shera037
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 28, 2018, 03:29:36 PM Last edit: December 29, 2018, 12:19:25 AM by shera037 |
|
to doctor83
Hi, pls add "worker-id" param to srbminer (otherwise statistics on a webchain pool is incorrectly displayed )
also problem with pool {"id":1,"jsonrpc":"2.0","method":"login","worker":"Rig-9","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"XMRig/2.7.3-beta (Windows NT 10.0; Win64; x64) libuv/1.23.0 msvc/2017"}}. {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.4","rigid":"id=Rig-9"}} I don't understand what you are trying to say here valid login {"id":1,"jsonrpc":"2.0","method":"login","worker":"Rig-9","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"XMRig/2.7.3-beta (Windows NT 10.0; Win64; x64) libuv/1.23.0 msvc/2017"}}. srbminer login {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.4","rigid":"id=Rig-9"}} need help to modify my pool pool code: import "encoding/json" type JSONRpcReq struct { Id json.RawMessage `json:"id"` Method string `json:"method"` Params json.RawMessage `json:"params"` } type StratumReq struct { JSONRpcReq Worker string `json:"worker"` } No need to modify pool, i can modify the json. So it needs a "worker" parameter outside the params, that's all ? THANKS !!! hvala puno pool.anyg.rs webchain pool
|
|
|
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, which will follow the rules of the network no matter what miners do. Even if every miner decided to create 1000 bitcoins per block, full nodes would stick to the rules and reject those blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
doktor83 (OP)
|
|
December 28, 2018, 03:32:25 PM |
|
to doctor83
Hi, pls add "worker-id" param to srbminer (otherwise statistics on a webchain pool is incorrectly displayed )
also problem with pool {"id":1,"jsonrpc":"2.0","method":"login","worker":"Rig-9","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"XMRig/2.7.3-beta (Windows NT 10.0; Win64; x64) libuv/1.23.0 msvc/2017"}}. {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.4","rigid":"id=Rig-9"}} I don't understand what you are trying to say here valid login {"id":1,"jsonrpc":"2.0","method":"login","worker":"Rig-9","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"XMRig/2.7.3-beta (Windows NT 10.0; Win64; x64) libuv/1.23.0 msvc/2017"}}. srbminer login {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":" 0xbe3b1d8317c71ff4d35060a984e36b7102b3103c","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.4","rigid":"id=Rig-9"}} need help to modify my pool pool code: import "encoding/json" type JSONRpcReq struct { Id json.RawMessage `json:"id"` Method string `json:"method"` Params json.RawMessage `json:"params"` } type StratumReq struct { JSONRpcReq Worker string `json:"worker"` } No need to modify pool, i can modify the json. So it needs a "worker" parameter outside the params, that's all ? THANKS !!! hvala puno pool.anyg.rs webchain pool [2018-12-28 16:31:08] json_send: {"id":1,"jsonrpc": "2.0","method":"login","worker":"SRB","params":{"login":"","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.5"}} Bice OK ? ps. stavicu tvoj pool za devfee mining
|
|
|
|
shera037
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 28, 2018, 03:45:42 PM |
|
to doctor83
Hi, pls add "worker-id" param to srbminer (otherwise statistics on a webchain pool is incorrectly displayed )
also problem with pool {"id":1,"jsonrpc":"2.0","method":"login","worker":"Rig-9","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"XMRig/2.7.3-beta (Windows NT 10.0; Win64; x64) libuv/1.23.0 msvc/2017"}}. {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.4","rigid":"id=Rig-9"}} I don't understand what you are trying to say here valid login {"id":1,"jsonrpc":"2.0","method":"login","worker":"Rig-9","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"XMRig/2.7.3-beta (Windows NT 10.0; Win64; x64) libuv/1.23.0 msvc/2017"}}. srbminer login {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":" 0xbe3b1d8317c71ff4d35060a984e36b7102b3103c","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.4","rigid":"id=Rig-9"}} need help to modify my pool pool code: import "encoding/json" type JSONRpcReq struct { Id json.RawMessage `json:"id"` Method string `json:"method"` Params json.RawMessage `json:"params"` } type StratumReq struct { JSONRpcReq Worker string `json:"worker"` } No need to modify pool, i can modify the json. So it needs a "worker" parameter outside the params, that's all ? THANKS !!! hvala puno pool.anyg.rs webchain pool [2018-12-28 16:31:08] json_send: {"id":1,"jsonrpc": "2.0","method":"login","worker":"SRB","params":{"login":"","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.5"}} Bice OK ? ps. stavicu tvoj pool za devfee mining Hvala
|
|
|
|
Xeil
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 28, 2018, 06:29:47 PM |
|
How does webchain specify worker-id?
|
|
|
|
shera037
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 28, 2018, 06:52:33 PM |
|
How does webchain specify worker-id?
Read posts abowe valid login {"id":1,"jsonrpc":"2.0","method":"login", "worker":"Rig-9","params":{"login":" 0xbe3b3d8317c71ff4d35060a984e36b7107b3103c","pass":"x","agent":"XMRig/2.7.3-beta (Windows NT 10.0; Win64; x64) libuv/1.23.0 msvc/2017"}}. invalid login {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":" 0xbe3b1d8317c71ff4d35060a984e36b7102b3103c","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.7.4", "rigid":"Rig-9"}}
|
|
|
|
shera037
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 28, 2018, 07:15:23 PM |
|
za doktora limit za pm mi je na 1
{"id":521,"jsonrpc":"2.0","method":"submit","worker":"Rig-9","params":{"id":"0","job_id":"e676425e98f96eca13f840ca257ea73e","nonce":"0e0200a0bd010000","result":"0000405e8de648cb84562234d61b39c1771edaa54759030c819a58dd87f23fda"}}
|
|
|
|
Xeil
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 28, 2018, 07:21:09 PM |
|
za doktora limit za pm mi je na 1
{"id":521,"jsonrpc":"2.0","method":"submit","worker":"Rig-9","params":{"id":"0","job_id":"e676425e98f96eca13f840ca257ea73e","nonce":"0e0200a0bd010000","result":"0000405e8de648cb84562234d61b39c1771edaa54759030c819a58dd87f23fda"}}
What to do with it?
|
|
|
|
shera037
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 28, 2018, 07:33:46 PM |
|
za doktora limit za pm mi je na 1
{"id":521,"jsonrpc":"2.0","method":"submit","worker":"Rig-9","params":{"id":"0","job_id":"e676425e98f96eca13f840ca257ea73e","nonce":"0e0200a0bd010000","result":"0000405e8de648cb84562234d61b39c1771edaa54759030c819a58dd87f23fda"}}
What to do with it? that`s for member doktor83 your replay is above https://bitcointalk.org/index.php?topic=3167363.msg48935656#msg48935656
|
|
|
|
Tavros1
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 28, 2018, 09:53:42 PM |
|
Hello Doktor. Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)? With v1.7.2 - 1250+ With v1.7.4 - 1000-
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
December 29, 2018, 04:45:33 AM |
|
To doctor83:
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
December 29, 2018, 05:47:53 AM |
|
Hello Doktor. Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)? With v1.7.2 - 1250+ With v1.7.4 - 1000- use 1.7.4 now tube algo. GPU7 rx580 8 gb [2018-12-29 08:46:53] GPU0 : 1122 H/s [T: 49c, RPM: 822, CC: 1150 MHz, MC: 2030 MHz][BUS:1] [2018-12-29 08:46:53] GPU1 : 1122 H/s [T: 49c, RPM: 943, CC: 1150 MHz, MC: 2030 MHz][BUS:2] [2018-12-29 08:46:53] GPU2 : 1119 H/s [T: 49c, RPM: 974, CC: 1150 MHz, MC: 2030 MHz][BUS:3] [2018-12-29 08:46:53] GPU3 : 1068 H/s [T: 39c, RPM: 1097, CC: 1150 MHz, MC: 1900 MHz][BUS:4] [2018-12-29 08:46:53] GPU4 : 1121 H/s [T: 48c, RPM: 1009, CC: 1150 MHz, MC: 2030 MHz][BUS:6] [2018-12-29 08:46:53] GPU5 : 1120 H/s [T: 49c, RPM: 1250, CC: 1150 MHz, MC: 2030 MHz][BUS:7] [2018-12-29 08:46:53] GPU6 : 1122 H/s [T: 47c, RPM: 925, CC: 1150 MHz, MC: 2030 MHz][BUS:8] [2018-12-29 08:46:53] GPU7 : 1164 H/s [T: 50c, RPM: 1635, CC: 1150 MHz, MC: 2000 MHz][BUS:9]
|
|
|
|
doktor83 (OP)
|
|
December 29, 2018, 05:56:36 AM |
|
Hello Doktor. Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)? With v1.7.2 - 1250+ With v1.7.4 - 1000- Nothing has changed you should have the same speed or maybe a few hashes more. To doctor83:
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Maybe your PSU is weak for 6 vegas + algo you are using ? You should probably tune your cards with PPT and overdriventtool if you haven't done so yet.
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
December 29, 2018, 06:13:14 AM |
|
Hello Doktor. Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)? With v1.7.2 - 1250+ With v1.7.4 - 1000- Nothing has changed you should have the same speed or maybe a few hashes more. To doctor83:
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Maybe your PSU is weak for 6 vegas + algo you are using ? You should probably tune your cards with PPT and overdriventtool if you haven't done so yet. I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
|
|
|
|
Mashy81
Jr. Member
Offline
Activity: 225
Merit: 1
|
|
December 29, 2018, 06:20:37 AM |
|
Hello Doktor. Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)? With v1.7.2 - 1250+ With v1.7.4 - 1000- Nothing has changed you should have the same speed or maybe a few hashes more. To doctor83:
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Maybe your PSU is weak for 6 vegas + algo you are using ? You should probably tune your cards with PPT and overdriventtool if you haven't done so yet. I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it. It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen. Its not the software. Its your settings I would say
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
December 29, 2018, 07:30:02 AM |
|
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen. Its not the software. Its your settings I would say It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100. GPU_P0=852;800;0 GPU_P1=991;900;0 GPU_P2=1084;950;0 GPU_P3=1138;1000;0 GPU_P4=1200;1050;0 GPU_P5=1401;1100;0 GPU_P6=1536;1150;0 GPU_P7=1552;840 Mem_P0=167;800;0 Mem_P1=500;800;0 Mem_P2=800;950;0 Mem_P3=1100;875 Fan_Min=2750 Fan_Max=3500 Fan_Target=65 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 This is the v8 setting for miner. { "cryptonight_type" : "normalv8", "intensity" : 120, "worksize" : 16, "double_threads" : true }
|
|
|
|
doktor83 (OP)
|
|
December 29, 2018, 07:37:15 AM |
|
I am pretty sure the power consumption isnt just 'growing' because of the miner, if that was the case then there would be reports of it already and a lot of dead rigs
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
December 29, 2018, 07:44:10 AM |
|
I am pretty sure the power consumption isnt just 'growing' because of the miner, if that was the case then there would be reports of it already and a lot of dead rigs Please, do not get me wrong. I think it is a great miner and I am using it for months. The other guy mentioned it may be the setting issue and i believe it makes sense. Could you take a look at the settings?
|
|
|
|
chup
Sr. Member
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
|
December 29, 2018, 08:16:25 AM |
|
Please, do not get me wrong. I think it is a great miner and I am using it for months. The other guy mentioned it may be the setting issue and i believe it makes sense. Could you take a look at the settings?
At first look, too high frequencies (core/mem) with too low voltages. Not surprised that it crashes driver from time to time. Anyhow, fuse tripping at 2KW should be something for experienced electrician.
|
|
|
|
carlosmonaco
Newbie
Offline
Activity: 105
Merit: 0
|
|
December 29, 2018, 11:38:54 AM |
|
Hello everyone, I used this miner for a while on my rigs but I can't get them stable. Using windows 10 with 18.6.1 drivers ( srb almost stable)
I use only reference card with blower, vega 56 and vega 64 and some vega 56 with 64 bios . Im using these PPT for all cards Core P0-P6 : 900mv Mem P0-P2 : 900mV
Most of the card are running 1395 core 945 Mem for Vega56 and 1395 core 1090 mem for Vega 64 . (925-900 for some 56, 1025 for some 64) Best one are running 870mv core 850 mv Mem, bad ones 950 core and 900-930 mem.
The best hashrate I can get with that settings are 2020h/s for vega 64 but average is around 1950h/s for 64 and 1900h/s for Vega 56.
Someone can help me to find best settings for reference card , PPT ? overdriventool settings ? Miner setting?
|
|
|
|
doktor83 (OP)
|
|
December 29, 2018, 11:50:38 AM |
|
Hello everyone, I used this miner for a while on my rigs but I can't get them stable. Using windows 10 with 18.6.1 drivers ( srb almost stable)
I use only reference card with blower, vega 56 and vega 64 and some vega 56 with 64 bios . Im using these PPT for all cards Core P0-P6 : 900mv Mem P0-P2 : 900mV
Most of the card are running 1395 core 945 Mem for Vega56 and 1395 core 1090 mem for Vega 64 . (925-900 for some 56, 1025 for some 64) Best one are running 870mv core 850 mv Mem, bad ones 950 core and 900-930 mem.
The best hashrate I can get with that settings are 2020h/s for vega 64 but average is around 1950h/s for 64 and 1900h/s for Vega 56.
Someone can help me to find best settings for reference card , PPT ? overdriventool settings ? Miner setting?
Can you decide which miner are you using, TRM or SRB? I see you pasted exactly this same text in their thread.
|
|
|
|
|