SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[livada]

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

[dragonmike]

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

1170W from the wall? That's pretty good... What frequencies and voltages are you using? I know I've got one card that's struggling but I have yet to find time to isolate it and test with different frequencies & voltages. Anything under Mem_P3@975mV will not initialise it.

[EscapeV3locity]

Vega FE miner performance is horrible compared to where it should be. It’s not just this miner but other miners have the same performance issue. Just wondering if the mining dev team is looking into this.

[mmex]

Could anybody please point me to a working VEAG powerplay table mods for 18.6.1 driver? My old PPT from OLDcomer's Hardware stopped working after I updated the block-chain driver to 18.6.1. Thanks.
 

[UnclWish]

Please, who have rx 580 card and 18.6.1 driver, launch SRB with worksize 8 and share with me file g2_CNV8_w8_k1.srb from cache folder inside miner folder.

I'll give you something better but for worksize 16 / intensity 58. Not compiled with any recomended driver.
https://www107.zippyshare.com/v/goLUMrVU/file.html
rx570/580

Thanks! I'll try it! But can you make same file with 8 worksize?

https://www46.zippyshare.com/v/dpFsfPAA/file.html

Great thanks to you! This is real what I was searching! Speed on worksize 8 is almost the same as on v7 - only a bit less!

[doktor83]

Vega FE miner performance is horrible compared to where it should be. It’s not just this miner but other miners have the same performance issue. Just wondering if the mining dev team is looking into this.

The problem is i don't have a FE, so i can't really do anything

[AVP]

Greetings - using --startupscript to overclock / undervolt GPUs.

However when Algo switches some aglo's require different clock / voltage settings.

How can I use different --startupscript for each Algo?

[N2DCRYPT]

Vega FE miner performance is horrible compared to where it should be. It’s not just this miner but other miners have the same performance issue. Just wondering if the mining dev team is looking into this.

The problem is i don't have a FE, so i can't really do anything

Not your fault Dok, it's not the miner, it's more a driver thing. Thanks for your patience, I'm sure the complaints get old after a while.
And double thanks for your continued development on what I believe is the best cryptonight miner around!

To those w/ FEs:

driver: win10-64bit-radeon-pro-software-enterprise-18.q3.1-oct1

But a couple of tricks you have to use to pull it off:

1. go into global settings and turn off HBCC memory.
2. if using SRBMiner, you have to have --enableduplicategpuid in the bat file, and then double up the threads in the config file for V8. I'm using 124 for intensity and 16 for worksize.

FE still the king, hashing V8 @ ~2125 H/s

one other thing: use the precompiled kernel that comes with SRBMiner, do not compile the kernel with the new drivers.

[Lunga Chung]

you did no bios mod?

yes, custom made bios. But i just test with SRB Polaris - Pimp my straps i get similar results

[tvukoman]

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

same here. Try 112/16/2, and Core to 1408, works for me... but maybe it is power related...

[doktor83]

Greetings - using --startupscript to overclock / undervolt GPUs.

However when Algo switches some aglo's require different clock / voltage settings.

How can I use different --startupscript for each Algo?

Have you tried with the "startup_script" in algos.txt ?

[livada]

what is this?

https://image.prntscr.com/image/-hx_HgYBTx_z0rDnbLCYLw.jpg
DATA IS LARGER THAN BUFFER ?
all work last 60 day without any error and now send this

rig go on next pool and again send this.

i try other rig other internet location and send again.

try 1.8.6. 1.8.4

any idea?

[livada]

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

1170W from the wall? That's pretty good... What frequencies and voltages are you using? I know I've got one card that's struggling but I have yet to find time to isolate it and test with different frequencies & voltages. Anything under Mem_P3@975mV will not initialise it.

6*vega56 nitro+ (hynix) - GPU: 1498/900mv MEM: 929/936/958mhz -900mv (3 card work with 958mhz - 2card 936mhz 1 card 929mhz -all use 900mv

V7 970W(11650HR) - V8 1270W(11120HR) - FAST 1020W(22600HR) - Heavy 940W(9110HR) - TUBE 960W(9380HR)

[Bael]

Hi

I'm trying to use the SSL/TSL connection in nanopool and it does not work.

I added this line in the file pools.txt "pool_use_tls": true and I have put port 14433

But it never works for me.

Do you know what the problem could be?

Greetings guys!

[ripcurrent]

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

1170W from the wall? That's pretty good... What frequencies and voltages are you using? I know I've got one card that's struggling but I have yet to find time to isolate it and test with different frequencies & voltages. Anything under Mem_P3@975mV will not initialise it.

6*vega56 nitro+ (hynix) - GPU: 1498/900mv MEM: 929/936/958mhz -900mv (3 card work with 958mhz - 2card 936mhz 1 card 929mhz -all use 900mv

V7 970W(11650HR) - V8 1270W(11120HR) - FAST 1020W(22600HR) - Heavy 940W(9110HR) - TUBE 960W(9380HR)

what does your full system pull from the wall ? with V8 not just the cards

[Kgonla]

What is the worksize supposed to do?

I tested with one RX 580 4GB from W1 to W64 & the H/s is exactly the same not even 1 H/s up or down.

[Liam_Howlett]

doktor83

How to write "max_difficulty" if all parameters are in bat ?

SRBMiner-CN.exe --config Config\config.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 26,26,26,26,26 --cgputhreads 2,2,2,2,2 --cgpuworksize 32,32,32,32,32 --cpool pool.supportxmr.com:7777 --cwallet "wallet" --cpassword x

[jazz1984]

Anyone with AMD R9 380 cards?

I was getting 600hash with v7 now 485hash only.
Any better results?

What it is your overclock settings? config.txt?
You can try { "id" : 0, "intensity" : 60, "worksize" : 16, "threads" : 1}
or { "id" : 0, "intensity" : 30, "worksize" : 16, "threads" : 2}
then gradually increase or decrease intencity, finding best hashrate.
Here discussing tahiti hashrates, may be you can find some useful info: https://bitcointalk.org/index.php?topic=3167363.msg47101597#msg47101597

[doktor83]

doktor83

How to write "max_difficulty" if all parameters are in bat ?

SRBMiner-CN.exe --config Config\config.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 26,26,26,26,26 --cgputhreads 2,2,2,2,2 --cgpuworksize 32,32,32,32,32 --cpool pool.supportxmr.com:7777 --cwallet "wallet" --cpassword x

"keepalive"
"job_timeout"
"max_difficulty"

Can't be set in cmd, but it's not a bad idea to implement them

[Marvell2]

Vega FE miner performance is horrible compared to where it should be. It’s not just this miner but other miners have the same performance issue. Just wondering if the mining dev team is looking into this.

The problem is i don't have a FE, so i can't really do anything

Not your fault Dok, it's not the miner, it's more a driver thing. Thanks for your patience, I'm sure the complaints get old after a while.
And double thanks for your continued development on what I believe is the best cryptonight miner around!

To those w/ FEs:

driver: win10-64bit-radeon-pro-software-enterprise-18.q3.1-oct1

But a couple of tricks you have to use to pull it off:

1. go into global settings and turn off HBCC memory.
2. if using SRBMiner, you have to have --enableduplicategpuid in the bat file, and then double up the threads in the config file for V8. I'm using 124 for intensity and 16 for worksize.

FE still the king, hashing V8 @ ~2125 H/s

one other thing: use the precompiled kernel that comes with SRBMiner, do not compile the kernel with the new drivers.

i use the tool to turn hbcc off thats not my issue, I am using the 18.5.2 drivers(may) though
what does enableduicategpuid do , can you post your full batch file fir FEs and your config setting?

also how do you force the use of precmplied kernels, Srb always compiles kernels on startup

thanks