SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[smallbridge]

So I have both my vegas running at optimal speed but my 570s x 6 are all running at 830 @ i64 @w8 @t1 this is the best I can get for some reason.. t2 make the hs about 600?

Anyone got anythoughts? I've seen some with 950-1000 on these cards but mine just aren't getting there. Could my strap setting need altering?

before v8 cards were running at 1050 and 941 across the lot. mix of samsung and hynix

[MaxHa$h]

So I have both my vegas running at optimal speed but my 570s x 6 are all running at 830 @ i64 @w8 @t1 this is the best I can get for some reason.. t2 make the hs about 600?

Anyone got anythoughts? I've seen some with 950-1000 on these cards but mine just aren't getting there. Could my strap setting need altering?

before v8 cards were running at 1050 and 941 across the lot. mix of samsung and hynix

intensity 64 is too high
try 54 with 2 threads

also are these 4gb or 8gb?
are bios modded with One click or some custom online straps?
what are the over clocks? post your .ini or screen shots of overdriventool

[MagicSmoker]

I've been using xmr-stak for about a year now, but I just switched over to SRBMiner on my 4x RX 560 rig because the former program is seriously buggy when set to CNv8. Hashrate is just slightly higher than xmr-stak - 1765H/s vs. 1735H/s (not accounting for lost time due to crashes, stuck cards, etc...) - and power consumption is just slightly lower - 355W vs. 375W - but this is letting SRBMiner pick the intensity (double threads set to true). I much prefer to set intensity myself, however, so if anyone cares to share their settings for the 2GB RX 560 I'd appreciate it.

FYI, I had to downgrade from Adrenalin 18.6.1 to 18.5.1 to get SRBMiner to work; prior to that the driver would crash hard - blue screen reboot hard - as soon as it reported it had logged into the pool (so, presumably, as soon as it tried to generate the first share). I have no idea why 18.5.1 works when 18.6.1 didn't, but that's computers for you.

[twotwosix]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

[Bwonsamdi]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

[MaxHa$h]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

also, Not sure its every been explained specifically, but opening certain software after the drop usually brings them back up (gpuz and cycling through the cards, or reapplying overclocks through a .bat file for OverdriveNTool, HWinfo64) something about having the cards re-initialized(probably not the right term) gets them back up and keeps them up. If updating to 18.6.1 works then thats the better bet. I havent been on cnHeavy for a few months.

[twotwosix]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

also, Not sure its every been explained specifically, but opening certain software after the drop usually brings them back up (gpuz and cycling through the cards, or reapplying overclocks through a .bat file for OverdriveNTool, HWinfo64) something about having the cards re-initialized(probably not the right term) gets them back up and keeps them up. If updating to 18.6.1 works then thats the better bet. I havent been on cnHeavy for a few months.

Used 18.6.1,  18.5.1 and 18.5.2,  all same results.

Every restart, different results.

[smallbridge]

cards have bios strap mod, installing 18.6 now. 18.5 was installed

all cards are 4gb

cheers

[UnclWish]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

also, Not sure its every been explained specifically, but opening certain software after the drop usually brings them back up (gpuz and cycling through the cards, or reapplying overclocks through a .bat file for OverdriveNTool, HWinfo64) something about having the cards re-initialized(probably not the right term) gets them back up and keeps them up. If updating to 18.6.1 works then thats the better bet. I havent been on cnHeavy for a few months.

Used 18.6.1,  18.5.1 and 18.5.2,  all same results.

Every restart, different results.

Cause of bad compiled kernels or wrong intensity parameters. Place good kernels in cache folder and set right intensity - you will get good results.

[jerichon333]

I tried a couple of pools and the payment is 20-30% less than the 2 calculators show (whattomine and https://monerotools.github.io/calculator/). I am yet to try nanopool - is it better than the others?

Can Anyone answer to this question? I have this problem too, why we have less monero then what to mine write daily

[GasMan512]

Is there any good coing with good profit on cryptonight algo?

[smallbridge]

that didnt solved the problem... adding 2 thread reduces hs to 450

looking a bios flash to see if there is something wrong...

[twotwosix]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

also, Not sure its every been explained specifically, but opening certain software after the drop usually brings them back up (gpuz and cycling through the cards, or reapplying overclocks through a .bat file for OverdriveNTool, HWinfo64) something about having the cards re-initialized(probably not the right term) gets them back up and keeps them up. If updating to 18.6.1 works then thats the better bet. I havent been on cnHeavy for a few months.

Used 18.6.1,  18.5.1 and 18.5.2,  all same results.

Every restart, different results.

Cause of bad compiled kernels or wrong intensity parameters. Place good kernels in cache folder and set right intensity - you will get good results.

I deleted the kernels, used ddu uninstaller, instaled driver 18.6.1 and same problema, im crazy with this problem, Mining monero v7 berore same problem with the hash

[UnclWish]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

also, Not sure its every been explained specifically, but opening certain software after the drop usually brings them back up (gpuz and cycling through the cards, or reapplying overclocks through a .bat file for OverdriveNTool, HWinfo64) something about having the cards re-initialized(probably not the right term) gets them back up and keeps them up. If updating to 18.6.1 works then thats the better bet. I havent been on cnHeavy for a few months.

Used 18.6.1,  18.5.1 and 18.5.2,  all same results.

Every restart, different results.

Cause of bad compiled kernels or wrong intensity parameters. Place good kernels in cache folder and set right intensity - you will get good results.

I deleted the kernels, used ddu uninstaller, instaled driver 18.6.1 and same problema, im crazy with this problem, Mining monero v7 berore same problem with the hash

What intensity you're use?

[twotwosix]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

also, Not sure its every been explained specifically, but opening certain software after the drop usually brings them back up (gpuz and cycling through the cards, or reapplying overclocks through a .bat file for OverdriveNTool, HWinfo64) something about having the cards re-initialized(probably not the right term) gets them back up and keeps them up. If updating to 18.6.1 works then thats the better bet. I havent been on cnHeavy for a few months.

Used 18.6.1,  18.5.1 and 18.5.2,  all same results.

Every restart, different results.

Cause of bad compiled kernels or wrong intensity parameters. Place good kernels in cache folder and set right intensity - you will get good results.

I deleted the kernels, used ddu uninstaller, instaled driver 18.6.1 and same problema, im crazy with this problem, Mining monero v7 berore same problem with the hash

What intensity you're use?

59 is the Max, but tried less intensity, the total hashrate is random when wait 5 minuts mining

[UnclWish]

I have a Rig x8 RX 580 8gb Mining cryptonight heavy. Sometimes Mining at 960 h/s each and after restart a lot of times can reach 1100+ h/s. Why?

Hello I have some RX 570 rigs and I see Hashrate 900 h/s. Use AMD adrenaline 18.6 Driver you'll see the problem solved.

also, Not sure its every been explained specifically, but opening certain software after the drop usually brings them back up (gpuz and cycling through the cards, or reapplying overclocks through a .bat file for OverdriveNTool, HWinfo64) something about having the cards re-initialized(probably not the right term) gets them back up and keeps them up. If updating to 18.6.1 works then thats the better bet. I havent been on cnHeavy for a few months.

Used 18.6.1,  18.5.1 and 18.5.2,  all same results.

Every restart, different results.

Cause of bad compiled kernels or wrong intensity parameters. Place good kernels in cache folder and set right intensity - you will get good results.

I deleted the kernels, used ddu uninstaller, instaled driver 18.6.1 and same problema, im crazy with this problem, Mining monero v7 berore same problem with the hash

What intensity you're use?

59 is the Max, but tried less intensity, the total hashrate is random when wait 5 minuts mining

Try 59.5 and other values with decimals. 5 minutes is too small period of time to stabilize speed especcially on heavy algo. You must every try wait at least 10-15 minutes. Sometimes speed is became stable after 10-12-15 minutes. And often it became faster!

[mmex]

Please help. I have one Vega56 and one RX580-8G. Got the following error when running SRBMinber 1.6.8. Tried different drivers (18.5.1, 18.5.2, 18.6.1), DDU clean install every time. Also tried the default kernel and compiled kernel.  One wired thing I noticed is that the miner recognizes my RX580 as "Radeon RX Vega [ellesmere]". The miner is working properly only when I use one card at a time to hash with fresh compiled kernel.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
[2018-10-25 14:17:10] Miner version: 1.6.8
[2018-10-25 14:17:10] Windows version: 10.0 build 17763
[2018-10-25 14:17:10] Video driver version: 24.20.11021.1000
[2018-10-25 14:17:11] AMD Platform ID: 0
[2018-10-25 14:17:11] AMD platform FOUND
[2018-10-25 14:17:11] Found 2 AMD devices
[2018-10-25 14:17:11] CPU AES-NI: FALSE
[2018-10-25 14:17:11] GPU0: Radeon RX Vega [ellesmere] [8192 MB][Intensity 61.0][W: 16][T: 2][K: 1][BUS: 15]
[2018-10-25 14:17:11] GPU1: Radeon RX Vega [gfx900] [8176 MB][Intensity 120.0][W: 16][T: 2][K: 1][BUS: 5]
[2018-10-25 14:17:11] ADL is enabled
[2018-10-25 14:17:11] CryptonightV8 mode enabled
[2018-10-25 14:17:11] Starting init of mining threads
[2018-10-25 14:17:11] Heating up system, please wait...
[2018-10-25 14:17:11] Created OCL context
[2018-10-25 14:17:11] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-10-25 14:17:11] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-10-25 14:17:11] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-10-25 14:17:12] Loading kernel for DEVICE BUS ID 15 ...
[2018-10-25 14:17:12] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram [ctx->Program] for DeviceID 0 (Thread 0)
[2018-10-25 14:17:12] Error initing GPU's. Stopping miner process

[Ballscack]

Any news on support for posible integration CryptoNight-Webchain?

[gregv64]

I am using the "guide to reach 2k+ on v8 on vega 64"

Got 2 64s and 1 56.
The 56 is in slot 003, however upon launching the miner I get the following error:

2018-10-24 00:56:27] Loading kernel for DEVICE BUS ID 8 ...

[2018-10-24 00:56:27] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram [ctx->Program] for DeviceID 0 (Thread 0)

I got pretty familiar with XMR Stak but I have been having lots of stability issues with it so wanted to try the SRB miner. I'm sure it is a simple fix, just don't know where to start.



Any pointers are appreciated.

[qwep1]

[2018-10-26 01:00:28] GPU0 :    984 H/s [T: 53c, RPM: 2038, CC: 1452 MHz, MC: 875 MHz][BUS:14]
[2018-10-26 01:00:28] GPU1 :    1046 H/s [T: 50c, RPM: 1873, CC: 1452 MHz, MC: 875 MHz][BUS:7]
[2018-10-26 01:00:28] GPU2 :    1150 H/s [T: 54c, RPM: 1899, CC: 1452 MHz, MC: 875 MHz][BUS:3]
[2018-10-26 01:00:28] GPU3 :    1275 H/s [T: 50c, RPM: 0, CC: 1452 MHz, MC: 875 MHz][BUS:11] - vega56, why low, driver 18.6.1 "intensity" : 110, "worksize" : 16, "threads" : 2