treanski
Full Member
 Offline
Activity: 364
Merit: 106
ONe Social Network.
|
 |
July 14, 2018, 09:57:41 PM |
|
guy, I am trying to run some rx580 4gb on bittube, anyone have any luck with these? Running dual threads in auto intensity.
1. yes mienr runs fine on bittubev2 2. dont use autointensity... 112/16 for v7, 56/8 for heavy |
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
|
|
|
JacksCoins
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 14, 2018, 11:02:46 PM |
|
Hi, Been using the miner for couple of days now and i dunno what it is but it looks like its getting tired. It starts hopefull at decent hashrate but gets slower and slower the longer the miner is running. Here are some examples taken from the miner screen: [2018-07-13 22:56:10] Total: 5625 H/s
[2018-07-14 05:43:35] Total: 5415 H/s
[2018-07-14 13:07:55] Total: 5318 H/s
[2018-07-14 15:31:56] Total: 5256 H/s
[2018-07-14 15:38:07] Total: 5167 H/s I then rebooted the miner and restarted the software and again it started decent while dropping the longer its running. so i then did another reboot (now shutting down and cutting power before rebooting) but now its looking even more dramatic. Hashrate is now around 4.75Kh/s and is not going up where it should be around 5.6kh/s (edit) Running window 10 Using 6x ASUS RX 580 dual OC 8Gb cards. driver: Crimson blockchain driver Bios stepping modded for ethash. Core: 1150 Core voltage: 900 Mem: 2160 Mem voltage: 950 Any suggestions why its getting slower all the time? BR Jack |
|
|
|
|
xoplo82
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 14, 2018, 11:20:07 PM |
|
hi could you make big change since v1.6.0 ? it make err on my shappire rx550 4gb when use manually vga config, always show like this and srb miner get close :
[2018-07-14 21:41:38] Miner version: 1.6.4
[2018-07-14 21:41:38] Windows version: 6.1 build 7601
[2018-07-14 21:41:39] Video driver version: 22.19.659.1
[2018-07-14 21:41:40] AMD Platform ID: 0
[2018-07-14 21:41:40] AMD platform FOUND
[2018-07-14 21:41:40] Found 5 AMD devices
[2018-07-14 21:41:40] CPU AES-NI: FALSE
[2018-07-14 21:41:40] GPU0: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-07-14 21:41:40] GPU1: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-07-14 21:41:40] GPU2: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 5]
[2018-07-14 21:41:40] GPU3: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-07-14 21:41:40] GPU4: Radeon RX 550 Series [Baffin] [4096 MB][Intensity 24.0][W: 16][T: 2][K: 1][BUS: 2]
[2018-07-14 21:41:40] ADL is enabled
[2018-07-14 21:41:40] Cryptonight Italo mode enabled
[2018-07-14 21:41:40] DevFee pool SET
[2018-07-14 21:41:40] DevFee address SET
[2018-07-14 21:41:40] Starting init of mining threads
[2018-07-14 21:41:41] Loading kernel for DEVICE BUS ID 1 ...
[2018-07-14 21:41:42] Loading kernel for DEVICE BUS ID 1 ...
[2018-07-14 21:41:44] Loading kernel for DEVICE BUS ID 4 ...
[2018-07-14 21:41:45] Loading kernel for DEVICE BUS ID 4 ...
[2018-07-14 21:41:47] Loading kernel for DEVICE BUS ID 5 ...
[2018-07-14 21:41:48] Loading kernel for DEVICE BUS ID 5 ...
[2018-07-14 21:41:50] Loading kernel for DEVICE BUS ID 3 ...
[2018-07-14 21:41:51] Loading kernel for DEVICE BUS ID 3 ...
[2018-07-14 21:41:53] Loading kernel for DEVICE BUS ID 2 ...
[2018-07-14 21:41:53] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram for DeviceID 4 (Thread 8 )
[2018-07-14 21:41:53] Error initing GPU's. Stopping miner process
[2018-07-14 21:41:53] Stopping miner process
everyone help me please why this happen on SRB v1.6.2-1.6.4, on old version is work fine on all algo cnv7 cn7 lite heavy, but with new version getting err on close my SRB, my config is like this on win7x64 driver beta blockchain : { "cryptonight_type" : "italo", "intensity" : 0, "double_threads" : true, *"gpu_conf" : [ { "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 2} ] /* THERE ARE A LOT OF OPTIONS/PARAMETERS YOU CAN USE HERE */ /* YOU CAN FIND THEM IN THE README FILE */ } |
|
|
|
|
|
doktor83
|
|
July 15, 2018, 05:17:09 AM |
|
hi could you make big change since v1.6.0 ? it make err on my shappire rx550 4gb when use manually vga config, always show like this and srb miner get close :
[2018-07-14 21:41:38] Miner version: 1.6.4
[2018-07-14 21:41:38] Windows version: 6.1 build 7601
[2018-07-14 21:41:39] Video driver version: 22.19.659.1
[2018-07-14 21:41:40] AMD Platform ID: 0
[2018-07-14 21:41:40] AMD platform FOUND
[2018-07-14 21:41:40] Found 5 AMD devices
[2018-07-14 21:41:40] CPU AES-NI: FALSE
[2018-07-14 21:41:40] GPU0: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-07-14 21:41:40] GPU1: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-07-14 21:41:40] GPU2: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 5]
[2018-07-14 21:41:40] GPU3: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-07-14 21:41:40] GPU4: Radeon RX 550 Series [Baffin] [4096 MB][Intensity 24.0][W: 16][T: 2][K: 1][BUS: 2]
[2018-07-14 21:41:40] ADL is enabled
[2018-07-14 21:41:40] Cryptonight Italo mode enabled
[2018-07-14 21:41:40] DevFee pool SET
[2018-07-14 21:41:40] DevFee address SET
[2018-07-14 21:41:40] Starting init of mining threads
[2018-07-14 21:41:41] Loading kernel for DEVICE BUS ID 1 ...
[2018-07-14 21:41:42] Loading kernel for DEVICE BUS ID 1 ...
[2018-07-14 21:41:44] Loading kernel for DEVICE BUS ID 4 ...
[2018-07-14 21:41:45] Loading kernel for DEVICE BUS ID 4 ...
[2018-07-14 21:41:47] Loading kernel for DEVICE BUS ID 5 ...
[2018-07-14 21:41:48] Loading kernel for DEVICE BUS ID 5 ...
[2018-07-14 21:41:50] Loading kernel for DEVICE BUS ID 3 ...
[2018-07-14 21:41:51] Loading kernel for DEVICE BUS ID 3 ...
[2018-07-14 21:41:53] Loading kernel for DEVICE BUS ID 2 ...
[2018-07-14 21:41:53] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram for DeviceID 4 (Thread 8 )
[2018-07-14 21:41:53] Error initing GPU's. Stopping miner process
[2018-07-14 21:41:53] Stopping miner process
everyone help me please why this happen on SRB v1.6.2-1.6.4, on old version is work fine on all algo cnv7 cn7 lite heavy, but with new version getting err on close my SRB, my config is like this on win7x64 driver beta blockchain : { "cryptonight_type" : "italo", "intensity" : 0, "double_threads" : true, *"gpu_conf" : [ { "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 2} ] /* THERE ARE A LOT OF OPTIONS/PARAMETERS YOU CAN USE HERE */ /* YOU CAN FIND THEM IN THE README FILE */ } you got an error, there is a * before "gpu_conf". |
|
|
|
xoplo82
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 15, 2018, 08:42:32 AM |
|
hi could you make big change since v1.6.0 ? it make err on my shappire rx550 4gb when use manually vga config, always show like this and srb miner get close :
[2018-07-14 21:41:38] Miner version: 1.6.4
[2018-07-14 21:41:38] Windows version: 6.1 build 7601
[2018-07-14 21:41:39] Video driver version: 22.19.659.1
[2018-07-14 21:41:40] AMD Platform ID: 0
[2018-07-14 21:41:40] AMD platform FOUND
[2018-07-14 21:41:40] Found 5 AMD devices
[2018-07-14 21:41:40] CPU AES-NI: FALSE
[2018-07-14 21:41:40] GPU0: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-07-14 21:41:40] GPU1: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-07-14 21:41:40] GPU2: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 5]
[2018-07-14 21:41:40] GPU3: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-07-14 21:41:40] GPU4: Radeon RX 550 Series [Baffin] [4096 MB][Intensity 24.0][W: 16][T: 2][K: 1][BUS: 2]
[2018-07-14 21:41:40] ADL is enabled
[2018-07-14 21:41:40] Cryptonight Italo mode enabled
[2018-07-14 21:41:40] DevFee pool SET
[2018-07-14 21:41:40] DevFee address SET
[2018-07-14 21:41:40] Starting init of mining threads
[2018-07-14 21:41:41] Loading kernel for DEVICE BUS ID 1 ...
[2018-07-14 21:41:42] Loading kernel for DEVICE BUS ID 1 ...
[2018-07-14 21:41:44] Loading kernel for DEVICE BUS ID 4 ...
[2018-07-14 21:41:45] Loading kernel for DEVICE BUS ID 4 ...
[2018-07-14 21:41:47] Loading kernel for DEVICE BUS ID 5 ...
[2018-07-14 21:41:48] Loading kernel for DEVICE BUS ID 5 ...
[2018-07-14 21:41:50] Loading kernel for DEVICE BUS ID 3 ...
[2018-07-14 21:41:51] Loading kernel for DEVICE BUS ID 3 ...
[2018-07-14 21:41:53] Loading kernel for DEVICE BUS ID 2 ...
[2018-07-14 21:41:53] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram for DeviceID 4 (Thread 8 )
[2018-07-14 21:41:53] Error initing GPU's. Stopping miner process
[2018-07-14 21:41:53] Stopping miner process
everyone help me please why this happen on SRB v1.6.2-1.6.4, on old version is work fine on all algo cnv7 cn7 lite heavy, but with new version getting err on close my SRB, my config is like this on win7x64 driver beta blockchain : { "cryptonight_type" : "italo", "intensity" : 0, "double_threads" : true, *"gpu_conf" : [ { "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 2} ] /* THERE ARE A LOT OF OPTIONS/PARAMETERS YOU CAN USE HERE */ /* YOU CAN FIND THEM IN THE README FILE */ } you got an error, there is a * before "gpu_conf". sorry mistake type the real config is right without "*" and result log file as i type above. it working fine if use intensity 0 without gpu_conf but hast result very bad lost about 30%. |
|
|
|
|
ChillyRide
Newbie
Offline
Activity: 21
Merit: 0
|
|
July 15, 2018, 10:42:37 AM |
|
New 18.7.1 AMD Drivers, SBR 1.6.4, Normalv7 algo dont work.
|
|
|
|
|
Kgonla
Newbie
Offline
Activity: 89
Merit: 0
|
|
July 15, 2018, 05:34:33 PM |
|
[2018-07-14 21:41:40] GPU0: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-07-14 21:41:40] GPU1: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-07-14 21:41:40] GPU2: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 5]
[2018-07-14 21:41:40] GPU3: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-07-14 21:41:40] GPU4: Radeon RX 550 Series [Baffin] [4096 MB][Intensity 24.0][W: 16][T: 2][K: 1][BUS: 2]
{
"cryptonight_type" : "italo",
"intensity" : 0,
"double_threads" : true,
*"gpu_conf" :
[
{ "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2},
{ "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2},
{ "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2},
{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 2}
]
You have worksize 16 for RX 550. Your pagefile must be at least 16 GB size Delete everything inside Cache folder SRBMiner/Cache Use: { "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 4, "intensity" : 28, "worksize" : 8, "threads" : 2} If it do not work change to: { "id" : 0, "intensity" : 12, "worksize" : 8, "threads" : 2}, { "id" : 1, "intensity" : 12, "worksize" : 8, "threads" : 2}, { "id" : 2, "intensity" : 24, "worksize" : 8, "threads" : 2}, { "id" : 3, "intensity" : 24, "worksize" : 8, "threads" : 2}, { "id" : 4, "intensity" : 24, "worksize" : 8, "threads" : 2} If it works this way increase intensity one by one & test |
|
|
|
|
Kgonla
Newbie
Offline
Activity: 89
Merit: 0
|
|
July 15, 2018, 06:13:15 PM |
|
Hi, Been using the miner for couple of days now and i dunno what it is but it looks like its getting tired. It starts hopefull at decent hashrate but gets slower and slower the longer the miner is running. Here are some examples taken from the miner screen: [2018-07-13 22:56:10] Total: 5625 H/s
[2018-07-14 05:43:35] Total: 5415 H/s
[2018-07-14 13:07:55] Total: 5318 H/s
[2018-07-14 15:31:56] Total: 5256 H/s
[2018-07-14 15:38:07] Total: 5167 H/s I then rebooted the miner and restarted the software and again it started decent while dropping the longer its running. so i then did another reboot (now shutting down and cutting power before rebooting) but now its looking even more dramatic. Hashrate is now around 4.75Kh/s and is not going up where it should be around 5.6kh/s (edit) Running window 10 Using 6x ASUS RX 580 dual OC 8Gb cards. driver: Crimson blockchain driver Bios stepping modded for ethash. Core: 1150 Core voltage: 900 Mem: 2160 Mem voltage: 950 Any suggestions why its getting slower all the time? BR Jack Check the temperature of all cards, are all going down or it is one only? Set memory speed to 2050 MHz & test if it happens again. |
|
|
|
|
ripcurrent
Member
Offline
Activity: 150
Merit: 10
|
|
July 16, 2018, 12:46:23 AM |
|
Trying to run 2 rx480 8gb Samsung cards tried auto intensity, 56, 40 , 45....but I cant get these cards over 300h/s on heavy...running same cards on another rig hash 1000ish , increase virtual to 80k but still no go, any words of wisdom?
|
|
|
|
|
xoplo82
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 16, 2018, 04:00:32 AM |
|
[2018-07-14 21:41:40] GPU0: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-07-14 21:41:40] GPU1: Radeon(TM) RX 460 Graphics [Baffin] [2048 MB][Intensity 15.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-07-14 21:41:40] GPU2: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 5]
[2018-07-14 21:41:40] GPU3: Radeon RX 560 Series [Baffin] [4096 MB][Intensity 28.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-07-14 21:41:40] GPU4: Radeon RX 550 Series [Baffin] [4096 MB][Intensity 24.0][W: 16][T: 2][K: 1][BUS: 2]
{
"cryptonight_type" : "italo",
"intensity" : 0,
"double_threads" : true,
*"gpu_conf" :
[
{ "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2},
{ "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2},
{ "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2},
{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 2}
]
You have worksize 16 for RX 550. Your pagefile must be at least 16 GB size Delete everything inside Cache folder SRBMiner/Cache Use: { "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2}, { "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2}, { "id" : 4, "intensity" : 28, "worksize" : 8, "threads" : 2} If it do not work change to: { "id" : 0, "intensity" : 12, "worksize" : 8, "threads" : 2}, { "id" : 1, "intensity" : 12, "worksize" : 8, "threads" : 2}, { "id" : 2, "intensity" : 24, "worksize" : 8, "threads" : 2}, { "id" : 3, "intensity" : 24, "worksize" : 8, "threads" : 2}, { "id" : 4, "intensity" : 24, "worksize" : 8, "threads" : 2} If it works this way increase intensity one by one & test thanks for your attention, i have try your config and same SRB miner close after loading kernel, it only work if i disable gpu_conf and use auto intensity to 0, i use that config before on srb v1.6.0 and before work fine with gpu_conf manually |
|
|
|
|
Kgonla
Newbie
Offline
Activity: 89
Merit: 0
|
|
July 16, 2018, 06:44:50 AM |
|
Use:
{ "id" : 0, "intensity" : 15, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 15, "worksize" : 8, "threads" : 2},
{ "id" : 2, "intensity" : 28, "worksize" : 8, "threads" : 2},
{ "id" : 3, "intensity" : 28, "worksize" : 8, "threads" : 2},
{ "id" : 4, "intensity" : 28, "worksize" : 8, "threads" : 2}
thanks for your attention, i have try your config and same SRB miner close after loading kernel, it only work if i disable gpu_conf and use auto intensity to 0, i use that config before on srb v1.6.0 and before work fine with gpu_conf manually
I think I found the problem. In the last line add a comma, like this: { "id" : 4, "intensity" : 28, "worksize" : 8, "threads" : 2}, |
|
|
|
|
zot57
Newbie
Offline
Activity: 141
Merit: 0
|
|
July 16, 2018, 09:39:02 AM |
|
Anyone noticed how miner1.6.4 and amd drivers 18.6.1 don't work well together on amd rx 580 on Heavy algo. I get half of hashrate than when using amd blockchain drivers. Blockchain drivers are still the best  strange how AMD couldn't develop new functional drivers in all this time. |
|
|
|
|
|
doktor83
|
|
July 16, 2018, 10:29:44 AM |
|
Anyone noticed how miner1.6.4 and amd drivers 18.6.1 don't work well together on amd rx 580 on Heavy algo. I get half of hashrate than when using amd blockchain drivers. Blockchain drivers are still the best strange how AMD couldn't develop new functional drivers in all this time. 18.6.1 is good for CN V7 on Vega cards, gives the most hash. While is worse on heavy than BC for example. Amd stuff.. It is nearly impossible to make a miner that works good on every driver. So that's why people shouldn't switch drivers every time a new one comes out, just stick to the one that's working. |
|
|
|
SpceGhst
Jr. Member
Offline
Activity: 224
Merit: 1
|
|
July 16, 2018, 10:55:37 AM |
|
Trying to run 2 rx480 8gb Samsung cards tried auto intensity, 56, 40 , 45....but I cant get these cards over 300h/s on heavy...running same cards on another rig hash 1000ish , increase virtual to 80k but still no go, any words of wisdom?
Try 18.3.4 driver. Make sure Crossfire is off and cards are in compute mode. Avoid Windows 1803 build. All of my 480/8 get 900 or better on 2 different rigs with this config. |
|
|
|
|
ripcurrent
Member
Offline
Activity: 150
Merit: 10
|
|
July 16, 2018, 05:19:58 PM |
|
Trying to run 2 rx480 8gb Samsung cards tried auto intensity, 56, 40 , 45....but I cant get these cards over 300h/s on heavy...running same cards on another rig hash 1000ish , increase virtual to 80k but still no go, any words of wisdom?
Try 18.3.4 driver. Make sure Crossfire is off and cards are in compute mode. Avoid Windows 1803 build. All of my 480/8 get 900 or better on 2 different rigs with this config. Thank you...the compute mode did it, you allowed me to keep some hair on my head..lol...thanks again |
|
|
|
|
|
doktor83
|
|
July 16, 2018, 07:33:48 PM |
|
Trying to run 2 rx480 8gb Samsung cards tried auto intensity, 56, 40 , 45....but I cant get these cards over 300h/s on heavy...running same cards on another rig hash 1000ish , increase virtual to 80k but still no go, any words of wisdom?
Try 18.3.4 driver. Make sure Crossfire is off and cards are in compute mode. Avoid Windows 1803 build. All of my 480/8 get 900 or better on 2 different rigs with this config. Thank you...the compute mode did it, you allowed me to keep some hair on my head..lol...thanks again Added info in tips section here on how to turn off crossfire and switch to compute mode. |
|
|
|
|
doktor83
|
|
July 16, 2018, 07:34:33 PM |
|
Can someone with 550 and 560 cards tell me which config is the best for V7 and Heavy ?
|
|
|
|
abg00
Newbie
Offline
Activity: 109
Merit: 0
|
|
July 16, 2018, 08:05:49 PM |
|
Can someone with 550 and 560 cards tell me which config is the best for V7 and Heavy ?
560 card work poor. not stable rate heavy config for 560\4g "gpu_conf" : [ { "id" : 0, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 1, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 2, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 3, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 4, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 5, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 6, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 7, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 8, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 9, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 10, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, { "id" : 11, "intensity" : 26, "double_threads" : true, "persistent_memory" : true}, ] v7 config for 550\2g int 26 for card with monitor "gpu_conf" : [ { "id" : 0, "intensity" : 26, "double_threads" : true}, { "id" : 1, "intensity" : 27, "double_threads" : true}, { "id" : 2, "intensity" : 27, "double_threads" : true}, { "id" : 3, "intensity" : 27, "double_threads" : true}, { "id" : 4, "intensity" : 27, "double_threads" : true}, { "id" : 5, "intensity" : 27, "double_threads" : true}, { "id" : 6, "intensity" : 27, "double_threads" : true}, { "id" : 7, "intensity" : 27, "double_threads" : true}, ] |
|
|
|
|
dov17
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 16, 2018, 08:20:27 PM |
|
Can someone with 550 and 560 cards tell me which config is the best for V7 and Heavy ?
RX552 FAST { "id" : 0, "intensity" : 21.5, "worksize" : 12, "threads" : 2} HEAVY/BITTUBE { "id" : 0, "intensity" : 14, "worksize" : 12, "threads" : 2} Normal V7 { "id" : 0, "intensity" : 27.5, "worksize" : 12, "threads" : 2} litev7 { "id" : 0, "intensity" : 45, "worksize" : 12, "threads" : 2} |
|
|
|
|
|
doktor83
|
|
July 16, 2018, 08:24:28 PM |
|
Can someone with 550 and 560 cards tell me which config is the best for V7 and Heavy ?
RX552 FAST { "id" : 0, "intensity" : 21.5, "worksize" : 12, "threads" : 2} HEAVY/BITTUBE { "id" : 0, "intensity" : 14, "worksize" : 12, "threads" : 2} Normal V7 { "id" : 0, "intensity" : 27.5, "worksize" : 12, "threads" : 2} litev7 { "id" : 0, "intensity" : 45, "worksize" : 12, "threads" : 2} Thanks, could you tell me the hashrate too? |
|
|
|
|
