ShootNik
Newbie
 Offline
Activity: 6
Merit: 0
|
 |
April 22, 2016, 08:43:32 AM |
|
Waiting linux port.... Reinstall OS on all rigs for use miner)) LOL?  Claymore ignore all linux comments in thread - apparently we will not see linux ver, but why just do not write about that... |
|
|
|
|
|
|
|
|
|
|
|
|
|
According to NIST and ECRYPT II, the cryptographic algorithms used in
Bitcoin are expected to be strong until at least 2030. (After that, it
will not be too difficult to transition to different algorithms.)
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
merc84
|
|
April 22, 2016, 08:53:42 AM |
|
I tried to use -wd 1, but can't make it to close the miner tried -r -1 tried -r 0 When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner  My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart. . +1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now +1 same here windows totally freezes and crash sometime i have no unplug it to restart  When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally. In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs. Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed. With 3.2 and -wd 0 and -r -1 , i found again my rig rebooted and freezed on boot screen , there was no such problems with the old versions of the miner . I have the same problem. Maybe you can underclock a bit? The newer version is faster, so stress the GPU more. Try reduce intensity, also may help to put a timeout in batfile to allow windows sufficient time to load. |
|
|
|
|
Facinat
Newbie
Offline
Activity: 64
Merit: 0
|
|
April 22, 2016, 09:11:53 AM |
|
I tried to use -wd 1, but can't make it to close the miner tried -r -1 tried -r 0 When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart. . +1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now +1 same here windows totally freezes and crash sometime i have no unplug it to restart When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally. In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs. Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed. With 3.2 and -wd 0 and -r -1 , i found again my rig rebooted and freezed on boot screen , there was no such problems with the old versions of the miner . I have the same problem. Maybe you can underclock a bit? The newer version is faster, so stress the GPU more. Try reduce intensity, also may help to put a timeout in batfile to allow windows sufficient time to load. What intensity would you recommend for the -ethi? What is teh range of the intnensity? 0-16 or higher? |
|
|
|
|
|
merc84
|
|
April 22, 2016, 09:19:55 AM
Last edit: April 22, 2016, 09:34:44 AM by merc84 |
|
Sorry idk intensity range it should be either in the readme or OP, also its a good idea to set a timeout in the bat to give windows time to load fully. For example as first line in your batfile
timeout /t 30
this will make the batfile wait 30 secs to execute.
Edit: Default is 16 so set it lower if using timeout doesnt fix problem.
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 22, 2016, 09:56:52 AM |
|
Yes it is a good idea to set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system. Note "-ethi 4" can reduce mining speed a bit.
Added to OP.
|
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
April 22, 2016, 10:19:36 AM
Last edit: April 22, 2016, 03:47:11 PM by qqqq |
|
Claymore how things are going with stratum implementation for solo ver? Maybe you could do both versions simultaneously?
|
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
April 22, 2016, 10:31:19 AM |
|
Sorry idk intensity range it should be either in the readme or OP, also its a good idea to set a timeout in the bat to give windows time to load fully. For example as first line in your batfile
timeout /t 30
this will make the batfile wait 30 secs to execute.
Edit: Default is 16 so set it lower if using timeout doesnt fix problem.
ping 127.0.0.1 -n 30 Works OOB on all Windows versions since 95  |
|
|
|
|
thesaltonsea
Newbie
Offline
Activity: 64
Merit: 0
|
|
April 22, 2016, 10:59:07 AM |
|
Yes it is a good idea to set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system. Note "-ethi 4" can reduce mining speed a bit.
Added to OP.
I will test with ethi 4, but i got other idea - every night at 4 my routers restarts (thats how my network works) , and there is no connection for 2-3minutes. It was ok with the old versions of the miner, it was continue to mine when the network is back ... Maybe in 3.0 some timers kickout or something and restarts my pc ? (I dont use any bat files for autostart mining on windows boot or to restart) |
|
|
|
|
|
CorePrime95
|
|
April 22, 2016, 11:55:56 AM |
|
ping 127.0.0.1 -n 30 Works OOB on all Windows versions since 95 That is a good tip, since the timeout conmand does not exist in older Windows versions. Ive noticed that my desktop is laggy when using two cards (both AMD), however with a single card it works fine. |
|
|
|
|
Beoga
Legendary
Offline
Activity: 2646
Merit: 1141
|
|
April 22, 2016, 12:15:51 PM |
|
Will this miner work with Windows 8 (not 8.1)?
There is no 15.12 Drivers for Win 8.
|
|
|
|
|
kanoptx
Sr. Member
Offline
Activity: 406
Merit: 250
www.cryptocompare.com
|
|
April 22, 2016, 12:23:21 PM |
|
|
|
|
|
Gigadroid
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 22, 2016, 12:53:05 PM |
|
Thank you, this worked for me! So can we update our drivers to 16.4.1, paste the DLL files in our miner directory and still get a normal hashrate? |
|
|
|
|
|
ldw-com
|
|
April 22, 2016, 01:18:13 PM |
|
Thank you, this worked for me! So can we update our drivers to 16.4.1, paste the DLL files in our miner directory and still get a normal hashrate? I upgraded to 16.4.1 without pasting DLL files and still getting, no getting even better hashrates than before.... |
|
|
|
|
alpsea
Copper Member
Hero Member
Offline
Activity: 1274
Merit: 555
https://refpa28543.top/L?tag=d_286347m_1264c_&site
|
|
April 22, 2016, 01:39:17 PM |
|
Ver 3.2 / 3x R7 370 FULL OC / driver 15.12
-eth 41mh/s
-dcr 610mh/s
—————•—————
Coinotron: max 46mh eth
Supernova: max 1.2gh dcr
it's great !
|
|
|
|
|
merc84
|
|
April 22, 2016, 01:58:40 PM |
|
Thank you, this worked for me! So can we update our drivers to 16.4.1, paste the DLL files in our miner directory and still get a normal hashrate? You can update or downgrade use what ever driver u want if you have the dll's in your miner dir, the miner will use those dll's before searching for installed ones. |
|
|
|
|
|
merc84
|
|
April 22, 2016, 02:10:16 PM |
|
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238 Here i have used 15.12 as an example but u get the idea  |
|
|
|
|
avirdoz
Legendary
Offline
Activity: 1191
Merit: 1001
|
|
April 22, 2016, 02:18:20 PM |
|
I have got best results on suprnova.cc pool.
|
|
|
|
|
kanoptx
Sr. Member
Offline
Activity: 406
Merit: 250
www.cryptocompare.com
|
|
April 22, 2016, 02:20:33 PM |
|
the new version boosted my hashrate and fixed the "swings" on the pool. i would advice everyone to download the new version!  Once again, thx claymore! |
|
|
|
totikk
Newbie
Offline
Activity: 73
Merit: 0
|
|
April 22, 2016, 02:21:11 PM |
|
Good afternoon.
Firstly thanks for the miner. It's great!
Secondly, I want to ask for help / clarification. I know it's probably not a good topic for that, but I see people here experienced.
Question about Dekred mining.
In priogram I see constant speed DCR (550MH) but the site show me jumps from 300 to 600 ... (Not onle this miner, in all that I use. T try on coinmine and suprnova.)
And I am very confusing section block progress on the site. I think it should be from 0 to 100%, and I have it often passes for 100% and get 130 ... 150, and even 420%
Accordingly, there is no reward for this time ....
If necessary, I can show a screenshot.
Sorry for mistakes, English is not my native language.
|
|
|
|
|
kanoptx
Sr. Member
Offline
Activity: 406
Merit: 250
www.cryptocompare.com
|
|
April 22, 2016, 02:28:32 PM |
|
Good afternoon.
Firstly thanks for the miner. It's great!
Secondly, I want to ask for help / clarification. I know it's probably not a good topic for that, but I see people here experienced.
Question about Dekred mining.
In priogram I see constant speed DCR (550MH) but the site show me jumps from 300 to 600 ... (Not onle this miner, in all that I use. T try on coinmine and suprnova.)
And I am very confusing section block progress on the site. I think it should be from 0 to 100%, and I have it often passes for 100% and get 130 ... 150, and even 420%
Accordingly, there is no reward for this time ....
If necessary, I can show a screenshot.
Sorry for mistakes, English is not my native language.
the new version fixed that for me. install it if you havent. also, if you're not using stratum, do. |
|
|
|
|
