bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
February 01, 2014, 06:28:27 PM |
|
You can also prepare the ultracoin.conf.
|
Not your keys, not your coins!
|
|
|
cbuchner1 (OP)
|
|
February 01, 2014, 06:30:11 PM |
|
I seriously doubt mining ultracoin using cudaminer with nFactor 4,5,6 will be efficient At nFactor 7 you can expect 2 MHash from a GTX 780Ti. Christian
|
|
|
|
spherix
Newbie
Offline
Activity: 13
Merit: 0
|
|
February 01, 2014, 06:32:35 PM |
|
about ultracoin startup saw this in the thread
use --scrypt-jane --sj-time 1387769316 --sj-nfmin 4 --sj-nfmax 30
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
February 01, 2014, 06:34:42 PM |
|
I saw 1388361600, but if either is true, it will start at N 9
|
Not your keys, not your coins!
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
February 01, 2014, 06:39:11 PM |
|
I saw 1388361600, but if either is true, it will start at N 9
I also saw this value in the bat file of the ultracoin miner (not sure to understand why they are making an ultracoin miner if it is just a copycat of cgminer...) At least if it N=9, I won't have to run the autotune
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
cbuchner1 (OP)
|
|
February 01, 2014, 06:42:20 PM |
|
I saw 1388361600, but if either is true, it will start at N 9
does not make sense to put the chain start time at Dec 30th 2013: http://www.convert-unix-time.com/?t=1388361600 unless the dev has created the genesis block way back then
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
February 01, 2014, 06:45:34 PM |
|
I saw 1388361600, but if either is true, it will start at N 9
does not make sense to put the chain start time at Dec 30th 2013: http://www.convert-unix-time.com/?t=1388361600 unless the dev has created the genesis block way back then They did the inverse of what MRC dev did. They released first their web page then the coin
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Wipeout2097
Sr. Member
Offline
Activity: 840
Merit: 255
SportsIcon - Connect With Your Sports Heroes
|
|
February 01, 2014, 06:48:00 PM |
|
Sorry for the offtopic, I understand that this about the miner, but this ends up being the "go to" thread for who is interested in mining with Nvidia. There's a thread elsewhere that proves ATI cards are affected by vram latency and someone offers to optimize their bios. I wonder what kind of performance would one get if Nvidia cards had such firmware optimization. Is there any software that allows one to experiment with memory tweaking or allows bios modding currently? I remember about Nibitor from the 8800gt days...
I'd like to see an answer to this, please. Or where can I discuss Nvidia mining when it doesn't relate directly to cudaMiner?
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
February 01, 2014, 06:50:20 PM |
|
I saw 1388361600, but if either is true, it will start at N 9
does not make sense to put the chain start time at Dec 30th 2013: http://www.convert-unix-time.com/?t=1388361600 unless the dev has created the genesis block way back then Guess when was the first post of one of the devs, (Bumface) in the newbie section? Yep, December 30, 2013.
|
Not your keys, not your coins!
|
|
|
cbuchner1 (OP)
|
|
February 01, 2014, 06:51:39 PM |
|
there are BIOS mods for GTX 780 (Ti) but mostly related to TDP and voltage limits. There is also an editor for kepler card BIOSes but the new 7xx GPU series BIOS is pretty locked down so trying this tool on them might brick your cards. It will work on the 6xx series of cards.
the nVidia cards tend to be limited by their compute resources when mining, not so much by their memory access. By underclocking your memory you don't significantly lose performance with cudaminer.
Christian
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
February 01, 2014, 06:52:22 PM |
|
Sorry for the offtopic, I understand that this about the miner, but this ends up being the "go to" thread for who is interested in mining with Nvidia. There's a thread elsewhere that proves ATI cards are affected by vram latency and someone offers to optimize their bios. I wonder what kind of performance would one get if Nvidia cards had such firmware optimization. Is there any software that allows one to experiment with memory tweaking or allows bios modding currently? I remember about Nibitor from the 8800gt days...
I'd like to see an answer to this, please. Or where can I discuss Nvidia mining when it doesn't relate directly to cudaMiner? KeplerBiosTweaker version 1.26 (I am not entirely sure this was your question though...)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Stanr010
Member
Offline
Activity: 70
Merit: 10
|
|
February 01, 2014, 07:15:01 PM Last edit: February 01, 2014, 07:43:19 PM by Stanr010 |
|
How are my GTX 780s I doing against GTX 780 Ti's?
|
|
|
|
ManIkWeet
|
|
February 01, 2014, 07:18:15 PM |
|
How am I doing against you GTX 780 Ti's? The hashrate isn't superior, my GTX 780 (not TI) gets 560khash/s, but I am yealous of that water cooling
|
BTC donations: 18fw6ZjYkN7xNxfVWbsRmBvD6jBAChRQVn (thanks!)
|
|
|
cbuchner1 (OP)
|
|
February 01, 2014, 07:30:29 PM |
|
for UltraCoin, use --algo=scrypt-jane:UTC in the latest github their wallet and everything can be found here: http://www.ultracoin.net/I've already solo'ed my first 100 UTC. And they mature quickly. Quicker than any other coin I've mined so far.
|
|
|
|
Stanr010
Member
Offline
Activity: 70
Merit: 10
|
|
February 01, 2014, 07:41:26 PM |
|
How am I doing against you GTX 780 Ti's? The hashrate isn't superior, my GTX 780 (not TI) gets 560khash/s, but I am yealous of that water cooling I'm patiently waiting for the new revision of cudaminer coming out either today or tomorrow. Hopefully I'll be pushing 700kh/s on my cards after the updates.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
February 01, 2014, 07:41:43 PM |
|
got one booooo so far....
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
cbuchner1 (OP)
|
|
February 01, 2014, 07:44:34 PM |
|
got one booooo so far....
maybe setting a short scantime (-s option) of 3 or 5 seconds might lower the chance of boo's.
|
|
|
|
bigjme
|
|
February 01, 2014, 08:15:29 PM |
|
I may have to try ultracoin later. Microcoin solo mining is hard
|
Owner of: cudamining.co.uk
|
|
|
SystmHash
Newbie
Offline
Activity: 37
Merit: 0
|
|
February 01, 2014, 08:21:15 PM |
|
With the new version of Cudaminer you should be able to hit 700, My overclock is at 1268Mhz on Air and with cudaminer.exe -d 0 -H 2 -C 0 -m 1 -l Z12x24 I am hitting 680Kh/s
|
|
|
|
kokes
Member
Offline
Activity: 66
Merit: 10
|
|
February 01, 2014, 08:58:47 PM |
|
for UltraCoin, use --algo=scrypt-jane:UTC in the latest github their wallet and everything can be found here: http://www.ultracoin.net/I've already solo'ed my first 100 UTC. And they mature quickly. Quicker than any other coin I've mined so far. What's the full code, i get this? cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 1 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u XXXX -p X Something is still wrong
|
|
|
|
|