SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[glebk]

Yes, your pools.txt is fine:
Initializing OpenCL devices, please wait...

GPU0: AMD Radeon HD 7800 Series [pitcairn] [2048 MB][I: 48.0][W: 8][T: 2][F: 8][BUS: 3]

----------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.7.9
DevFee ~0.85%

Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
----------------------------------------------------------------------------------------

Recommended drivers     : Adrenalin 18.5.1, 18.5.2 or 18.6.1
Algorithm               : Cryptonight Turtle
Algo switching          : enabled
Startup monitor         : enabled
Gpu watchdog            : enabled [gpu disable mode]
Coin forking            : enabled


[2019-02-26 00:51:02] Pools defined -> 1
[2019-02-26 00:51:02] Loading [turtle] kernel for DEVICE BUS_ID[3]
[2019-02-26 00:51:02] Loading [turtle] kernel for DEVICE BUS_ID[3]
[2019-02-26 00:51:02] ADL initialised successfully
[2019-02-26 00:51:04] SSL/TLS fingerprint: SHA256:YpLq/JK3V2rjpUZjaG/HoPTB8t7c8nnS1qzrlUuOIIM=
[2019-02-26 00:51:04] Connected to turtle.miner.rocks:5005
[2019-02-26 00:51:04] User logged in
[2019-02-26 00:51:04] Pool difficulty: 30000
[2019-02-26 00:51:04] Pool sent a new job (ID: 301478402836620) [turtle]
[2019-02-26 00:51:07] Pool accepted result 0x0001440F [77ms]
[2019-02-26 00:51:14] Pool sent a new job (ID: 506642665431597) [turtle]
=====

So the problem is with format 'address.PaymentID'
This pools.txt is not connecting:
{
"pools" :
[
   {
      "pool" : "turtle.miner.rocks:5005",
      "wallet" : "TRTLv1Hqo3wHdqLRXuCyX3MwvzKyxzwXeBtycnkDy8ceFp4E23bm3P467xLEbUusH6Q1mqQUBiYwJ2y ULJbvr5nKe8kcyc4uyps.0b7ac34b8b0921ad119d39d7a83329b1e828101f16279f932ff3fc1aa5 58dae4",
      "password" : "w=7850x1",
      "pool_use_tls" : true
   }
]

}

and format ADDRESS.PAYMENT_ID.DIFF does not help too:
TRTLv1Hqo3wHdqLRXuCyX3MwvzKyxzwXeBtycnkDy8ceFp4E23bm3P467xLEbUusH6Q1mqQUBiYwJ2y ULJbvr5nKe8kcyc4uyps.0b7ac34b8b0921ad119d39d7a83329b1e828101f16279f932ff3fc1aa5 58dae4.3000

producing this log:
[2019-02-26 00:57:48] Gpu watchdog started
[2019-02-26 00:57:48] API disabled
[2019-02-26 00:57:49] socket_ssl: SSL/TLS fingerprint: SHA256:YpLq/JK3V2rjpUZjaG/HoPTB8t7c8nnS1qzrlUuOIIM=
[2019-02-26 00:57:49] json_send[1023]: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"TRTLv1Hqo3wHdqLRXuCyX3MwvzKyxzwXeBtycnkDy8ceFp4E23bm3P467xLEbUusH6Q1mqQUBiYwJ2y ULJbvr5nKe8kcyc4uyps.0b7ac34b8b0921ad119d39d7a83329b1e828101f16279f932ff3fc1aa5 58dae4.30000","pass":"w=7850x1","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.9","rigid":"","algo":["cn/xao","cn/rto","cn/b2n","cn-heavy/tube","cn/ccx","cn/msr","cn/fast2","cn/half","cn/gpu","cn-heavy/xhv","cn-heavy/0","cn/hosp","cn/hyc","cn/ita","cn-lite/1","cn/mkt","cn/mox","cn/0","cn/r","cn/1","cn/2","cn/xtlv9","cn-pico/trtl","cn/upx","cn/web","cn/wow","cn/heavyx","cn/zls"],"algo-perf":{"cn/xao": 1.0,"cn/rto": 1.0,"cn/b2n": 1.0,"cn-heavy/tube": 1.0,"cn/ccx": 1.0,"cn/msr": 1.0,"cn/fast2": 1.0,"cn/gpu": 1.0,"cn-heavy/xhv": 1.0,"cn-heavy/0": 1.0,"cn/hosp": 1.0,"cn/hyc": 1.0,"cn/ita": 1.0,"cn-lite/1": 1.0,"cn/mkt": 1.0,"cn/mox": 1.0,"cn/0": 1.0,"cn/r": 1.0,"cn/1": 1.0,"cn/2": 1.0,"cn/xtlv9": 1.0,"cn-pico/trtl": 1.0,"cn/upx": 1.0,"cn/web": 1.0,"cn/wow": 1.0,"cn/heavyx": 1.0,"cn/zls": 1.0},"alg[2019-02-26 00:58:09] json_send: Pool not responding - possible network error
[2019-02-26 00:58:09] sock_ready: Couldn't login to pool, please check your wallet address
[2019-02-26 00:58:09] Switching to next pool turtle.miner.rocks:5005

[2019-02-26 00:58:09] Cryptonight type is not set for this pool. Currently using turtle
[2019-02-26 00:58:09] socket_ssl: SSL/TLS fingerprint: SHA256:YpLq/JK3V2rjpUZjaG/HoPTB8t7c8nnS1qzrlUuOIIM=
[2019-02-26 00:58:09] json_send[1023]: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"TRTLv1Hqo3wHdqLRXuCyX3MwvzKyxzwXeBtycnkDy8ceFp4E23bm3P467xLEbUusH6Q1mqQUBiYwJ2y ULJbvr5nKe8kcyc4uyps.0b7ac34b8b0921ad119d39d7a83329b1e828101f16279f932ff3fc1aa5 58dae4.30000","pass":"w=7850x1","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.9","rigid":"","algo":["cn/xao","cn/rto","cn/b2n","cn-heavy/tube","cn/ccx","cn/msr","cn/fast2","cn/half","cn/gpu","cn-heavy/xhv","cn-heavy/0","cn/hosp","cn/hyc","cn/ita","cn-lite/1","cn/mkt","cn/mox","cn/0","cn/r","cn/1","cn/2","cn/xtlv9","cn-pico/trtl","cn/upx","cn/web","cn/wow","cn/heavyx","cn/zls"],"algo-perf":{"cn/xao": 1.0,"cn/rto": 1.0,"cn/b2n": 1.0,"cn-heavy/tube": 1.0,"cn/ccx": 1.0,"cn/msr": 1.0,"cn/fast2": 1.0,"cn/gpu": 1.0,"cn-heavy/xhv": 1.0,"cn-heavy/0": 1.0,"cn/hosp": 1.0,"cn/hyc": 1.0,"cn/ita": 1.0,"cn-lite/1": 1.0,"cn/mkt": 1.0,"cn/mox": 1.0,"cn/0": 1.0,"cn/r": 1.0,"cn/1": 1.0,"cn/2": 1.0,"cn/xtlv9": 1.0,"cn-pico/trtl": 1.0,"cn/upx": 1.0,"cn/web": 1.0,"cn/wow": 1.0,"cn/heavyx": 1.0,"cn/zls": 1.0},"alg[2019-02-26 00:58:09] json_send: Couldn't send - {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"TRTLv1Hqo3wHdqLRXuCyX3MwvzKyxzwXeBtycnkDy8ceFp4E23bm3P467xLEbUusH6Q1mqQUBiYwJ2y ULJbvr5nKe8kcyc4uyps.0b7ac34b8b0921ad119d39d7a83329b1e828101f16279f932ff3fc1aa5 58dae4.30000","pass":"w=7850x1","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.9","rigid":"","algo":["cn/xao","cn/rto","cn/b2n","cn-heavy/tube","cn/ccx","cn/msr","cn/fast2","cn/half","cn/gpu","cn-heavy/xhv","cn-heavy/0","cn/hosp","cn/hyc","cn/ita","cn-lite/1","cn/mkt","cn/mox","cn/0","cn/r","cn/1","cn/2","cn/xtlv9","cn-pico/trtl","cn/upx","cn/web","cn/wow","cn/heavyx","cn/zls"],"algo-perf":{"cn/xao": 1.0,"cn/rto": 1.0,"cn/b2n": 1.0,"cn-heavy/tube": 1.0,"cn/ccx": 1.0,"cn/msr": 1.0,"cn/fast2": 1.0,"cn/gpu": 1.0,"cn-heavy/xhv": 1.0,"cn-heavy/0": 1.0,"cn/hosp": 1.0,"cn/hyc": 1.0,"cn/ita": 1.0,"cn-lite/1": 1.0,"cn/mkt": 1.0,"cn/mox": 1.0,"cn/0": 1.0,"cn/r": 1.0,"cn/1": 1.0,"cn/2": 1.0,"cn/xtlv9": 1.0,"cn-pico/trtl": 1.0,"cn/upx": 1.0,"cn/web": 1.0,"cn/wow": 1.0,"cn/heavyx": 1.0,"cn/zls": 1.0},"alg[2019-02-26 00:58:09] sock_ready: Couldn't login to pool, please check your wallet address
[2019-02-26 00:58:09] Switching to next pool turtle.miner.rocks:5005

1.7.8 is Ok with this:
[2019-02-26 01:02:52] Startup monitor detached
[2019-02-26 01:02:52] Gpu watchdog started
[2019-02-26 01:02:52] API disabled
[2019-02-26 01:02:53] socket_ssl: SSL/TLS fingerprint: SHA256:YpLq/JK3V2rjpUZjaG/HoPTB8t7c8nnS1qzrlUuOIIM=
[2019-02-26 01:02:53] json_send[309]: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"TRTLv1Hqo3wHdqLRXuCyX3MwvzKyxzwXeBtycnkDy8ceFp4E23bm3P467xLEbUusH6Q1mqQUBiYwJ2y ULJbvr5nKe8kcyc4uyps.0b7ac34b8b0921ad119d39d7a83329b1e828101f16279f932ff3fc1aa5 58dae4","pass":"w=7850x1","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.8","rigid":""}}
[2019-02-26 01:02:53] json_receive[324]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"207090789511443","job":{"blob":"0100ebafd1e305a01294ef2bfbea9c5238f21952dcdc5131573a2afebe5a58d9bcb840cc95f9e60 0000000b23ecbc38cda1b9fef42d080ff2f281a8d75a00037a532b2e74d6858c2788f3701","job_id":"985948623670133","target":"61590100","blockMajorVersion":5},"status":"OK"}}
[2019-02-26 01:02:53] Connected to turtle.miner.rocks:5005
[2019-02-26 01:02:53] sock_ready: User logged in

[doktor83]

1.7.8 is Ok with this:

1.7.9 will be ok too just remove the algoswitching or enablecoinforking parameter, you dont have any of those enabled on 178 thats why it is working.
Also you dont need the coinforking param right now if you are mining turtle

[Csouza]

You are probably using xmr stak settings here. well don't. Try out auto setup.
Vega56 @ 1450/900 = 1750khs on 110/32/2 F0

Tks Dok, now are very well

GPU2 [9]   Radeon RX Vega   1450   900   53   3309   0   1764
GPU3 [19]   Radeon RX Vega   1450   900   58   3270   0   1762
GPU4 [12]   Radeon RX Vega   1450   900   57   4558   0   1764
GPU5 [16]   Radeon RX Vega   1450   900   56   3114   0   1762

[thenextdinosaur]

Sometimes when pool requests an algorithm change to cn-wow, I think the miner doesn't release GPUs correctly and it ends up crashing them. The miner reports that one or more GPUs crashed, and it also shows they're hashing with maybe 10-15% of the normal hashrate. After a few minutes the miner restarts because I've set a minimum rig speed. I didn't have this issue before when cn-wow wasn't present, so I think it's related to the algo itself. I was under the impression this algorithm would work with cnv8 clocks/settings.

[doktor83]

Sometimes when pool requests an algorithm change to cn-wow, I think the miner doesn't release GPUs correctly and it ends up crashing them. The miner reports that one or more GPUs crashed, and it also shows they're hashing with maybe 10-15% of the normal hashrate. After a few minutes the miner restarts because I've set a minimum rig speed. I didn't have this issue before when cn-wow wasn't present, so I think it's related to the algo itself. I was under the impression this algorithm would work with cnv8 clocks/settings.

a logical thing to do would be to try out your wow settings without algo switching, so you will know is it related to gpu's not released correctly, driver crash, or it's just the algo.

[thenextdinosaur]

a logical thing to do would be to try out your wow settings without algo switching, so you will know is it related to gpu's not released correctly, driver crash, or it's just the algo.

Agreed. I left the miner mining exclusively cn-wow for the last 5 hours and had zero problems so far. In an algo-switching scenario I'd have already encountered at least 6-7 crashes in the same time frame - it really depends on how many times the algorithm switches. It might be also helpful to say that this crash happens sometimes and right after the algo switch. Sometimes it will switch to cn-wow and mine normally, sometimes it will lead to crashing GPUs and subsequently mining with 10-15% of the hashrate until miner restarts.

I can leave it mining wownero for a longer time, but I'm almost ready to discard this being an overclock issue.

[doktor83]

a logical thing to do would be to try out your wow settings without algo switching, so you will know is it related to gpu's not released correctly, driver crash, or it's just the algo.

Agreed. I left the miner mining exclusively cn-wow for the last 5 hours and had zero problems so far. In an algo-switching scenario I'd have already encountered at least 6-7 crashes in the same time frame - it really depends on how many times the algorithm switches. It might be also helpful to say that this crash happens sometimes and right after the algo switch. Sometimes it will switch to cn-wow and mine normally, sometimes it will lead to crashing GPUs and subsequently mining with 10-15% of the hashrate until miner restarts.

I can leave it mining wownero for a longer time, but I'm almost ready to discard this being an overclock issue.

Is the miner crashing or the video driver? Do you get the 'hardware blocked..' system message ?

[thenextdinosaur]

Is the miner crashing or the video driver? Do you get the 'hardware blocked..' system message ?

The miner doesn't crash (the window doesn't close). The message I receive is from watchdog "GPU crash detected, miner will try to restart".

[sharix80]

Hi, doktor83!
Mox algo show rejected result on 1.7.9, but 1.7.8 works fine! Please, fix it. Thanks for you job!

[Frianik]

One issue that I've been getting since earlier versions is that, while mining on a pool with multi-algo support (MO), sometimes the miner will just close without any apparent reason. The command prompt window just closes. When checking the log, nothing abnormal was happening. Sometimes the last line on the log is an algo change, sometimes is submitting a share. Miner just closes. Any idea of what may cause that or what else can I do to test more and provide more feedback?

i have the same issue. randomly closes at multialgo and work like a charm for weeks at single algo. rigs 8-9 vegas. nothing unusual in logs.

[GKumaran]

Hi, doktor83!
Mox algo show rejected result on 1.7.9, but 1.7.8 works fine! Please, fix it. Thanks for you job!

Please read the release notes. Thanks for scrolling up.

[thenextdinosaur]

i have the same issue. randomly closes at multialgo and work like a charm for weeks at single algo. rigs 8-9 vegas. nothing unusual in logs.

The developer said he hoped this would be fixed in this new version, but today I experienced it again: the miner window closed by itself and there wasn't anything unusual in the logs, just normal mining.

[doktor83]

i have the same issue. randomly closes at multialgo and work like a charm for weeks at single algo. rigs 8-9 vegas. nothing unusual in logs.

The developer said he hoped this would be fixed in this new version, but today I experienced it again: the miner window closed by itself and there wasn't anything unusual in the logs, just normal mining.

Could you guys tell me which version of windows 10 are you using?
I have a feeling it is older than 1809.

[thenextdinosaur]

I have a feeling it is older than 1809.

1803.

[jasonyslai]

Will srbminer support CryptoNightR soon  ?

[Baikal miner]

http://prntscr.com/mrj02u why webchain not work?

[sharix80]

Will srbminer support CryptoNightR soon  ?

I think its Cryptonight V4 (R)

[livada]

http://prntscr.com/mrj02u why webchain not work?

all work fine.

http://imgbox.com/TpGFLAvl

[Frianik]

i have the same issue. randomly closes at multialgo and work like a charm for weeks at single algo. rigs 8-9 vegas. nothing unusual in logs.

The developer said he hoped this would be fixed in this new version, but today I experienced it again: the miner window closed by itself and there wasn't anything unusual in the logs, just normal mining.

Could you guys tell me which version of windows 10 are you using?
I have a feeling it is older than 1809.

1803 too

[sky2018miner]

Hello dear developer
faced with incomprehensible message in miner:

warning:linking two modules of different data layouts
warning: linking two modules of different target triples:input.bc''amdil64-pc-unknown-amdopencl and
amdil -pc-unknown-amdopencl

strange but the message is not displayed in the log
what could be the problem