doktor83 (OP)
|
|
March 15, 2019, 01:31:55 PM |
|
i test new one but i have same problem .
Ok, could you please test without algo switching, and without --enablecoinforking ? We need to isolate things. In the meantime i will prepare a version with lot of debugging that could maybe help me find where/what the problem is yes . why not? i use this SRBMiner-CN.exe --config Config\config-normalv4.txt --pools pools.txt --logfile %LOGTIME% Yes this will be ok, so if it works ok without algo switching enabled then i will at least know it is something in that part Thank you
|
|
|
|
|
|
|
In order to get the maximum amount of activity points possible, you just need to post once per day on average. Skipping days is OK as long as you maintain the average.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 15, 2019, 02:26:12 PM |
|
i test new one but i have same problem .
Ok, could you please test without algo switching, and without --enablecoinforking ? We need to isolate things. In the meantime i will prepare a version with lot of debugging that could maybe help me find where/what the problem is yes . why not? i use this SRBMiner-CN.exe --config Config\config-normalv4.txt --pools pools.txt --logfile %LOGTIME% Yes this will be ok, so if it works ok without algo switching enabled then i will at least know it is something in that part Thank you its crash again. i like to do something. your welcome. [2019-03-15 17:29:57] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"05cfbae8","result":"a60639fb8eed0cbf2f1f6b9d87298ea7f45f3cce08c414c8287a8586df7b0000"}} [2019-03-15 17:29:57] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:29:57] miner_result: Pool accepted result 0x00007BDF for job[30] [151ms] [2019-03-15 17:30:01] miner_result: Sending user result to pool [2019-03-15 17:30:01] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"26c45df4","result":"ad96beb9ee50671573575b56b063b2a0b2416f2a473bad2996ccd94a0c7e0000"}} [2019-03-15 17:30:02] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:02] miner_result: Pool accepted result 0x00007E0C for job[30] [129ms] [2019-03-15 17:30:06] miner_result: Sending user result to pool [2019-03-15 17:30:06] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"414c2f3a","result":"1d5b2d598b27fad617967dc81dac99c55194637bd02bf39a08b22cd2ff0b0000"}} [2019-03-15 17:30:06] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:06] miner_result: Pool accepted result 0x00000BFF for job[30] [129ms] [2019-03-15 17:30:06] miner_result: Sending user result to pool [2019-03-15 17:30:06] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"ecc60080","result":"71e8e874cd52ee68cc2a693673991715c56896063559f13510c3c4f5964d0000"}} [2019-03-15 17:30:07] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:07] miner_result: Pool accepted result 0x00004D96 for job[30] [132ms] [2019-03-15 17:30:07] miner_result: Sending user result to pool [2019-03-15 17:30:07] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"2ade5d74","result":"0299d63485f9e9a42b4aa541c8a327344aeae2876dd19a506990f807e5660000"}} [2019-03-15 17:30:08] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:08] miner_result: Pool accepted result 0x000066E5 for job[30] [126ms] [2019-03-15 17:30:10] miner_result: Sending user result to pool [2019-03-15 17:30:10] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"8d327551","result":"0aed86218cfbe3e34379a893c22a4142865b094b47e4654dc5949ee14d600000"}} [2019-03-15 17:30:10] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:10] miner_result: Pool accepted result 0x0000604D for job[30] [125ms] [2019-03-15 17:30:12] miner_result: Sending user result to pool [2019-03-15 17:30:12] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"95c2a30b","result":"a424b84be79db5d9007e32382c39761e81b1493a744aed4035def840d3490000"}} [2019-03-15 17:30:12] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:12] miner_result: Pool accepted result 0x000049D3 for job[30] [139ms] [2019-03-15 17:30:24] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"height":1791257,"blob":"0b0bf6dfaee4059410bd9786ac1aa117b5893c4ad08f1d7933a731a2625fffbb09d6e0a3d12f7f0 0000000804ca7b734b76c4d8fe17b2c441ba9a7b63991e9b4b3c6d91ac72135a5983b7e01","job_id":"495865455132168","target":"85980000"}} [2019-03-15 17:30:24] pool_have_job: Pool sent a new job[31], block height 1791257 (ID: 495865455132168)
|
|
|
|
doktor83 (OP)
|
|
March 15, 2019, 02:35:44 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you.
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 15, 2019, 03:10:59 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not.
|
|
|
|
XSlowHand
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 15, 2019, 06:45:14 PM |
|
i test new one but i have same problem .
Ok, could you please test without algo switching, and without --enablecoinforking ? We need to isolate things. In the meantime i will prepare a version with lot of debugging that could maybe help me find where/what the problem is I have the same issue on every miner. v4 very unstable. v8 was running for weeks without issues. "Accidental"/Forced Windows updates was basically the only downtime (can we hide behind a proxy btw? do you or will you support this one day?) I have some 4xx and ALL 5xx cards and Vega Rigs (small farm). Willing to help debug in any way.
|
|
|
|
doktor83 (OP)
|
|
March 15, 2019, 07:08:37 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? I have the same issue on every miner. v4 very unstable. v8 was running for weeks without issues. "Accidental"/Forced Windows updates was basically the only downtime (can we hide behind a proxy btw? do you or will you support this one day?) I have some 4xx and ALL 5xx cards and Vega Rigs (small farm). Willing to help debug in any way.
Are you using v1.8.0 ? Also mining on minexmr.com ? Issue shows only on v4 ? About the proxy, what do you mean will i support it ? Miner doesnt check/care where you connect as long as it can contact the devfee pools
|
|
|
|
rotaryfurball
Newbie
Offline
Activity: 13
Merit: 0
|
|
March 15, 2019, 09:26:17 PM |
|
Any updates on when a reliable version will be out
|
|
|
|
AVP
Newbie
Offline
Activity: 96
Merit: 0
|
|
March 15, 2019, 10:47:36 PM |
|
This is the problem I keep having:
After reboot, display GPU or first GPU / GPU 0 will always crash after miner is started immediately as pool sends 1st job. Other GPU's are fine, but only the one connected to display, or GPU 0 has this issue and its reproducible on 2 identical rigs so I know its not a hardware issue. Then after I close the miner and start it second time, everything is fine.
Steps to reproduce: - Reboot PC - Start miner, wait till received job from pool, observe crash, hit H and GPU overclock is reset to default clock - Close miner, restart miner, works fine after that
Using RX 470s, GRAFT algo.
Anyone else having similar issue? Doc is this something that could be fixed ?
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 15, 2019, 11:10:02 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? yes they connect to same pool and they have same setting. in both mode ( auto dif and var diff ) liq crash .but air is stable .just different in OC an intensity . i set it same but got crash. i set diff avg 1 to 30 Sec but nothing change. also set in auto diff but it's stop working. cpu use 3%-5% not more
|
|
|
|
patmontes
Newbie
Offline
Activity: 8
Merit: 0
|
|
March 16, 2019, 01:40:29 AM |
|
Hi Dok, In which screen or log can I verify if gpureorder is working?
|
|
|
|
cobraq
Newbie
Offline
Activity: 18
Merit: 0
|
|
March 16, 2019, 04:22:36 AM |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
|
|
|
|
UnclWish
|
|
March 16, 2019, 05:50:23 AM |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
Try to set it 104, 112, 118. Your card can more. 71 - is not optimal for 8Gb card. I'm use TRM cause it gives +50 h/s on one of my RX 588 cards. You can try it too.
|
|
|
|
doktor83 (OP)
|
|
March 16, 2019, 07:41:57 AM |
|
Hi Dok, In which screen or log can I verify if gpureorder is working?
compare the busid values with the ones in overdriventool
|
|
|
|
doktor83 (OP)
|
|
March 16, 2019, 07:44:05 AM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? yes they connect to same pool and they have same setting. in both mode ( auto dif and var diff ) liq crash .but air is stable .just different in OC an intensity . i set it same but got crash. i set diff avg 1 to 30 Sec but nothing change. also set in auto diff but it's stop working. cpu use 3%-5% not more I have 1.8.0 running on minexmr with the lowest stat. diff for 10 hours on a mixed rig still without issues. When i get some time i will prepare that version with lots of debug info for me, maybe something can be fixed.
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 16, 2019, 08:25:18 AM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? yes they connect to same pool and they have same setting. in both mode ( auto dif and var diff ) liq crash .but air is stable .just different in OC an intensity . i set it same but got crash. i set diff avg 1 to 30 Sec but nothing change. also set in auto diff but it's stop working. cpu use 3%-5% not more I have 1.8.0 running on minexmr with the lowest stat. diff for 10 hours on a mixed rig still without issues. When i get some time i will prepare that version with lots of debug info for me, maybe something can be fixed. tanx. i wait for it.
|
|
|
|
akvilon888
Newbie
Offline
Activity: 19
Merit: 0
|
|
March 16, 2019, 11:59:51 AM |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
Try to set it 104, 112, 118. Your card can more. 71 - is not optimal for 8Gb card. I'm use TRM cause it gives +50 h/s on one of my RX 588 cards. You can try it too. what is trm?
|
|
|
|
UnclWish
|
|
March 16, 2019, 12:43:55 PM Last edit: March 16, 2019, 01:03:33 PM by UnclWish |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
Try to set it 104, 112, 118. Your card can more. 71 - is not optimal for 8Gb card. I'm use TRM cause it gives +50 h/s on one of my RX 588 cards. You can try it too. what is trm? TeamRed miner
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 16, 2019, 04:27:06 PM |
|
hi doc. i think i find problem. it's about Page File. in time PF got bigger and bigger until rich the max size and boom... also i disable ADL and got lees HW error. it's work for few hours and didn't stop. thank for every thing. but away almost i near my rige + i have some HW programing skill and electronic and .... i happy to learn new thing .so if i can do something i will do it. thanks lot .
|
|
|
|
doktor83 (OP)
|
|
March 16, 2019, 04:39:01 PM |
|
hi doc. i think i find problem. it's about Page File. in time PF got bigger and bigger until rich the max size and boom... also i disable ADL and got lees HW error. it's work for few hours and didn't stop. thank for every thing. but away almost i near my rige + i have some HW programing skill and electronic and .... i happy to learn new thing .so if i can do something i will do it. thanks lot . Let's see how long it will work. I also fixed a few more bugs because you said only cn v4 is problematic so i investigated and found a few things to fix. Going to PM you when i finish this version so you can test
|
|
|
|
Rabotaet
Newbie
Offline
Activity: 15
Merit: 0
|
|
March 16, 2019, 06:58:18 PM |
|
B кaкиx eдиницax знaчeния пapaмeтpa? --maxnosharesent value(if no share is sent to the pool for x time, restarts miner. def. is 15 min)
Чтo нaпиcaть в бaтникe, чтoбы интepвaл пepeзaгpyзки cтaл paвным 60мин?
|
|
|
|
|