SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

{
"cryptonight_type" : "stellitev8",
"intensity" : 0,
"double_threads" : true
[
{“id”：0，“kernel”：1，“intensity”：60，“worksize”：16，“threads”：1，“ double_threads“：false，”target_temperature“：90，”target_fan_speed“：2500，”off_temperature“：90，”adl_type“：1}，
]
}

这个格式怎么设置的，尝试了很久都没做出来 ，谢谢请帮忙，1.7.3可以通过参数设置自动本机名和风扇转速吗，请告诉我在哪里设置，格式

I am trying with google translator here, so not sure i understand you, what automatic name are you talking about?
The one used in the API ?

Also stellite hasn't forked yet

Your example should look like this :

Code:

{
"cryptonight_type" : "stellitev8",
"intensity" : 0,
"double_threads" : true,
"gpu_conf" : 
[ 
	{ 
	  "id" : 0, 
	  "intensity" : 60, 
	  "worksize" : 16, 
	  "threads" : 1,
	  "target_temperature" : 90,
	  "target_fan_speed" : 2500,
	  "off_temperature" : 90,
	  "adl_type" : 1
	}
]
}

But some values in this config dont make any sense, like target_temperature = 90, but off_temperature is also 90, and set only fan_speed or target_temperature, not both.

[sangraf]

I successfully used srbminer 1.6.8 on nanopool. I install v1.7.3, copy file pools of 1.6.8 in 1.7.3. srbminer works, but on nanopool worker no visible. Same 1.7.2
I mining XMR v8

[doktor83]

I successfully used srbminer 1.6.8 on nanopool. I install v1.7.3, copy file pools of 1.6.8 in 1.7.3. srbminer works, but on nanopool worker no visible. Same 1.7.2

So you should check your start.bat , that it points to the right config & pool file.

[sangraf]

I successfully used srbminer 1.6.8 on nanopool. I install v1.7.3, copy file pools of 1.6.8 in 1.7.3. srbminer works, but on nanopool worker no visible. Same 1.7.2

So you should check your start.bat , that it points to the right config & pool file.

My start.bat

Code:

setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0

cls
for /f "tokens=2 delims==" %%a in ('wmic OS Get localdatetime /value') do set "dt=%%a"
set LOGTIME=%dt:~0,4%_%dt:~4,2%_%dt:~6,2%_%dt:~8,2%_%dt:~10,2%_%dt:~12,2%
set LOGTIME=%LOGTIME: =%
set LOGTIME=%LOGTIME:,=.%.txt

SRBMiner-CN.exe --config Config\config-normalv8.txt --pools pools.txt --logfile %LOGTIME%

my pools

Code:

{
"pools" :
[
	{
		"pool" : "xmr-eu1.nanopool.org:14444", 
		"wallet" : "85**w.550/sangraf@***.com", 
		"password" : "x"
	},
	{
		"pool" : "xmr-eu2.nanopool.org:14444", 
		"wallet" : "85**w.550/sangraf@***.com", 
		"password" : "x"
	}
]
}

[patmontes]

Hey everyone are these temps normal for Bittubev2?
I'm using Rx580s and 480s at 900mv.
Using version 1.7.2 algoswitching monero ocean
http://i68.tinypic.com/2rcy7lu.jpg

[doktor83]

V1.7.4
- Added algo 'Webchain'
- Added algo 'Turtle'
- Tiny speed increase on some cards
- Fixed bug with 'off_temperature'
- Added --cgpuofftemperature to cmd parameters
- Added --cgpuoldmode to cmd parameters
- Added --nocache to cmd parameters
- Added 'off_temperature' display to API
- Added GPU temperature display in log
- Added --cgpuoldmode to cmd parameters
- Fixed auto setup for Hycon
- Fixed a bug with algo switching that could crash miner


+ 'off_temperature' is now disabled by default (previous version was set to 85c).
+ added --nocache parameter to .bat, if used, no binaries will be saved to disk
+ there was a bug in 173 that could crash miner on algo change, hopefully it is fixed now
+ some cards got a tiny hashrate increase

[abg00]

V1.7.4

tube algo/ have error
 Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 2) [Increase virtual mem]

swap 92 gb
two card only

device 1 rx480 4 gb

[doktor83]

V1.7.4

tube algo/ have error
 Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 2) [Increase virtual mem]

swap 92 gb
two card only

device 1 rx480 4 gb

you just copied new version over the old one and haven't clear the cache folder didn't you

[abg00]

V1.7.4

tube algo/ have error
 Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 2) [Increase virtual mem]

swap 92 gb
two card only

device 1 rx480 4 gb

you just copied new version over the old one and haven't clear the cache folder didn't you

need old cache?

[doktor83]

V1.7.4

tube algo/ have error
 Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 2) [Increase virtual mem]

swap 92 gb
two card only

device 1 rx480 4 gb

you just copied new version over the old one and haven't clear the cache folder didn't you

need old cache?

need to read first page where it's written:

Don't copy newer version of miner over old one, or if you do make sure you delete .srb files from Cache folder before running it!

[abg00]

need to read first page where it's written:

Don't copy newer version of miner over old one, or if you do make sure you delete .srb files from Cache folder before running it!

cache folder clean/ but have error

[2018-12-27 15:57:54] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for cn0, bloblen for DeviceID 1 (Thread 3)
[2018-12-27 15:57:54] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for cn0, bloblen for DeviceID 1 (Thread 2)
[2018-12-27 15:57:54] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 3) [Increase virtual mem]
[2018-12-27 15:57:55] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 1 for DeviceID 1 (Thread 2) [Increase virtual mem]

[abg00]

two card in test rig
rx480 4 gb and !!!!! r9 290 4gb
off r9 290 card and all work
1.7.4 have trouble with old card

[doktor83]

two card in test rig
rx480 4 gb and !!!!! r9 290 4gb
off r9 290 card and all work
1.7.4 have trouble with old card

going to check that out, i know that rx480 works, but probably i forgot to update the kernel for old cards

edit:
Bingo, re-uploaded , try it now and report

[patmontes]

Hey everyone are these temps normal for Bittubev2?
I'm using Rx580s and 480s at 900mv.
Using version 1.7.2 algoswitching monero ocean
http://i68.tinypic.com/2rcy7lu.jpg

Dok,
Did I use the target temp paramter in config correctly?
{
"cryptonight_type" : "bittubev2",
"intensity" : 0,
"double_threads" : true,
"adl_type" : 1,
"min_rig_speed" : 4000,
"target_temperature" : 65,
}

[abg00]

two card in test rig
rx480 4 gb and !!!!! r9 290 4gb
off r9 290 card and all work
1.7.4 have trouble with old card

going to check that out, i know that rx480 works, but probably i forgot to update the kernel for old cards

edit:
Bingo, re-uploaded , try it now and report

work fine
bit more rate +1-3% on both card with same config

[spearbuilders]

Getting Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram [ctx->Program] for DeviceID 6 (Thread 12)

Have 8 GPUs on this rig. Any idea what to do? Thanks so much for any help.

[dudee]

v1.7.1 Total:    14920 H/s
v1.7.4 Total:    16367 H/s
13x rx580 all same conf, heavy algo.
awesome

[doktor83]

I re-uploaded 1.7.4 if anyone was wondering, because i fixed a bug with webchain, that caused compute errors on some cards.

[yslyung]

any reported hashrates for webchain ?looking fwd to try out srbminer soon. thx for the hardwork

[sharix80]

More STALE and DUPLICATE share on webchain algo. No worker statistic, need worker-id parameter. Please, fix it. Thanks.