat",
"min_rig_speed_duration" : 30,
"min_rig_speed" : 6000,
dont work



[2019-01-30 22:49:45] GPU0 :    1235 H/s [T: 50c, RPM: 1439, CC: 1300 MHz, MC: 1975 MHz][BUS:1]
[2019-01-30 22:49:45] GPU1 :    1246 H/s [T: 50c, RPM: 1284, CC: 1300 MHz, MC: 2000 MHz][BUS:3]
[2019-01-30 22:49:45] GPU2 :    1256 H/s [T: 46c, RPM: 1290, CC: 1300 MHz, MC: 2025 MHz][BUS:4]
[2019-01-30 22:49:45] GPU3 :    1248 H/s [T: 49c, RPM: 1721, CC: 1300 MHz, MC: 2010 MHz][BUS:5]
[2019-01-30 22:49:45] GPU4 :    1248 H/s [T: 55c, RPM: 1772, CC: 1300 MHz, MC: 2010 MHz][BUS:6]
[2019-01-30 22:49:45] Total:    6233 H/s
[2019-01-30 22:51:45] GPU0 :    1234 H/s [T: 47c, RPM: 1435, CC: 1300 MHz, MC: 1975 MHz][BUS:1]
[2019-01-30 22:51:45] GPU1 :    1246 H/s [T: 49c, RPM: 1292, CC: 1300 MHz, MC: 2000 MHz][BUS:3]
[2019-01-30 22:51:45] GPU2 :    1256 H/s [T: 49c, RPM: 1280, CC: 1300 MHz, MC: 2025 MHz][BUS:4]
[2019-01-30 22:51:45] GPU3 :    1248 H/s [T: 53c, RPM: 1701, CC: 1300 MHz, MC: 2010 MHz][BUS:5]
[2019-01-30 22:51:45] GPU4 :    1248 H/s [T: 57c, RPM: 1789, CC: 1300 MHz, MC: 2010 MHz][BUS:6]
[2019-01-30 22:51:45] Total:    6232 H/s
[2019-01-30 22:53:45] Warning! Could not connect to a devfee pool for a long time. Please check you firewall/antivirus is not blocking connections. Until then i will take a break.
[2019-01-30 22:53:45] GPU devices disabled!
[2019-01-30 22:53:45] GPU0 :    0 H/s [T: 50c, RPM: 1476, CC: 1300 MHz, MC: 1975 MHz][BUS:1]
[2019-01-30 22:53:45] GPU1 :    0 H/s [T: 50c, RPM: 1327, CC: 1300 MHz, MC: 2000 MHz][BUS:3]
[2019-01-30 22:53:45] GPU2 :    0 H/s [T: 47c, RPM: 1399, CC: 1300 MHz, MC: 2025 MHz][BUS:4]
[2019-01-30 22:53:45] GPU3 :    0 H/s [T: 54c, RPM: 1667, CC: 1300 MHz, MC: 2010 MHz][BUS:5]
[2019-01-30 22:53:45] GPU4 :    0 H/s [T: 54c, RPM: 1852, CC: 1300 MHz, MC: 2010 MHz][BUS:6]
[2019-01-30 22:53:45] Total:    0 H/s
[2019-01-30 22:55:44] Pool sent a new job (ID: 383804439266256)
[2019-01-30 22:55:45] GPU0 :    0 H/s [T: 22c, RPM: 1501, CC: 1300 MHz, MC: 1975 MHz][BUS:1]
[2019-01-30 22:55:45] GPU1 :    0 H/s [T: 23c, RPM: 1408, CC: 1300 MHz, MC: 2000 MHz][BUS:3]
[2019-01-30 22:55:45] GPU2 :    0 H/s [T: 23c, RPM: 1427, CC: 1300 MHz, MC: 2025 MHz][BUS:4]
[2019-01-30 22:55:45] GPU3 :    0 H/s [T: 23c, RPM: 1699, CC: 1300 MHz, MC: 2010 MHz][BUS:5]
[2019-01-30 22:55:45] GPU4 :    0 H/s [T: 28c, RPM: 1884, CC: 1300 MHz, MC: 2010 MHz][BUS:6]
[2019-01-30 22:55:45] Total:    0 H/s
[2019-01-30 22:56:54] Pool sent a new job (ID: 960302344661752)
[2019-01-30 22:57:45] GPU0 :    0 H/s [T: 20c, RPM: 1498, CC: 1300 MHz, MC: 1975 MHz][BUS:1]
[2019-01-30 22:57:45] GPU1 :    0 H/s [T: 20c, RPM: 1419, CC: 1300 MHz, MC: 2000 MHz][BUS:3]
[2019-01-30 22:57:45] GPU2 :    0 H/s [T: 20c, RPM: 1431, CC: 1300 MHz, MC: 2025 MHz][BUS:4]
[2019-01-30 22:57:45] GPU3 :    0 H/s [T: 21c, RPM: 1703, CC: 1300 MHz, MC: 2010 MHz][BUS:5]
[2019-01-30 22:57:45] GPU4 :    0 H/s [T: 25c, RPM: 1874, CC: 1300 MHz, MC: 2010 MHz][BUS:6]
[2019-01-30 22:57:45] Total:    0 H/s
[2019-01-30 22:58:06] Pool sent a new job (ID: 241675729790020)
[2019-01-30 22:58:12] Pool sent a new job (ID: 472532319248483)

[optii]

what speeds do u guys get with cn-fast2 with vegas? what settings do u use? i switched from fast to fast 2 without changing other settings and i dropped from 3950 to 2200 hs

vega 56 3500+(hynix)
vega 56 3800+(samsung)
vega 64 3900+(samsung)

int 112-120 work 8-16

must use litle freq or give more power

what is ur freq and mv and memory and mv on vega 56 (samsung) and int and work? maybe if u can SS the overdrive tool for it that would be great. which adrenaline are u using?

[doktor83]

Warning: Too many compute errors -> GPU BUS_ID[1]  The same problem with the turtle. RX550 2g

The same problem appeared today, after two minutes of normal work mistakes pour

[2019-01-30 21:46:58] Pool difficulty: 25911
[2019-01-30 21:46:58] Pool sent a new job (ID: 481557346041624)
[2019-01-30 21:47:18] Pool sent a new job (ID: 805977737955660)
[2019-01-30 21:47:56] Pool sent a new job (ID: 138872683910235)
[2019-01-30 21:48:22] Warning: Too many compute errors -> GPU BUS_ID[1] (15)
[2019-01-30 21:48:22] Warning: Too many compute errors -> GPU BUS_ID[1] (16)
[2019-01-30 21:48:28] Pool difficulty: 17274
[2019-01-30 21:48:28] Pool sent a new job (ID: 684682065991684)
[2019-01-30 21:48:45] Warning: Too many compute errors -> GPU BUS_ID[1] (17)

rx 550 2gb - drivers 18.5.1

All good on Rx550 & 18.6.1 drivers guys :

[morinfen]

reinstalled the driver and it worked

[doktor83]

reinstalled the driver and it worked

Always DDU first, and then install new drivers, never install new drivers over old.

[tanatana]

For a pool https://pool.webchain.network video card how to write a worker's name
it's about the coin webchain

[big_daddy]

reinstalled the driver and it worked

Always DDU first, and then install new drivers, never install new drivers over old.

and if the driver is the last one, before DDU you have to disable the automatic AMD update of drivers in W10

[doktor83]

For a pool https://pool.webchain.network video card how to write a worker's name
it's about the coin webchain

{
"pools" :
[
   {"pool" : "pool.webchain.network:3333",
    "wallet" : "your-wallet",
    "password" : "x",
    "worker" : "worker-name-here"
    }
]
}

[tanatana]

Cпacибo doktor83