Pustul
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 07:08:27 PM |
|
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238 Here i have used 15.12 as an example but u get the idea ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst. Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit? 23mh/s is possible with 7970. But be prepared to overclock it to 1100/1700MHz With which miner settings ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much. Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings. Here is my miner settings, with Cat 16.3.2 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1 I use intensity of 4 on my display card so as not to make my PC unusable ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc. Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast?
|
|
|
|
dominuspro
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 07:13:57 PM |
|
finally it runs with coinotron. But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip" what does this mean?
Please, post here bat file to Coinotrone I just switched back to... I was there before Claymore came with this great miner ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) my bat: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool coinotron.com:3344 -ewal user.rig -esm 2 -epsw password -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.rig -dpsw password -dcri 45 -allpools 1 -cclock 1165 pause change user.rig and password Take care also on the -dcri and -cclock to suit your needs ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
melloyellow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 07:19:18 PM |
|
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be. I should get the payment each day a bit earlier but those are the facts: Thu Apr 21 2016 14:52:58 GMT+0200 (CEST) Wed Apr 20 2016 12:47:05 GMT+0200 (CEST) Tue Apr 19 2016 09:42:50 GMT+0200 (CEST) Mon Apr 18 2016 07:51:57 GMT+0200 (CEST I know those are the pools... But no way of going solo below 500Mh. I have about 70Mh and show just below 1 ETH /Day that is what I have been getting. Which pool are you at and is that 70mh/s the calculated hashrate at the pool? According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows. For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.
|
|
|
|
Walrusbonzo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 07:20:59 PM |
|
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238 Here i have used 15.12 as an example but u get the idea ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst. Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit? 23mh/s is possible with 7970. But be prepared to overclock it to 1100/1700MHz With which miner settings ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much. Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings. Here is my miner settings, with Cat 16.3.2 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1 I use intensity of 4 on my display card so as not to make my PC unusable ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc. Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast? On my 7950 etha 1 is definitely faster, I don't think it's any different on the 7970. I'm sure claymore could explain why that would be. I applied an overclock to all three cards on the ROM, it's a safe stable overclock for gaming. But for Eth mining I use MSI Afterburner to get a bit more. The 2x7950 default clocks are 825/1250, I modified ROM with 1080/1500 and overclock to 1130/1700(This card is sandwiched between the other two and runs hot) and 1190/1700(This is the bottom card and runs much cooler than the other two) with Afterburner. These get me 23 and 23.5mh/s respectively. The 7970 I think had 1040/1400, I modified ROM with 1080/1500 and use afterburner to overclock to 1100/1700. When it wasn't the display card and in a cooler PC it would do 1240 on the core! But as the display card in my main PC, what I'm using to type this, it artifacts at 1140 on the core.
|
|
|
|
madmartyk
Legendary
Online
Activity: 2688
Merit: 1030
Yes I am a pirate, 300 years too late!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 07:30:50 PM |
|
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be. I should get the payment each day a bit earlier but those are the facts: Thu Apr 21 2016 14:52:58 GMT+0200 (CEST) Wed Apr 20 2016 12:47:05 GMT+0200 (CEST) Tue Apr 19 2016 09:42:50 GMT+0200 (CEST) Mon Apr 18 2016 07:51:57 GMT+0200 (CEST I know those are the pools... But no way of going solo below 500Mh. I have about 70Mh and show just below 1 ETH /Day that is what I have been getting. Which pool are you at and is that 70mh/s the calculated hashrate at the pool? According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows. For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth. I have had my miners down to update the software. Reported Hashrate: 70.4 MH/s Note: This is the hashrate as reported by your miner to the pool. Effective Current Hashrate: 72.2 MH/s Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal. Effective Average Hashrate (last 24h): 68.1 MH/s Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window.
|
|
|
|
spiete
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 07:54:29 PM Last edit: June 02, 2016, 05:49:47 PM by spiete |
|
x1 380x and x2 370
Got this settings
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal 0xA0F5578094e713c58B901eC43FB58bbbD7A63372 -epsw x -eworker dw1
What does incorrect share means?
I didnt overclocked my GPUs.
Also 46 seconds for one round is okay? Or what 46 seconds mean?
And how do i check shares for last hour? Not for every time.
With genoil it has 0.2 (--farm-recheck 100) second for round.
Also did my config is set right? Or there is something that i can modify?
And do i need to run geth? Or dwarf proxy?
Thanks!
Update###
Is this okay that i got 1 rejected share after 5 minutes?
|
|
|
|
melloyellow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 08:18:44 PM |
|
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be. I should get the payment each day a bit earlier but those are the facts: Thu Apr 21 2016 14:52:58 GMT+0200 (CEST) Wed Apr 20 2016 12:47:05 GMT+0200 (CEST) Tue Apr 19 2016 09:42:50 GMT+0200 (CEST) Mon Apr 18 2016 07:51:57 GMT+0200 (CEST I know those are the pools... But no way of going solo below 500Mh. I have about 70Mh and show just below 1 ETH /Day that is what I have been getting. Which pool are you at and is that 70mh/s the calculated hashrate at the pool? According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows. For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth. I have had my miners down to update the software. Reported Hashrate: 70.4 MH/s Note: This is the hashrate as reported by your miner to the pool. Effective Current Hashrate: 72.2 MH/s Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal. Effective Average Hashrate (last 24h): 68.1 MH/s Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window. Thanks. So you and dominuspro are both at ethermine. I wish these pools would show rejects....maybe that's what is going on with dominuspro.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 08:23:23 PM |
|
I tried these settings with the setting for coinotron but I get this
15:14:16:804 1570 Need to check DAG file (epoch #46), starting...
15:14:16:945 914 got 101 bytes 15:14:16:945 914 buf: {"error": null, "id": 2, "result": true} { "id": 9876, "method": "client.get_version", "params": []}
15:14:16:945 914 parse packet: 36 15:14:16:945 914 ETH: Authorized 15:14:16:945 914 remove first packet 54 15:14:16:945 914 new buf size: 54 15:14:16:945 914 parse packet: 54 15:14:16:945 914 send: {"error": null, "jsonrpc": "id": 9876, "result": "eth 1.0"}
15:14:16:945 914 new buf size: 0 15:14:17:148 914 got 66 bytes 15:14:17:148 914 buf: {"id": , "result": null, "error": [51, "JSON parse error", null]}
15:14:17:148 914 parse packet: 57 15:14:17:148 914 Cannot parse JSON! 15:14:17:148 914 new buf size: 0 15:14:19:165 660 OC v5, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst 15:14:22:170 660 OC v5, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
It's a minor bug, will be fixed in next update: miner sends incorrect version answer, then pool sends incorrect report about the error, therefore you see this warning. You still can mine, here is my command line that you can use as start point, very similar to sample from OP: EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1
|
|
|
|
madmartyk
Legendary
Online
Activity: 2688
Merit: 1030
Yes I am a pirate, 300 years too late!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 08:32:01 PM |
|
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be. I should get the payment each day a bit earlier but those are the facts: Thu Apr 21 2016 14:52:58 GMT+0200 (CEST) Wed Apr 20 2016 12:47:05 GMT+0200 (CEST) Tue Apr 19 2016 09:42:50 GMT+0200 (CEST) Mon Apr 18 2016 07:51:57 GMT+0200 (CEST I know those are the pools... But no way of going solo below 500Mh. I have about 70Mh and show just below 1 ETH /Day that is what I have been getting. Which pool are you at and is that 70mh/s the calculated hashrate at the pool? According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows. For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth. I have had my miners down to update the software. Reported Hashrate: 70.4 MH/s Note: This is the hashrate as reported by your miner to the pool. Effective Current Hashrate: 72.2 MH/s Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal. Effective Average Hashrate (last 24h): 68.1 MH/s Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window. Thanks. So you and dominuspro are both at ethermine. I wish these pools would show rejects....maybe that's what is going on with dominuspro. I can see the rejects on the miners, very few. Since loading the new version the 290x has 634 shares and 0 rejects, and the 280x's have 876 shares and 0 rejects
|
|
|
|
Pustul
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 08:47:49 PM |
|
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238 Here i have used 15.12 as an example but u get the idea ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst. Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit? 23mh/s is possible with 7970. But be prepared to overclock it to 1100/1700MHz With which miner settings ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much. Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings. Here is my miner settings, with Cat 16.3.2 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1 I use intensity of 4 on my display card so as not to make my PC unusable ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc. Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast? On my 7950 etha 1 is definitely faster, I don't think it's any different on the 7970. I'm sure claymore could explain why that would be. I applied an overclock to all three cards on the ROM, it's a safe stable overclock for gaming. But for Eth mining I use MSI Afterburner to get a bit more. The 2x7950 default clocks are 825/1250, I modified ROM with 1080/1500 and overclock to 1130/1700(This card is sandwiched between the other two and runs hot) and 1190/1700(This is the bottom card and runs much cooler than the other two) with Afterburner. These get me 23 and 23.5mh/s respectively. The 7970 I think had 1040/1400, I modified ROM with 1080/1500 and use afterburner to overclock to 1100/1700. When it wasn't the display card and in a cooler PC it would do 1240 on the core! But as the display card in my main PC, what I'm using to type this, it artifacts at 1140 on the core. Thank you for all the details! Haha I remember when I had the 7970 and 2x 290s in my mid tower, it was tight ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Led me to build a rig and add 2 more 290s and replace the three gpus in the tower by 270s to lower the heat. Anyway I ended up selling everything but the 7970 when altcoin mining became so unprofitable in 2014. Back to eth mining ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I reinstalled the drivers after a nice cleanup and now the oc is working fine, I think my clocks were stuck before, that's why I didn't saw the difference. 1240 is really nice! I never was able to go beyond 1200 ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) It seems 1650 memory is the max for my card. I've got 21.6 MH/s with 1150/1650, it's a nice improvement compared to stock! Oh and -etha 0 is definitively better for me, but maybe that's the reason you can oc more and in the end get a better hashrate.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 09:01:56 PM |
|
Again, it is minor bug and you can mine. Start miner and wait.
|
|
|
|
dannygroove
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 09:06:36 PM Last edit: April 22, 2016, 10:27:53 PM by dannygroove |
|
Still getting around 10% rejection on DCR/Suprnova. Don't know if its miner's fault or Suprnova's. Can someone recommend a good DCR pool?
Problem solved as soon as I made the switch to Stratum.
|
|
|
|
revelacaogr
Legendary
Offline
Activity: 1316
Merit: 1021
2009 Alea iacta est
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 09:28:57 PM |
|
maxminers
|
|
|
|
|
revelacaogr
Legendary
Offline
Activity: 1316
Merit: 1021
2009 Alea iacta est
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 09:38:57 PM |
|
Again, it is minor bug and you can mine. Start miner and wait.
it crashes i guess it should be because i am using 15.11.1 I have to download 15.12 dont change the driver use only the opencl.dlls from 15.12 end put it in the miners file...
|
|
|
|
revelacaogr
Legendary
Offline
Activity: 1316
Merit: 1021
2009 Alea iacta est
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 09:39:58 PM |
|
sorry pool.mn have auto vardiff and not maxminers i prever pool.mn 1-1.5% rejects
|
|
|
|
Lucky - Luciano
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 09:56:32 PM |
|
sorry pool.mn have auto vardiff and not maxminers i prever pool.mn 1-1.5% rejects Ok. Thank you. I'll try the pool "pool.mn" tomorrow. The "dcr.maxminers.net" I earned only about 0.3 DCR for half a day with about 2000 Mh / s
|
|
|
|
|
phzi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 10:06:22 PM |
|
For anyone interested, I am having best results/profitability on my R9 290 rigs with: - AMD 15.7.1 Driver (only _extract_ installer package [do not install], load drivers thru Device Manager) - allows downclocking and results in the least GPU usage dips. - Copy amdocl64.dll from AMD 15.12 to miner folder - brings up hashrate _very_ slightly - Stilt's mining BIOS for 290 - lower power usage and slightly higher hashrate - Downclock memory to 1125 (lower timing strap, results in the same performance as 1250 with lower power consumption) - Overclock core as far as is stable (I use 1080mhz now; used to use 1100, but with increasing ambient temperatures have pulled back to 1080 for stability) - decred intensity at 33 (lose ~300Kh/s Ethash in return for 50MH/s decred)
With version 3.2, I am getting ~0.5% DCR rejects, and essentially 0% Eth rejects. 31MH/s on Ethash and 500MH/s Decred for each GPU. Ethereum pool effective hash is ~3% below reported (makes sense given tiny GPU usage dips and 2% devfee).
Best part is the stability.
Keep rockin' Claymore!
--
Claymore: Can you please add the share timer to rejected shares too?
--
revelacaogr/Lucky - Luciano: pool.mn doesn't actually have vardiff, their page header is lying. Their stratum just stays at diff 1 permanently. Only site with working vardiff I've seen is coinmine, but their reject rate is pretty bad from my testing.
That said, I'm using pool.mn right now as the profitability and reject rates have been the best.
|
|
|
|
phzi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 22, 2016, 10:09:12 PM |
|
That calculator is completely wack. You should get double the Ethereum output that it suggests.
|
|
|
|
|