Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Diuscom]

http://sia.nanopool.org/

Not work eth+sia mode:

SIA: incorrect job data size
SIAD invalid http response, wrong number of bytes received: 36
Response: {"message":"404 - Refer to API.md"}

[navydude]

Best to do both, but yeah, I agree.

Can someone point me to some newbie instructions?  I have 8x 380s and in Afterburner the settings are all locked.

I know there are other ways around it. I just need to be pointed in the right direction.

You should try Sapphire Trixx.

[ahsbqt]

Yeap i cannot make it works with nanopool too

[Diuscom]

http://sia.nanopool.org/

Not work eth+sia mode:

SIA: incorrect job data size
SIAD invalid http response, wrong number of bytes received: 36
Response: {"message":"404 - Refer to API.md"}

WORK!!!!

 ...........
-dpool http://sia-eu1.nanopool.org:9980/miner/header?address=3be0304dee313515cf401b8593a0c1df905ed13f0adaee89a8d7337d2ba8209e5ca9f297bbc2
-dcoin sia
............

[slimdim]

Yeap i cannot make it works with nanopool too

try -

-dpool http://sia-eu1.nanopool.org:9980/miner/header?address=adress_sia
-dcoin sia

[fittsy]

http://sia.nanopool.org/

Not work eth+sia mode:

SIA: incorrect job data size
SIAD invalid http response, wrong number of bytes received: 36
Response: {"message":"404 - Refer to API.md"}

WORK!!!!

 ...........
-dpool http://sia-eu1.nanopool.org:9980/miner/header?address=3be0304dee313515cf401b8593a0c1df905ed13f0adaee89a8d7337d2ba8209e5ca9f297bbc2
-dcoin sia
............

Thanks. I got it to work with exp/sia as well using the commands above.

[Claymore]

If you want to specify worker on nanopool:

-dpool http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress&worker=YourWorkerName -dcoin sia

[fredeq]

On most of AMD cards downclocking/unedrvolting is disable

Not true. Every card can be downvolted and downclocked vie software except Gigabyte (downvolt).

Agreed in general.
The one I cant downvolt is 280x rev2.
I have 2x380(Gigabyte) and they can be easily downcloaked and downvolted via Trixx.

[fittsy]

Anyone else having a problem with remote monitoring of rigs once you convert them to version 5?

Monitoring my local rig that I run the remote monitoring is on, works fine.  But my other rigs show as offline in remote monitoring, even though I'm watching a screen where they are working fine.

[fraggyb]

If you want to specify worker on nanopool:

-dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=YourSiaAddress&worker=YourWorkerName" -dcoin sia

Ah, thank you.  I was trying to work out how to get my workername to show, I didn't include "" 

[madmartyk]

Can you put the SIA info in the config file?

[Leveret]

Hello, Claymore. You are a genius, and we are your russian-language support  .

Russian thread: https://forum.bits.media/index.php?/topic/22987-dual-mainer-s-odnovremennym-mainingom-dcr-eth/

ReadMe in Russian: https://forum.bits.media/index.php?/blog/256/entry-465-ofitcialnaia-instruktciia-na-russkom-iazyke-versi/


We have a question. Why do we need 16GB of Virtual Memory? Can you expand?

Can you put the SIA info in the config file?

... and into dpools.txt  , please.

[BitJunkie223]

Jesus, how do you guys keep up with all these cryptocurrencies..?  

How exactly do I mine siacoin other than solo? It's very cool and I'd obviously love to get in on it. Is there a pool I can get on? The site says there is no pool as of yet, but you guys are talking about private pools? Also, I'm kind of curious about your guys' speed on Eth+Decred and also Eth+Sia.

My XFX 285 is doing 17.3 MH/s Eth and 260 Mh/s Decred. My Asus R9 270's are doing about 12 Mh/s Eth and 180 Mh/s Decred

As far as I keep reading, those speeds are quite low. Clock for those cards (all 3) are 1050/1450, so not massively overclocked. But for being overclocked, those speeds seem pretty low. I'm on 14.9 WHQL drivers, but I was havign trouble with 15.12, so would it be useful to try using the newest drivers? How have they affected your hashrates?  

[_javi_]

what is the added power consumption for dual mining SIA? 10%.. 20%...? i'm afraid to test an already loaded home installation with eth only miners.

[navydude]

Is anyone showing a balance on nano pool for SIA?

[navydude]

what is the added power consumption for dual mining SIA? 10%.. 20%...? i'm afraid to test an already loaded home installation with eth only miners.

Im not sure what added load is but i just installed 240v to all 8 of my rigs. using 4 double pole 20 amp breakers at about half load. I would be at 80 amps or more on my home system if i was using 120v. Wouldnt work well with all appliances and ac running. You should think about it. Cost about 150 bucks for all material.

[RedRockMining]

If you want to specify worker on nanopool:

-dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=YourSiaAddress&worker=YourWorkerName" -dcoin sia

Testing this and getting:

C:\Claymore_Miner>EthDcrMiner64.exe -dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=012c6b5859ea72694f4f48c5e6c3b5c46db73da9d1dda9cfd8a0ddc11bb4c27def3faec2c656&worker=RedRockMining" -dcoin sia

╔════════════════════════════════════════════════════════════════╗
║      Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.0 Beta      ║
╚════════════════════════════════════════════════════════════════╝

ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.

I get the same -epool error even with the dual ETH/SIA config at the beginning of this thread that includes -epool.

What am I missing?

I am currently using driver version 15.3...

[fittsy]

Testing this and getting:

C:\Claymore_Miner>EthDcrMiner64.exe -dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=012c6b5859ea72694f4f48c5e6c3b5c46db73da9d1dda9cfd8a0ddc11bb4c27def3faec2c656&worker=RedRockMining" -dcoin sia

╔════════════════════════════════════════════════════════════════╗
║      Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.0 Beta      ║
╚════════════════════════════════════════════════════════════════╝

ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.

I get the same -epool error even with the dual ETH/SIA config at the beginning of this thread that includes -epool.

What am I missing?

Your quotes shouldn't start in the middle of the url.  They shouldn't start at header?"address.. they should start before the "http://

[adamvp]

On most of AMD cards downclocking/unedrvolting is disable

Not true. Every card can be downvolted and downclocked vie software except Gigabyte (downvolt).

I have Gigabyte (

so I'm lost.. It happen

But now I would like to know what is impact of sia minining on: temperature, power use etc.
Thanks

[fittsy]

Is anyone showing a balance on nano pool for SIA?

According to the notes on the top of the sia.nanopool page...

Pool is in BETA Test mode.
Use it on your own risk. Payments can be delayed. Account balances can be inaccurate.
Thank you for your patience.