|
ExcelThroughKnowledge
|
 |
May 11, 2016, 06:58:32 AM |
|
What pool are you guys using for DCR? It seems like supernova is getting worse and worse - down half the time.
Suprnova is the worst functioning pool I have ever stumbled upon. And trust me, seen shitty ones before. anyone having issues with dwarfpool? suddenly all my miners stopped showing rates. I'm having 0 hash for eth and dcr but my miners are still accepting work and running. Anything wrong here?
Im having the same issue and I know there's other people too. Seems like a frontend problem... maybe ddos? It hasnt affected my work, I think. It corrects itself randomly and shows as if nothing happened. Weird and uncomfortable, if this keeps going I'll switch. I agree on that, suprnova operator is another ****** that doesn't replies to anything. I restarted all my miners and pointed them to another server connection and it appeared back at the webpage again. Wonder if the previous work done was lost or still calculated though.. =( |
|
|
|
|
|
|
|
|
|
|
|
|
Bitcoin mining is now a specialized and very risky industry, just like gold mining. Amateur miners are unlikely to make much money, and may even lose money. Bitcoin is much more than just mining, though!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
citronick
Legendary
 Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 11, 2016, 06:59:36 AM |
|
Zpool.ca and yiimp.ccminer.org is working good.
CDM v4.2 on ethpool and zpool, working great, finetune your intensity and set it/forget it Edit: best of all, payments in zpool are in BTC so no need to meddled with DCR wallets etc. |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|
osnwt
|
|
May 11, 2016, 07:25:34 AM |
|
Tried both zpool and yiimp (now with CDM 4.2). I found that share percent per block on Zpool somehow may be changed (lowered) for immature blocks while waiting. I understand the same for earnings, but for shares (shouldn't it be fixed at the time of block finding)?. So finally, dwarfpool and yiimp. I also like the latter because it pays in DCR to Bleutrade. I can exchange them when I like the rate, not when ZPool does, or use Auto-Sell feature of Bleutrade. The only question I have is why the pool software performs slow "Exchange" stage for DCR mining/DCR payment...
BTW, anybody knows how to report rig names to yiimp? I found their explanation to use "-u wallet,rigname", but adding rigname to the -ewal option did not work for me with CDM. Pool always shows "dcr" as a rig name for both my rigs. Any ideas?
|
|
|
|
|
sp_
Legendary
Offline
Activity: 2702
Merit: 1087
Team Black developer
|
|
May 11, 2016, 07:27:23 AM |
|
Use -p workername
|
|
|
|
|
osnwt
|
|
May 11, 2016, 07:33:25 AM |
|
I think that's workaround. They use password string to give some options like payment currency (if exchange is enabled). It will be shown in the "Extra" column (instead of x I use currently), yes, but it is not the rig name instead of "dcr" string:
dcr x decred 12 2.6 gh/s
|
|
|
|
|
gollumist
Newbie
Offline
Activity: 57
Merit: 0
|
|
May 11, 2016, 08:21:04 AM |
|
Have a problem with miner!
It was working fine and just close the miner and after a few minutes restart it and get message:
"Job timeout, disconnect, retry in 20 sec..."
Try those options:
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme"
file for details.
and it is the same!
Claymore - can you please Help?
Thanks
|
|
|
|
|
clipto
Member
Offline
Activity: 311
Merit: 10
|
|
May 11, 2016, 08:22:21 AM |
|
I have some requests for this excellent software.
It has a failover option, but when it connects to a pool, but can't get any hashrate it doesn't failover.
Can failover be done with failing hashrate?
This happened about 10 minutes ago:
ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port 8008
ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008)
GPU0 t=34C fan=30%, GPU1 t=36C fan=30%
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=34C fan=30%, GPU1 t=35C fan=30%
ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port 8008
ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008)
GPU0 t=34C fan=30%, GPU1 t=35C fan=30%
ETH: Job timeout, disconnect, retry in 20 sec...
Other option I would like to see is a email notification if something goes wrong.
With the normal ethminer you can set an email option while mining on dwarfpool, is that available too in the claymore's miner too?
Or is there another way to get notifications mining claymore's miner at dwarf?
Thanks in advance!
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
May 11, 2016, 08:28:58 AM |
|
1. Job timeout, disconnect, retry in 20 sec...
Dwarfpool has some problems. Not only today but for a few days already. Check dwarfpool thread.
2. With the normal ethminer you can set an email option while mining on dwarfpool
Use "-epsw YOUREMAIL".
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 11, 2016, 08:37:41 AM |
|
Tried both zpool and yiimp (now with CDM 4.2). I found that share percent per block on Zpool somehow may be changed (lowered) for immature blocks while waiting. I understand the same for earnings, but for shares (shouldn't it be fixed at the time of block finding)?. So finally, dwarfpool and yiimp. I also like the latter because it pays in DCR to Bleutrade. I can exchange them when I like the rate, not when ZPool does, or use Auto-Sell feature of Bleutrade. The only question I have is why the pool software performs slow "Exchange" stage for DCR mining/DCR payment...
BTW, anybody knows how to report rig names to yiimp? I found their explanation to use "-u wallet,rigname", but adding rigname to the -ewal option did not work for me with CDM. Pool always shows "dcr" as a rig name for both my rigs. Any ideas?
Decred block time is slow (average 5-15mn) and need 256 confirmations - payouts usually next day, in my testing of zpool and yiimp. Both are in my primary and failover DCR file in CDM42. |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
gollumist
Newbie
Offline
Activity: 57
Merit: 0
|
|
May 11, 2016, 08:38:36 AM |
|
1. Job timeout, disconnect, retry in 20 sec...
Dwarfpool has some problems. Not only today but for a few days already. Check dwarfpool thread.
2. With the normal ethminer you can set an email option while mining on dwarfpool
Use "-epsw YOUREMAIL".
Thanks for your fast response It was forking perfect on dwarfpool for last 2-3 weeks and today just disconnect and after that can not connect anymore .... Now I see that dwarfpool page is not visible - obviously they have some problems .... will wait 2-3 hours and will try again to connect! |
|
|
|
|
revelacaogr
Legendary
Offline
Activity: 1316
Merit: 1021
2009 Alea iacta est
|
|
May 11, 2016, 08:41:10 AM |
|
What pool are you guys using for DCR? It seems like supernova is getting worse and worse - down half the time.
pool.mn set/forget |
|
|
|
|
|
osnwt
|
|
May 11, 2016, 08:51:46 AM |
|
The only question I have is why the pool software performs slow "Exchange" stage for DCR mining/DCR payment... Decred block time is slow (average 5-15mn) and need 256 confirmations - payouts usually next day, in my testing of zpool and yiimp. Both are in my primary and failover DCR file in CDM42. Correct answer to another question :-) Found DCR blocks go through few stages: - Immature (lasts up to 24 hours): network confirmations - Exchange (lasts 1-3 hours): exchange DCR to BTC (say, on ZPool) - Clearead (instant): earnings transferred to the balance. You meant the "Immature" stage that is slow. I talked about "Exchange" stage. It is obvious when I mine DCR and get paid in BTC. But when both currencies are the same (DCR), what is Exchange stage for? |
|
|
|
|
|
Tinua
|
|
May 11, 2016, 09:57:02 AM |
|
FAILOVER
Use "epools.txt" and "dpools.txt" files to specify additional pools. These files have text format, one pool per line. Every pool has 3 connection attempts.
If the first character of a line is ";" or "#", this line will be ignored.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the pools list is main pool. Hi, Is it possible to change this 30 minutes for Failover? |
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 11, 2016, 10:04:21 AM |
|
The only question I have is why the pool software performs slow "Exchange" stage for DCR mining/DCR payment... Decred block time is slow (average 5-15mn) and need 256 confirmations - payouts usually next day, in my testing of zpool and yiimp. Both are in my primary and failover DCR file in CDM42. Correct answer to another question :-) Found DCR blocks go through few stages: - Immature (lasts up to 24 hours): network confirmations - Exchange (lasts 1-3 hours): exchange DCR to BTC (say, on ZPool) - Clearead (instant): earnings transferred to the balance. You meant the "Immature" stage that is slow. I talked about "Exchange" stage. It is obvious when I mine DCR and get paid in BTC. But when both currencies are the same (DCR), what is Exchange stage for? LOL... need to ask crackfoo - zpool OP to answer this.... I will ping him... I don't know why it takes long to exchange.... I only know the BTC is in my wallet the next day  |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|
Termie
|
|
May 11, 2016, 10:17:31 AM |
|
please add a hotkey to switch pool completely, incl. a second epool list for this second pool. Would be helpful if one pool fails completely, as right now #*&$§@ Dwarfpool.  |
|
|
|
|
|
Tinua
|
|
May 11, 2016, 11:02:46 AM |
|
Why DCR hashing fail, if ETH-Pool is down?
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
May 11, 2016, 11:20:22 AM |
|
Why DCR hashing fail, if ETH-Pool is down?
Because it is senseless not to mine Ethereum if you use this miner. This is Ethereum miner and plus Decred optionally, not vice versa. Just use failover to change eth pool. |
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
May 11, 2016, 11:21:54 AM |
|
FAILOVER
Use "epools.txt" and "dpools.txt" files to specify additional pools. These files have text format, one pool per line. Every pool has 3 connection attempts.
If the first character of a line is ";" or "#", this line will be ignored.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the pools list is main pool. Hi, Is it possible to change this 30 minutes for Failover? I will add an appropriate option in next update, it will allow you to change this time or cancel main pool at all. |
|
|
|
|
Tinua
|
|
May 11, 2016, 11:25:31 AM |
|
FAILOVER
Use "epools.txt" and "dpools.txt" files to specify additional pools. These files have text format, one pool per line. Every pool has 3 connection attempts.
If the first character of a line is ";" or "#", this line will be ignored.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the pools list is main pool. Hi, Is it possible to change this 30 minutes for Failover? I will add an appropriate option in next update, it will allow you to change this time or cancel main pool at all. Great news! |
|
|
|
|
spiete
Member
Offline
Activity: 98
Merit: 10
|
|
May 11, 2016, 11:37:27 AM
Last edit: May 11, 2016, 01:48:27 PM by spiete |
|
I have 1x 380x and 2x 370
mining Dwarf
with this settings
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal 0xA0F5578094e713c58B901eC43FB58bbbD7A63372 -epsw x -eworker dw1
Got
52.3 M/hs
What can i do to improve that result?
Maybe some settings?
|
|
|
|
|
|
