doktor83 (OP)
|
|
March 15, 2019, 01:31:55 PM |
|
i test new one but i have same problem .
Ok, could you please test without algo switching, and without --enablecoinforking ? We need to isolate things. In the meantime i will prepare a version with lot of debugging that could maybe help me find where/what the problem is yes . why not? i use this SRBMiner-CN.exe --config Config\config-normalv4.txt --pools pools.txt --logfile %LOGTIME% Yes this will be ok, so if it works ok without algo switching enabled then i will at least know it is something in that part Thank you
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 15, 2019, 02:26:12 PM |
|
i test new one but i have same problem .
Ok, could you please test without algo switching, and without --enablecoinforking ? We need to isolate things. In the meantime i will prepare a version with lot of debugging that could maybe help me find where/what the problem is yes . why not? i use this SRBMiner-CN.exe --config Config\config-normalv4.txt --pools pools.txt --logfile %LOGTIME% Yes this will be ok, so if it works ok without algo switching enabled then i will at least know it is something in that part Thank you its crash again. i like to do something. your welcome. [2019-03-15 17:29:57] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"05cfbae8","result":"a60639fb8eed0cbf2f1f6b9d87298ea7f45f3cce08c414c8287a8586df7b0000"}} [2019-03-15 17:29:57] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:29:57] miner_result: Pool accepted result 0x00007BDF for job[30] [151ms] [2019-03-15 17:30:01] miner_result: Sending user result to pool [2019-03-15 17:30:01] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"26c45df4","result":"ad96beb9ee50671573575b56b063b2a0b2416f2a473bad2996ccd94a0c7e0000"}} [2019-03-15 17:30:02] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:02] miner_result: Pool accepted result 0x00007E0C for job[30] [129ms] [2019-03-15 17:30:06] miner_result: Sending user result to pool [2019-03-15 17:30:06] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"414c2f3a","result":"1d5b2d598b27fad617967dc81dac99c55194637bd02bf39a08b22cd2ff0b0000"}} [2019-03-15 17:30:06] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:06] miner_result: Pool accepted result 0x00000BFF for job[30] [129ms] [2019-03-15 17:30:06] miner_result: Sending user result to pool [2019-03-15 17:30:06] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"ecc60080","result":"71e8e874cd52ee68cc2a693673991715c56896063559f13510c3c4f5964d0000"}} [2019-03-15 17:30:07] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:07] miner_result: Pool accepted result 0x00004D96 for job[30] [132ms] [2019-03-15 17:30:07] miner_result: Sending user result to pool [2019-03-15 17:30:07] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"2ade5d74","result":"0299d63485f9e9a42b4aa541c8a327344aeae2876dd19a506990f807e5660000"}} [2019-03-15 17:30:08] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:08] miner_result: Pool accepted result 0x000066E5 for job[30] [126ms] [2019-03-15 17:30:10] miner_result: Sending user result to pool [2019-03-15 17:30:10] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"8d327551","result":"0aed86218cfbe3e34379a893c22a4142865b094b47e4654dc5949ee14d600000"}} [2019-03-15 17:30:10] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:10] miner_result: Pool accepted result 0x0000604D for job[30] [125ms] [2019-03-15 17:30:12] miner_result: Sending user result to pool [2019-03-15 17:30:12] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"178505962317293","job_id":"787252585091005","nonce":"95c2a30b","result":"a424b84be79db5d9007e32382c39761e81b1493a744aed4035def840d3490000"}} [2019-03-15 17:30:12] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2019-03-15 17:30:12] miner_result: Pool accepted result 0x000049D3 for job[30] [139ms] [2019-03-15 17:30:24] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"height":1791257,"blob":"0b0bf6dfaee4059410bd9786ac1aa117b5893c4ad08f1d7933a731a2625fffbb09d6e0a3d12f7f0 0000000804ca7b734b76c4d8fe17b2c441ba9a7b63991e9b4b3c6d91ac72135a5983b7e01","job_id":"495865455132168","target":"85980000"}} [2019-03-15 17:30:24] pool_have_job: Pool sent a new job[31], block height 1791257 (ID: 495865455132168)
|
|
|
|
doktor83 (OP)
|
|
March 15, 2019, 02:35:44 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you.
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 15, 2019, 03:10:59 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not.
|
|
|
|
XSlowHand
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 15, 2019, 06:45:14 PM |
|
i test new one but i have same problem .
Ok, could you please test without algo switching, and without --enablecoinforking ? We need to isolate things. In the meantime i will prepare a version with lot of debugging that could maybe help me find where/what the problem is I have the same issue on every miner. v4 very unstable. v8 was running for weeks without issues. "Accidental"/Forced Windows updates was basically the only downtime (can we hide behind a proxy btw? do you or will you support this one day?) I have some 4xx and ALL 5xx cards and Vega Rigs (small farm). Willing to help debug in any way.
|
|
|
|
doktor83 (OP)
|
|
March 15, 2019, 07:08:37 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? I have the same issue on every miner. v4 very unstable. v8 was running for weeks without issues. "Accidental"/Forced Windows updates was basically the only downtime (can we hide behind a proxy btw? do you or will you support this one day?) I have some 4xx and ALL 5xx cards and Vega Rigs (small farm). Willing to help debug in any way.
Are you using v1.8.0 ? Also mining on minexmr.com ? Issue shows only on v4 ? About the proxy, what do you mean will i support it ? Miner doesnt check/care where you connect as long as it can contact the devfee pools
|
|
|
|
rotaryfurball
Newbie
Offline
Activity: 13
Merit: 0
|
|
March 15, 2019, 09:26:17 PM |
|
Any updates on when a reliable version will be out
|
|
|
|
AVP
Newbie
Offline
Activity: 96
Merit: 0
|
|
March 15, 2019, 10:47:36 PM |
|
This is the problem I keep having:
After reboot, display GPU or first GPU / GPU 0 will always crash after miner is started immediately as pool sends 1st job. Other GPU's are fine, but only the one connected to display, or GPU 0 has this issue and its reproducible on 2 identical rigs so I know its not a hardware issue. Then after I close the miner and start it second time, everything is fine.
Steps to reproduce: - Reboot PC - Start miner, wait till received job from pool, observe crash, hit H and GPU overclock is reset to default clock - Close miner, restart miner, works fine after that
Using RX 470s, GRAFT algo.
Anyone else having similar issue? Doc is this something that could be fixed ?
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 15, 2019, 11:10:02 PM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? yes they connect to same pool and they have same setting. in both mode ( auto dif and var diff ) liq crash .but air is stable .just different in OC an intensity . i set it same but got crash. i set diff avg 1 to 30 Sec but nothing change. also set in auto diff but it's stop working. cpu use 3%-5% not more
|
|
|
|
patmontes
Newbie
Offline
Activity: 8
Merit: 0
|
|
March 16, 2019, 01:40:29 AM |
|
Hi Dok, In which screen or log can I verify if gpureorder is working?
|
|
|
|
cobraq
Newbie
Offline
Activity: 18
Merit: 0
|
|
March 16, 2019, 04:22:36 AM |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
|
|
|
|
UnclWish
|
|
March 16, 2019, 05:50:23 AM |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
Try to set it 104, 112, 118. Your card can more. 71 - is not optimal for 8Gb card. I'm use TRM cause it gives +50 h/s on one of my RX 588 cards. You can try it too.
|
|
|
|
doktor83 (OP)
|
|
March 16, 2019, 07:41:57 AM |
|
Hi Dok, In which screen or log can I verify if gpureorder is working?
compare the busid values with the ones in overdriventool
|
|
|
|
doktor83 (OP)
|
|
March 16, 2019, 07:44:05 AM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? yes they connect to same pool and they have same setting. in both mode ( auto dif and var diff ) liq crash .but air is stable .just different in OC an intensity . i set it same but got crash. i set diff avg 1 to 30 Sec but nothing change. also set in auto diff but it's stop working. cpu use 3%-5% not more I have 1.8.0 running on minexmr with the lowest stat. diff for 10 hours on a mixed rig still without issues. When i get some time i will prepare that version with lots of debug info for me, maybe something can be fixed.
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 16, 2019, 08:25:18 AM |
|
its crash again. i like to do something. your welcome.
I will try to reproduce on one of my rigs, going to use the same pool and same difficulty as you. thank you. always when get new job its happen. i have two rige. one vega 64 air cooling xfx -10x one vega 64 liq cooling xfx -11x. air work fine .but other one not. Are they both using the same pool and same static diff ? Or if there is some difference, what is it ? If your average share time is 1 sec, can you check your cpu usage, maybe it is overloaded ? yes they connect to same pool and they have same setting. in both mode ( auto dif and var diff ) liq crash .but air is stable .just different in OC an intensity . i set it same but got crash. i set diff avg 1 to 30 Sec but nothing change. also set in auto diff but it's stop working. cpu use 3%-5% not more I have 1.8.0 running on minexmr with the lowest stat. diff for 10 hours on a mixed rig still without issues. When i get some time i will prepare that version with lots of debug info for me, maybe something can be fixed. tanx. i wait for it.
|
|
|
|
akvilon888
Newbie
Offline
Activity: 19
Merit: 0
|
|
March 16, 2019, 11:59:51 AM |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
Try to set it 104, 112, 118. Your card can more. 71 - is not optimal for 8Gb card. I'm use TRM cause it gives +50 h/s on one of my RX 588 cards. You can try it too. what is trm?
|
|
|
|
UnclWish
|
|
March 16, 2019, 12:43:55 PM Last edit: March 16, 2019, 01:03:33 PM by UnclWish |
|
what about intensivity for moneror for 570 8gb? default 71 its ok? 890hs
Try to set it 104, 112, 118. Your card can more. 71 - is not optimal for 8Gb card. I'm use TRM cause it gives +50 h/s on one of my RX 588 cards. You can try it too. what is trm? TeamRed miner
|
|
|
|
chimaeraa
Newbie
Offline
Activity: 49
Merit: 0
|
|
March 16, 2019, 04:27:06 PM |
|
hi doc. i think i find problem. it's about Page File. in time PF got bigger and bigger until rich the max size and boom... also i disable ADL and got lees HW error. it's work for few hours and didn't stop. thank for every thing. but away almost i near my rige + i have some HW programing skill and electronic and .... i happy to learn new thing .so if i can do something i will do it. thanks lot .
|
|
|
|
doktor83 (OP)
|
|
March 16, 2019, 04:39:01 PM |
|
hi doc. i think i find problem. it's about Page File. in time PF got bigger and bigger until rich the max size and boom... also i disable ADL and got lees HW error. it's work for few hours and didn't stop. thank for every thing. but away almost i near my rige + i have some HW programing skill and electronic and .... i happy to learn new thing .so if i can do something i will do it. thanks lot . Let's see how long it will work. I also fixed a few more bugs because you said only cn v4 is problematic so i investigated and found a few things to fix. Going to PM you when i finish this version so you can test
|
|
|
|
Rabotaet
Newbie
Offline
Activity: 15
Merit: 0
|
|
March 16, 2019, 06:58:18 PM |
|
B кaкиx eдиницax знaчeния пapaмeтpa? --maxnosharesent value(if no share is sent to the pool for x time, restarts miner. def. is 15 min)
Чтo нaпиcaть в бaтникe, чтoбы интepвaл пepeзaгpyзки cтaл paвным 60мин?
|
|
|
|
|