Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Claymore]

Hi, Claymore, thanks for the new v.4.4.
I use parametr -tstop.
But stop minning other GPU.

Example:
Use 4GPU
-tstop 80,80,80,80

GPU0 t=67, GPU1 t=68, GPU2 t=67, GPU3 t=80
GPU3 t=80 not minning stopped, stopped GPU0 t=67.

Maybe need to do the right sort GPU?

Please check "KNOWN ISSUES" section of readme or OP. Anyway, I will add a note for "-tstop" option description in readme. And it seems I need to return option to close miner instead of stopping one GPU because if you did not correct ordering it can cause bad things.

[1715621660]

1715621660

[1715621660]

1715621660

[1715621660]

1715621660

[1715621660]

1715621660

[zorvalth]

Amazing miner, couldn't be more easier, here is demonstration how i change pool with a couple clicks on 7 rigs placed in 4 different locations:)

https://streamable.com/ek3l

[elzium]

And it seems I need to return option to close miner instead of stopping one GPU because if you did not correct ordering it can cause bad things.

Or disable cards one by one until no more tempalarm, then flag faulty one and enable others.

[Claymore]

And it seems I need to return option to close miner instead of stopping one GPU because if you did not correct ordering it can cause bad things.

Or disable cards one by one until no more tempalarm, then flag faulty one and enable others.

I don't see any ways to implement it properly:
1. GPU temp can reach stop threshold and then become a bit less.
2. Several GPUs can reach threshold at the same time.
3. It will take a lot of time to detect cards for system with many GPUs.

Better way is to create some special mode to detect "-di " values which will correct GPU order. For example, you press "d" button, miner stops mining, and loads every card one by one, check temps and understands its order. In a couple of minutes after checking all GPUs miner shows you what "-di" value you must use. This way it will also fix issue with incorrect GPU indexes in temperature/fan stats that miner displays.
Another option is to check if GPU is still overheated in 30 seconds after disabling mining on it, such behaviour means that we disabled wrong card and entire miner will be closed.

[razorgames]

@Claymore any luck with the proxy from GenEthOS?
Feel free to use mine to test if you wish. I sent you a pm with the details.

[elzium]

And it seems I need to return option to close miner instead of stopping one GPU because if you did not correct ordering it can cause bad things.

Or disable cards one by one until no more tempalarm, then flag faulty one and enable others.

I don't see any ways to implement it properly:
1. GPU temp can reach stop threshold and then become a bit less.
2. Several GPUs can reach threshold at the same time.
3. It will take a lot of time to detect cards for system with many GPUs.

Better way is to create some special mode to detect "-di " values which will correct GPU order. For example, you press "d" button, miner stops mining, and loads every card one by one, check temps and understands its order. In a couple of minutes after checking all GPUs miner shows you what "-di" value you must use. This way it will also fix issue with incorrect GPU indexes in temperature/fan stats that miner displays.
Another option is to check if GPU is still overheated in 30 seconds after disabling mining on it, such behaviour means that we disabled wrong card and entire miner will be closed.

Assuming you can see which number went off limit, u monitor this same number when turning cards off. Disable, wait 5sec, if temp dont drop 5 degrees enable, take next.

[citronick]

anybody tried R9-Nanos on ETH and DCR?
whats the best you could squeeze out of them for performance?
Need to know the baseline best settings at stock, before I apply some mod.... 

[Alehandros]

anybody tried R9-Nanos on ETH and DCR?
whats the best you could squeeze out of them for performance?
Need to know the baseline best settings at stock, before I apply some mod....  

Have 3x 6 card R9 nano rigs, v15 drivers *seem* to be best, you should get 150 mh/s without much trouble.

Am interested to see what you can squeeze out of these babys!

edit: ETH 150 mh/s + DCR 2.5 gh/s per rig

[billsmith]

Ready the first version of the monitoring for Android - https://play.google.com/store/apps/details?id=ua.com.bcmob.claymoresdualminermonitor

[clintar2]

Every known stratum version is now supported directly at eth.cncoin.farm. Claymore's miner supported using -esm 0 1 or 2 . Can I get more people testing to verify it works ok for you?

Note: Pool fee will go to 1% after we hit the next block and it pays out.

Are you the operator of CNcoin.farm? 430% wow. Figured I'd give it a try and stuck in this crazy 2+ days round

Don't see anything wrong. I've been testing everything and mining testnet blocks all day. I see nothing wrong with the pool, but no block. I'm going to revert the updated stratum code and count this as a huge failure. Sorry to waste everyone's mining!

[hawkfish007]

anybody tried R9-Nanos on ETH and DCR?
whats the best you could squeeze out of them for performance?
Need to know the baseline best settings at stock, before I apply some mod....  

I am getting 48+ MH/s ETH and 731 MH/s DCR at default settings (ethi 8 dcri 30) at 417-420 Watt at the wall (using EVGA G2 on 110V, only have 110V kill-a-watt but mining on 240V). At dcri 40, I get about 1 GH/s DCR and 47 MH/s ETH at a slightly higher wattage. However, using Crimson 16.5, I am getting 53+ MH/s ETH only mode at 410 watt. I am mining ETH only at the moment.

Edit: with 2 Sapphire R9 Nanos.

[peoples]

@Claymore

Maybe you can add the possibility to define log filename and location. Usefull to get static log file name and place it to /var/run ..

[Claymore]

@Claymore

Maybe you can add the possibility to define log filename and location. Usefull to get static log file name and place it to /var/run ..

Ok, I'll add an option for that.

[1337leet]

I use v4.4 is it possible to set a "max-temp" so that the miner stops working as soon as this temperature limit is hit?

just saw it's -tstop.

Whre do I need to add this? At the end of my batch?

if i add "-tstop 88" it will stop mining if one of the cards reaches 88 degrees - right?

Will it automatically start if the temperature goes below the 88 degrees again?

[block19]

Ready the first version of the monitoring for Android - https://play.google.com/store/apps/details?id=ua.com.bcmob.claymoresdualminermonitor

is it safety to use? who use it? afraid for 2fa and security

[Lucky - Luciano]

Anyone have luck getting Win10 to detect 3 X 295x2? I have 2 running fine (4 GPUs), tried to add a 3rd for a total of 6 GPUs using a powered riser but will not detect the 2 additional GPU's and looking at the win logs, looks like its crashing on loading the driver for the additional card. So device manager also shows the 4 GPUs that are working. Power not an issue, using multiple EVGA's 1300's

BTW, I have tried the 15.12 drivers and also the newest drivers, no luck PC still only recognized 2 cards (4 GPUs). Tried both on-board and using powered PCIe extensions, same result. Any ideas?

  At the BIOS for graphics cards that OS does not see, adjust the PCI-e Gen 2.0 ( instead 3.0) .

[offon]

4x7950 some problem here on version 4.2 work great, but on version v.4.4 cannot create DAG on one card.

[1337leet]

4x7950 some problem here on version 4.2 work great, but on version v.4.4 cannot create DAG on one card.

I had the same problem. You need to set the virtual memory to 16 GB.

[PPOC]

Every known stratum version is now supported directly at eth.cncoin.farm. Claymore's miner supported using -esm 0 1 or 2 . Can I get more people testing to verify it works ok for you?

Note: Pool fee will go to 1% after we hit the next block and it pays out.

Are you the operator of CNcoin.farm? 430% wow. Figured I'd give it a try and stuck in this crazy 2+ days round

Don't see anything wrong. I've been testing everything and mining testnet blocks all day. I see nothing wrong with the pool, but no block. I'm going to revert the updated stratum code and count this as a huge failure. Sorry to waste everyone's mining!

Yea, wow. I hung in there for 646%. almost 4 days where I would have made 20+ ETH on another pool. Do you have your own thread for the pool? It would be good to know there was testing going on or at least some updates etc. I like to support smaller pools but a 4 day experiment is hard to swallow.

Thanks,

[pacolito]

I was trying to switch to ethermine.org but having issues with my command line ... can someone let me know if this is correct?

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -esm 1 -ewal <myetheraddress> -epsw x

Thanks in advance.