|
doktor83 (OP)
|
 |
July 18, 2018, 04:43:32 AM |
|
plz support HYCON mining,THX! I missed your previous post, sorry. I will look into it. edit : it's cryptonight v7, so you can use 'normalv7' to mine it. It's V7 fork, something modified,normal V7 miner can not work,the modified xmrig miner work fine,but...i like SRBminer more  +1 I checked it its not just the algo, it has a lot custom modifications. So sorry, but you will have to use their miner  |
|
|
|
|
|
|
|
|
Bitcoin addresses contain a checksum, so it is very unlikely that mistyping an address will cause you to lose money.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
ipe4enko
Newbie
 Offline
Activity: 34
Merit: 0
|
|
July 18, 2018, 07:13:10 AM |
|
doktor83
v7 algo
505 H/s 1215/1945 Gygabyte Rx550 (Hynix) Video driver version: 24.20.11001.5003
505 H/s 1215/1900 Asus Rx550 (Elpida) Video driver version: 24.20.11001.5003
495 H/s 1215-1230/1900-1935 MSI Low Profile Rx550 (Hynix ) Video driver version: 23.20.16.4944
"intensity" : 26.7, "worksize" : 12, "threads" : 2
If i add fragments=338033747 in config when speed up about +10 H/s
with new srb version 1.6.4 have you try mix rx550 with other series like rx460 or rx560 can it run properly ? No, i'm not try. |
|
|
|
|
justoiurii
Newbie
Offline
Activity: 103
Merit: 0
|
|
July 18, 2018, 07:30:39 AM |
|
plz support HYCON mining,THX! Have you tried amd mining Hycon with SRB miner? Right now it's possible only with cpu on official pool https://minehycon.com |
|
|
|
|
|
doktor83 (OP)
|
|
July 18, 2018, 09:16:15 AM |
|
doktor83
v7 algo
505 H/s 1215/1945 Gygabyte Rx550 (Hynix) Video driver version: 24.20.11001.5003
505 H/s 1215/1900 Asus Rx550 (Elpida) Video driver version: 24.20.11001.5003
495 H/s 1215-1230/1900-1935 MSI Low Profile Rx550 (Hynix ) Video driver version: 23.20.16.4944
"intensity" : 26.7, "worksize" : 12, "threads" : 2
If i add fragments=338033747 in config when speed up about +10 H/s
with new srb version 1.6.4 have you try mix rx550 with other series like rx460 or rx560 can it run properly ? No, i'm not try. ok thx for your attention, i just want to know why my rig error since use srb v1.6.1-1.6.4 just for miner old algo like cnv7, cnltv7, cnh with manual gpu_config 😂 What is the error you get? |
|
|
|
Raiz83
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 18, 2018, 12:09:53 PM |
|
doktor83
v7 algo
505 H/s 1215/1945 Gygabyte Rx550 (Hynix) Video driver version: 24.20.11001.5003
505 H/s 1215/1900 Asus Rx550 (Elpida) Video driver version: 24.20.11001.5003
495 H/s 1215-1230/1900-1935 MSI Low Profile Rx550 (Hynix ) Video driver version: 23.20.16.4944
"intensity" : 26.7, "worksize" : 12, "threads" : 2
If i add fragments=338033747 in config when speed up about +10 H/s
Those are some really good settings for RX550's! I was messing around with XMRSTAK but I couldn't get them any higher than 410-420 each. Now with SRB and these settings they're all somewhere near 460 Free extra speed. Thanks! |
|
|
|
|
Amigo9881
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 18, 2018, 01:52:47 PM |
|
Can someone show their bittube pool.txt file and config file with vega setup
Thanks
|
|
|
|
|
chris718
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 18, 2018, 02:01:47 PM |
|
plz support HYCON mining,THX! Have you tried amd mining Hycon with SRB miner? Right now it's possible only with cpu on official pool https://minehycon.comI mined with GPUs about 40 days! |
|
|
|
|
|
doktor83 (OP)
|
|
July 18, 2018, 03:31:17 PM |
|
Can someone show their bittube pool.txt file and config file with vega setup
Thanks
Config.txt : {
"min_rig_speed" : 1850
}In .bat put: SRBMiner-CN.exe --ccryptonighttype bittubev2 --cgpuid 0 --cgpuintensity 56 --cgputhreads 2 --cpool mining.bit.tube:13333 --cwallet your-wallet-hereThis is for 1 Vega gpu |
|
|
|
fellowbeing
Newbie
Offline
Activity: 15
Merit: 0
|
|
July 18, 2018, 06:16:52 PM |
|
I managed to get the 18.6.1 driver work on my Vega FE rig so SRB Miner 1.6.4 has become effective. getting a somewhat stable 11060 H/s now... I will post detailed information about this later.
|
|
|
|
|
|
doktor83 (OP)
|
|
July 18, 2018, 06:32:25 PM |
|
I managed to get the 18.6.1 driver work on my Vega FE rig so SRB Miner 1.6.4 has become effective. getting a somewhat stable 11060 H/s now... I will post detailed information about this later.
18.6.1 or 18.3.4 work best on vegas, depending what algo you want to use |
|
|
|
|
Elder III
|
|
July 18, 2018, 07:51:00 PM |
|
I managed to get the 18.6.1 driver work on my Vega FE rig so SRB Miner 1.6.4 has become effective. getting a somewhat stable 11060 H/s now... I will post detailed information about this later.
18.6.1 or 18.3.4 work best on vegas, depending what algo you want to use Which one would you recommend for Vega 56 on CN Heavy? We have a few Vegas sitting in a box that are about to go into a rig soon and I'm trying to decide what we will be mining with them. |
|
|
|
|
|
doktor83 (OP)
|
|
July 18, 2018, 07:52:48 PM |
|
I managed to get the 18.6.1 driver work on my Vega FE rig so SRB Miner 1.6.4 has become effective. getting a somewhat stable 11060 H/s now... I will post detailed information about this later.
18.6.1 or 18.3.4 work best on vegas, depending what algo you want to use Which one would you recommend for Vega 56 on CN Heavy? We have a few Vegas sitting in a box that are about to go into a rig soon and I'm trying to decide what we will be mining with them. if you want to mine Heavy algos, use Adrenaline 18.3.4 |
|
|
|
|
doktor83 (OP)
|
|
July 18, 2018, 08:25:16 PM |
|
Some results & settings on Vega56 8G Hynix mem Bittubev2 Cnv7 |
|
|
|
|
Elder III
|
|
July 18, 2018, 08:35:46 PM |
|
Those look like nice results to me, both on BitTube and Cryptonight V7. Thanks for sharing the screenshots of OverdriveNTool too, that has become our go to software for editing AMD GPU configurations.
|
|
|
|
|
|
WhyMe
|
|
July 19, 2018, 12:23:29 AM |
|
Some results & settings on Vega56 8G Hynix mem Bittubev2Cnv7Hoho, v1.6.5 is coming !? Just testing an RX460 2GB Cores unlocked Samsung memory Core @1180 Mem @2000 Drivers 18.3.2 v7: 1T=130 2T=360 Heavy: 1T=220 2T=244 TUBE: 1T=217 2T=240 FAST: 1T=320 2T=970 Seems to be correct values ? |
|
|
|
|
popow_sergei
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 19, 2018, 06:45:33 AM
Last edit: July 19, 2018, 07:06:51 AM by popow_sergei |
|
[2018-07-19 09:38:10] Miner version: 1.6.4
[2018-07-19 09:38:10] Windows version: 10.0 build 16299
[2018-07-19 09:38:10] Video driver version: 22.19.659.0
[2018-07-19 09:38:11] AMD Platform ID: 1
[2018-07-19 09:38:11] AMD platform FOUND
[2018-07-19 09:38:11] Found 6 AMD devices
[2018-07-19 09:38:11] CPU AES-NI: TRUE
[2018-07-19 09:38:11] GPU0: 687F:C3 [gfx901] [8176 MB][Intensity 112.0][W: 16][T: 2][K: 1][BUS: 19]
[2018-07-19 09:38:11] GPU1: 687F:C3 [gfx901] [8176 MB][Intensity 112.0][W: 16][T: 2][K: 1][BUS: 10]
[2018-07-19 09:38:11] GPU2: 687F:C3 [gfx901] [8176 MB][Intensity 112.0][W: 16][T: 2][K: 1][BUS: 13]
[2018-07-19 09:38:11] GPU3: 687F:C3 [gfx901] [8176 MB][Intensity 112.0][W: 16][T: 2][K: 1][BUS: 7]
[2018-07-19 09:38:11] GPU4: 687F:C3 [gfx901] [8176 MB][Intensity 112.0][W: 16][T: 2][K: 1][BUS: 16]
[2018-07-19 09:38:11] GPU5: 687F:C3 [gfx901] [8176 MB][Intensity 112.0][W: 16][T: 2][K: 1][BUS: 3]
[2018-07-19 09:38:39] ADL is enabled
[2018-07-19 09:38:39] CryptonightV7 mode enabled
[2018-07-19 09:38:39] DevFee pool SET
[2018-07-19 09:38:39] DevFee address SET
[2018-07-19 09:38:39] Starting init of mining threads
[2018-07-19 09:38:39] Error CL_OUT_OF_HOST_MEMORY when creating clCreateCommandQueue for DeviceID 0 (Thread 0)
[2018-07-19 09:38:39] Error initing GPU's. Stopping miner process
[2018-07-19 09:38:39] Stopping miner process
{
"cryptonight_type" : "normalv7",
"intensity" : 112,
"double_threads" : true,
"worksize" : 16,
"reboot_script" : "reboot_script.bat",
"restart_devices_on_startup" : true,
"restart_devices_on_startup_script" : "restart_devices_on_startup_script.bat",
"min_rig_speed" : 11500,
"api_enabled" : true,
"api_rig_name" : "PC_VEGA1",
"api_port" : 21555,
"target_temperature" : 75,
"shutdown_temperature" : 90,
/*"persistent_memory" : true,*/
/**/
/* THERE ARE A LOT OF OPTIONS/PARAMETERS YOU CAN USE HERE */
/* YOU CAN FIND THEM IN THE README FILE */
}
{
"pools" :
[
{"pool" : "monero.pool-moscow.ru:8888", "wallet" : "41nujo2JithhQHT4yQMDaf3iSJtuHfkrodNXwvki7dxCXqiqBQTsy6i4TRkrkGARAFAjaoCsUsV5DK5xoC34PFw7D6ExWMbp+71340", "password" : "PC_VEGA1:lev6@mail.ru"},
{"pool" : "pool.miners.pro:3335", "wallet" : "41nujo2JithhQHT4yQMDaf3iSJtuHfkrodNXwvki7dxCXqiqBQTsy6i4TRkrkGARAFAjaoCsUsV5DK5xoC34PFw7D6ExWMbp+71340", "password" : "PC_VEGA1:lev6@mail.ru"}
]
}
? 1.6.4 [2018-07-19 09:48:11] stats: HW error: BUS_ID_16: 1 [2018-07-19 09:48:11] stats: HW error: BUS_ID_13: 1 ? 1,4,9 ok 1.4.9 more issues than 1.6.4 11700 11556 H/s 1.6.4 pours errors [2018-07-19 09:58:16] stats: Average time to find share: 8 seconds [2018-07-19 09:58:16] stats: HW error: BUS_ID_16: 2 [2018-07-19 09:58:16] stats: HW error: BUS_ID_7: 1 [2018-07-19 09:58:16] stats: HW error: BUS_ID_10: 1 [2018-07-19 09:58:16] stats: HW error: BUS_ID_3: 2 1,6,4 ------------------------------------------------------- [2018-07-19 10:00:41] GPU0 : 1923 H/s [T: 62c, RPM: 3674, CC: 1212 MHz, MC: 905 MHz][BUS:19] [2018-07-19 10:00:41] GPU1 : 1925 H/s [T: 65c, RPM: 3678, CC: 1212 MHz, MC: 905 MHz][BUS:10] [2018-07-19 10:00:41] GPU2 : 1908 H/s [T: 60c, RPM: 3668, CC: 1212 MHz, MC: 905 MHz][BUS:13] [2018-07-19 10:00:41] GPU3 : 1936 H/s [T: 65c, RPM: 3677, CC: 1212 MHz, MC: 905 MHz][BUS:7] [2018-07-19 10:00:41] GPU4 : 1917 H/s [T: 64c, RPM: 3676, CC: 1212 MHz, MC: 905 MHz][BUS:16] [2018-07-19 10:00:41] GPU5 : 1919 H/s [T: 57c, RPM: 3547, CC: 1212 MHz, MC: 905 MHz][BUS:3] [2018-07-19 10:00:41] Total: 11528 H/s 1,4,9 [2018-07-19 10:03:12] GPU0: 1951.0 H/S [T: 56c, RPM: 4529, CC: 1212 MHz, MC: 905 MHz] [2018-07-19 10:03:12] GPU1: 1950.0 H/S [T: 58c, RPM: 4754, CC: 1212 MHz, MC: 905 MHz] [2018-07-19 10:03:12] GPU2: 1932.0 H/S [T: 56c, RPM: 4475, CC: 1212 MHz, MC: 905 MHz] [2018-07-19 10:03:12] GPU3: 1961.0 H/S [T: 59c, RPM: 4571, CC: 1212 MHz, MC: 905 MHz] [2018-07-19 10:03:12] GPU4: 1945.0 H/S [T: 59c, RPM: 4557, CC: 1212 MHz, MC: 905 MHz] [2018-07-19 10:03:12] GPU5: 1945.0 H/S [T: 53c, RPM: 4434, CC: 1212 MHz, MC: 905 MHz] [2018-07-19 10:03:12] Total: 11684.0 H/S |
|
|
|
|
popow_sergei
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 19, 2018, 07:28:02 AM |
|
[2018-07-19 10:23:01] Starting init of mining threads
[2018-07-19 10:23:01] Error CL_OUT_OF_HOST_MEMORY when creating clCreateCommandQueue for DeviceID 0 (Thread 0)
[2018-07-19 10:23:01] Error initing GPU's. Stopping miner process
[2018-07-19 10:23:01] Stopping miner process
guilty
"restart_devices_on_startup" : true,
"restart_devices_on_startup_script" : "restart_devices_on_startup_script.bat",
restart_devices_on_startup_script.bat
OverdriveNTool.exe -r1 -r2 -r3 -r4 -r5 -r6 -p1Vega56 -p2Vega56 -p3Vega56 -p4Vega56 -p5Vega56 -p6Vega56
|
|
|
|
|
fellowbeing
Newbie
Offline
Activity: 15
Merit: 0
|
|
July 19, 2018, 07:43:47 AM |
|
With SRB Miner 1.6.4, my Vega FE rig is currently doing a stable 11060 H/s. Each Vega FE gives a minimum 2205 H/s and a maximum of 2222 H/s, each card is slightly different as you know. Now the temperatures are between 58 and 60 C, only one card rarely goes to 61 C and then gets back! So I think this is pretty cool. I set memory clock of 1100 MHz and memory voltage of 810 mV for all of them. I set slightly varying core clocks however as each one behaves slightly different but generally it is in the range of 1502-1552 MHz and core voltage of 950-1000 mV. Using OverDrive when I had Blockchain drivers, I could set core clock to 1600 MHz and core voltage to 890 mV which is weird, memory was 1100 MHz along with 880 mV, this would get me 10910 H/s (even with SRB Miner 1.4.  with slightly higher (extra ~5 C) temperatures. So I'm not sure if the rig is consuming more power now than before, but extra 160 H/s must be mostly related to SRB Miner 1.6.4 and the new drivers. I also noticed fan readings are jumpy at times both in the WattMan and the SRB Miner so this must be sensor readings from the driver or maybe really the fans are aging already. These hashrates that I've mentioned are for CN7 only. Thanks for the great Miner! I think some extra features may be handy and will dig it later. |
|
|
|
|
|
doktor83 (OP)
|
|
July 19, 2018, 07:59:30 AM |
|
1.6.4 pours errors
[2018-07-19 09:58:16] stats: Average time to find share: 8 seconds
[2018-07-19 09:58:16] stats: HW error: BUS_ID_16: 2
[2018-07-19 09:58:16] stats: HW error: BUS_ID_7: 1
[2018-07-19 09:58:16] stats: HW error: BUS_ID_10: 1
[2018-07-19 09:58:16] stats: HW error: BUS_ID_3: 2
1,6,4
-------------------------------------------------------
[2018-07-19 10:00:41] GPU0 : 1923 H/s [T: 62c, RPM: 3674, CC: 1212 MHz, MC: 905 MHz][BUS:19]
[2018-07-19 10:00:41] GPU1 : 1925 H/s [T: 65c, RPM: 3678, CC: 1212 MHz, MC: 905 MHz][BUS:10]
[2018-07-19 10:00:41] GPU2 : 1908 H/s [T: 60c, RPM: 3668, CC: 1212 MHz, MC: 905 MHz][BUS:13]
[2018-07-19 10:00:41] GPU3 : 1936 H/s [T: 65c, RPM: 3677, CC: 1212 MHz, MC: 905 MHz][BUS:7]
[2018-07-19 10:00:41] GPU4 : 1917 H/s [T: 64c, RPM: 3676, CC: 1212 MHz, MC: 905 MHz][BUS:16]
[2018-07-19 10:00:41] GPU5 : 1919 H/s [T: 57c, RPM: 3547, CC: 1212 MHz, MC: 905 MHz][BUS:3]
[2018-07-19 10:00:41] Total: 11528 H/s
1,4,9
[2018-07-19 10:03:12] GPU0: 1951.0 H/S [T: 56c, RPM: 4529, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU1: 1950.0 H/S [T: 58c, RPM: 4754, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU2: 1932.0 H/S [T: 56c, RPM: 4475, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU3: 1961.0 H/S [T: 59c, RPM: 4571, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU4: 1945.0 H/S [T: 59c, RPM: 4557, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU5: 1945.0 H/S [T: 53c, RPM: 4434, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] Total: 11684.0 H/S
Its time to change the good old blockchain drivers to 18.3.4 or 18.6.1 |
|
|
|
popow_sergei
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 19, 2018, 08:03:35 AM |
|
1.6.4 pours errors
[2018-07-19 09:58:16] stats: Average time to find share: 8 seconds
[2018-07-19 09:58:16] stats: HW error: BUS_ID_16: 2
[2018-07-19 09:58:16] stats: HW error: BUS_ID_7: 1
[2018-07-19 09:58:16] stats: HW error: BUS_ID_10: 1
[2018-07-19 09:58:16] stats: HW error: BUS_ID_3: 2
1,6,4
-------------------------------------------------------
[2018-07-19 10:00:41] GPU0 : 1923 H/s [T: 62c, RPM: 3674, CC: 1212 MHz, MC: 905 MHz][BUS:19]
[2018-07-19 10:00:41] GPU1 : 1925 H/s [T: 65c, RPM: 3678, CC: 1212 MHz, MC: 905 MHz][BUS:10]
[2018-07-19 10:00:41] GPU2 : 1908 H/s [T: 60c, RPM: 3668, CC: 1212 MHz, MC: 905 MHz][BUS:13]
[2018-07-19 10:00:41] GPU3 : 1936 H/s [T: 65c, RPM: 3677, CC: 1212 MHz, MC: 905 MHz][BUS:7]
[2018-07-19 10:00:41] GPU4 : 1917 H/s [T: 64c, RPM: 3676, CC: 1212 MHz, MC: 905 MHz][BUS:16]
[2018-07-19 10:00:41] GPU5 : 1919 H/s [T: 57c, RPM: 3547, CC: 1212 MHz, MC: 905 MHz][BUS:3]
[2018-07-19 10:00:41] Total: 11528 H/s
1,4,9
[2018-07-19 10:03:12] GPU0: 1951.0 H/S [T: 56c, RPM: 4529, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU1: 1950.0 H/S [T: 58c, RPM: 4754, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU2: 1932.0 H/S [T: 56c, RPM: 4475, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU3: 1961.0 H/S [T: 59c, RPM: 4571, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU4: 1945.0 H/S [T: 59c, RPM: 4557, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] GPU5: 1945.0 H/S [T: 53c, RPM: 4434, CC: 1212 MHz, MC: 905 MHz]
[2018-07-19 10:03:12] Total: 11684.0 H/S
Its time to change the good old blockchain drivers to 18.3.4 or 18.6.1 what's the latest working on blockchain ? |
|
|
|
|
|
