SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[zeef]

Hi doc, when can we update for new amd drivers? 

Thanks

[1714118850]

1714118850

[1714118850]

1714118850

[TigTex]

Hello

I've been testing this on my 5x rx580 4gb (elpida) and so far so good
I'm having minor instability issues at 1230/2020mhz @ 915mv producing 930H/s for each card. I have some random restarts but i'll try to lower more the clock speed if this repeats. Mining eth was stable with much faster speeds, but it's a different algorithm so this is expected.
If you just started mining, make sure that you tweak the intensity setting. Using "58" instead of "55" for normalv7 algorithm improved my hashrate a bit.


Question @ admin
Is it possible to add the "api" configuration to the command line options instead of config.txt files? Because if you use multialgo switch, you have to configure the API settings on every config file.
Also, since you have ADL api enabled, can you provide a way to change the gpu/mem clock/voltage in your miner?

[melloyellow]

Dok, on one of my rigs I get this error

Error:
Description = Not found

It still tries to start mining but usually just closes.


Also, I get the warning that I'm not using the recommended drivers even though I'm on 18.6.1.  Just to be sure I DDU'ed and reinstalled 18.6.1, same warning.

I would post a log but it just crashed and I'm not on location.  My log files aren't formatted correctly for some reason

It is hard to help without any logs..
Also when you press 's' while mining it should show :
Driver version: 24.20.11021.1000

That is 18.6.1 driver

Also if you open the log in notepad++ it will be formated ok

After pressing 's' I get:

Driver: Unknown

Here's a screenshot with the 'Description = Not Found' error two times.

https://imgur.com/a/loJgaUv

and here's part of the log:

Code:

[2018-09-07 10:14:15] Miner version: 1.6.7
[2018-09-07 10:14:15] Windows version: 10.0 build 15063
[2018-09-07 10:14:15] Video driver version: unknown
[2018-09-07 10:14:21] AMD Platform ID: 0
[2018-09-07 10:14:21] AMD platform FOUND
[2018-09-07 10:14:21] Found 5 AMD devices
[2018-09-07 10:14:21] config_parse: You used a non-existing gpu id 6, ignoring it.
[2018-09-07 10:14:21] CPU AES-NI: FALSE
[2018-09-07 10:14:21] GPU0: AMD Radeon R9 200 Series [Hawaii] [4096 MB][Intensity 42.0][W: 8][T: 2][K: 2][BUS: 2]
[2018-09-07 10:14:21] GPU1: AMD Radeon R9 200 Series [Hawaii] [4096 MB][Intensity 42.0][W: 8][T: 2][K: 2][BUS: 3]
[2018-09-07 10:14:21] GPU2: AMD Radeon R9 200 Series [Hawaii] [4096 MB][Intensity 42.0][W: 8][T: 2][K: 2][BUS: 5]
[2018-09-07 10:14:21] GPU3: AMD Radeon R9 200 Series [Hawaii] [4096 MB][Intensity 42.0][W: 8][T: 2][K: 2][BUS: 6]
[2018-09-07 10:14:21] GPU4: AMD Radeon R9 200 Series [Hawaii] [4096 MB][Intensity 42.0][W: 8][T: 2][K: 2][BUS: 7]
[2018-09-07 10:14:21] ADL is enabled
[2018-09-07 10:14:21] You are not using the recommended Adrenalin 18.6.1 or 18.3.4 driver, hashing speed can be decreased.
[2018-09-07 10:14:21] CryptonightV7 mode enabled
[2018-09-07 10:14:21] DevFee pool SET
[2018-09-07 10:14:21] DevFee address SET
[2018-09-07 10:14:21] Starting init of mining threads
[2018-09-07 10:14:21] Loading compiled kernel for DEVICE BUS ID 2 ...
[2018-09-07 10:14:22] Loading compiled kernel for DEVICE BUS ID 2 ...
[2018-09-07 10:14:24] Loading compiled kernel for DEVICE BUS ID 3 ...
[2018-09-07 10:14:25] Loading compiled kernel for DEVICE BUS ID 3 ...
[2018-09-07 10:14:26] Loading compiled kernel for DEVICE BUS ID 5 ...
[2018-09-07 10:14:27] Loading compiled kernel for DEVICE BUS ID 5 ...
[2018-09-07 10:14:29] Loading compiled kernel for DEVICE BUS ID 6 ...
[2018-09-07 10:14:30] Loading compiled kernel for DEVICE BUS ID 6 ...
[2018-09-07 10:14:31] Loading compiled kernel for DEVICE BUS ID 7 ...
[2018-09-07 10:14:32] Loading compiled kernel for DEVICE BUS ID 7 ...
[2018-09-07 10:14:34] ADL initialised successfully!
[2018-09-07 10:14:34] Finished init of mining threads
[2018-09-07 10:14:34] Main pool: us-east.cryptonight-hub.miningpoolhub.com:17024
[2018-09-07 10:14:34] Gpu watchdog started
[2018-09-07 10:14:34] API enabled on port hello
[2018-09-07 10:14:34] json_send: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"hello.hello","pass":"hello","agent":"SRBMiner Cryptonight AMD GPU miner/1.6.7","rigid":""}}
[2018-09-07 10:14:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"779690729686990","job":{"blob":"0707b2aacadc05756012eda1ab3ddb6407343bbe95530f6f0e3771a42fa2028ac0acc6f1461dd700000000f5dd0e6c02be4ffb81af8e104589bcc09cb6262c1966e545e5675e4255d7ad6d04","job_id":"131939069367945","target":"8d210000"},"status":"OK"}}
[2018-09-07 10:14:35] Connected to us-east.cryptonight-hub.miningpoolhub.com:17024
[2018-09-07 10:14:35] sock_ready: User logged in
[2018-09-07 10:14:35] pool_have_job: Pool sent a new job (ID: 131939069367945)
[2018-09-07 10:14:35] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0707acaacadc05756012eda1ab3ddb6407343bbe95530f6f0e3771a42fa2028ac0acc6f1461dd7000000009fa6e1bce9ab0b51d4786671d1ea1b0e23ba43828bedac7776602e860b676c9603","job_id":"391875587985850","target":"6ea30100"}}
[2018-09-07 10:14:35] pool_have_job: Pool sent a new job (ID: 391875587985850)
[2018-09-07 10:14:42] miner_result: Sending user result to pool
[2018-09-07 10:14:42] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"779690729686990","job_id":"391875587985850","nonce":"2ed3cccc","result":"49c4b7802cc58f36eaa7ac3328d5bf95dd3599726f345ef7d1ce04c1e8aa0000"}}
[2018-09-07 10:14:42] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-09-07 10:14:42] miner_result: Pool accepted result 0x0000AAE8
[2018-09-07 10:15:04] miner_result: Sending user result to pool
[2018-09-07 10:15:04] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"779690729686990","job_id":"391875587985850","nonce":"31c29999","result":"11160eb49adfa9a0a33c3888ef523787c09ecdde46d3cf23a8b5dbf597340100"}}
[2018-09-07 10:15:04] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-09-07 10:15:04] miner_result: Pool accepted result 0x00013497
[2018-09-07 10:15:06] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0707fbabcadc0576fea794e8ce7b80def3d60ef2d8963a069ba8da4468d33d651738a4ab74082b000000000c1deacc747c4b070bfb24941ecb70b0d76bd2bc9e4c5dca515f6b8c5297d4a702","job_id":"937356822588481","target":"6ea30100"}}
[2018-09-07 10:15:06] pool_have_job: Pool sent a new job (ID: 937356822588481)
[2018-09-07 10:15:06] DFP online load: SUCCESS
[2018-09-07 10:15:06] DevFee pool SET
[2018-09-07 10:15:06] DevFee address SET

I get the config parse warning because I think a riser became loose.  I'm not on location so don't know for sure.  The card may have gone up in a poof of smoke for all I know.

[livada]

how is config for nicehash
cryptonightv7.eu.nicehash.com:33363 ??
always get . user cant log in

where to put nicehash true ? pool.txt or where ?

for v7 {"pool_use_tls" : false, "pool" : "cryptonightv7.eu.nicehash.com:3363", "wallet" : "adres.namerig1", "password" : "x", "nicehash" : true, "max_difficulty" : 1700000},

for heavy    {"pool_use_tls" : false, "pool" : "cryptonightv7.eu.nicehash.com:3364", "wallet" : "adres.namerig2", "password" : "x", "nicehash" : true, "max_difficulty" : 1700000},

[Maximizum]

Hello, I am looking for some help setting up Vega FE, any experts here? My hashrate is only 1.2k and my temps are over 80. I am mining heavy algo and I've tried 18.6.4 driver and 18.5.1 driver.

I have so many questions! Example: is there crossfire that I should disable? Nothing is showing up in amd settings.

Also afterburner can't change fan speed or reduce power. Overdriventool gave an error when I tried to change max temp too.

I am lost.

Read post #3 in this thread.  What isn’t answered there can be found here...http://vega.miningguides.com/

Thank you for the response. I am using those resources! My biggest problem is that I can't control the fan or power the way I can on my other cards (rx) - Afterburner doesn't work and Overdriventool is also giving error messages.

I currently have driver 18.5.1 installed but I will put on a newer one and try it. I'll also try the tweaks in step 3 to try to raise my hashrate, currently 1.3k on heavy.

Boпpoc peшён, cнaчaлa ycтaнaвливaeм пpoф дpaйвep 18g2(в pигe oднa кapтa и вcтpoйкa), пpи ycтaнoвкe дpoв выбиpaeм чиcтyю ycтaнoвкy либo ddu>выбopoчнaя ycтaнoвкa>Switch mod enable> Пepeзaгpyжaeм> зaxoдим в paдeoн ceттингc> нacтpoйкa дpaйвepa(нижняя лeвaя вклaдкa)> пpoвepяeм нaличиe нoвoгo дpaйвepa>пepeключaeм-ycтaнaвливaeм игpoвoй дpaйвep>выключaeм pиг> извлeкaeм тeкyщyю кapтy> cтaвим cлeдyющyю в cлeдyющий Cлoт.И тaк co вceми кapтaми.Ecли пocтaвить cpaзy вce кapты, вклaдки нacтpoйкa дpaйвepa в пpилoжeнии нe бyдeт.И дa, paзвeтвитeлe PCI-e нe кaнaют.Srb miner 1.6.0: 130 интeнcивнocть, двa пoтoкa,2100н/s normalv7, cast xmr, интeнcивнocть 12,--loadlargepage=on,2080 h/s нa heavy c иcпoльзoвaниeм вceй пaмяти кapты(16gb) pp_table cмoтpитe y GEEK MARK нa ютyб.

[UnclWish]

Hello, I am looking for some help setting up Vega FE, any experts here? My hashrate is only 1.2k and my temps are over 80. I am mining heavy algo and I've tried 18.6.4 driver and 18.5.1 driver.

I have so many questions! Example: is there crossfire that I should disable? Nothing is showing up in amd settings.

Also afterburner can't change fan speed or reduce power. Overdriventool gave an error when I tried to change max temp too.

I am lost.

Read post #3 in this thread.  What isn’t answered there can be found here...http://vega.miningguides.com/

Thank you for the response. I am using those resources! My biggest problem is that I can't control the fan or power the way I can on my other cards (rx) - Afterburner doesn't work and Overdriventool is also giving error messages.

I currently have driver 18.5.1 installed but I will put on a newer one and try it. I'll also try the tweaks in step 3 to try to raise my hashrate, currently 1.3k on heavy.

Boпpoc peшён, cнaчaлa ycтaнaвливaeм пpoф дpaйвep 18g2(в pигe oднa кapтa и вcтpoйкa), пpи ycтaнoвкe дpoв выбиpaeм чиcтyю ycтaнoвкy либo ddu>выбopoчнaя ycтaнoвкa>Switch mod enable> Пepeзaгpyжaeм> зaxoдим в paдeoн ceттингc> нacтpoйкa дpaйвepa(нижняя лeвaя вклaдкa)> пpoвepяeм нaличиe нoвoгo дpaйвepa>пepeключaeм-ycтaнaвливaeм игpoвoй дpaйвep>выключaeм pиг> извлeкaeм тeкyщyю кapтy> cтaвим cлeдyющyю в cлeдyющий Cлoт.И тaк co вceми кapтaми.Ecли пocтaвить cpaзy вce кapты, вклaдки нacтpoйкa дpaйвepa в пpилoжeнии нe бyдeт.И дa, paзвeтвитeлe PCI-e нe кaнaют.Srb miner 1.6.0: 130 интeнcивнocть, двa пoтoкa,2100н/s normalv7, cast xmr, интeнcивнocть 12,--loadlargepage=on,2080 h/s нa heavy c иcпoльзoвaниeм вceй пaмяти кapты(16gb) pp_table cмoтpитe y GEEK MARK нa ютyб.

A ничe, чтo тyт aнглийcкий фopyм. He cмyщaeт? He?

[dingdongtobias]

I think you may be the only one still struggling with this 

I guess I am not alone after all.

Anyway, the bug is back on two of the rigs.  Same story, others are fine.  Really weird.

That 2 newbie user is both you, pretend to be some else.
Using srb from ver1 i never have this problem in 6 month period, because no firewall instaled on rig, defender disablet and so on.
Different rig locations, different internets, and never have this problem.

[Ultrasonik]

Successful test with 18.8.1 drivers, SRB 1.6.7 and old BinaryKernels from 1.6.7.
V7 speed is excellent...

I have the same speed with bc driver but with less power for 6 GPU RX480: 650w vs 750w))) And of course, with the red warning about not adrenalin drivers)))

I not have the same speed   on rx470  (modded bios, driver recomended version   1150 mhz gpu/2225 mem) V7   
 1.6.6  ~  905 H/s
 1.6.7  ~  880 H/s 

and after the launch of 1.6.7 with a shit speed of 880 it is necessary to full reboot PC  so that 1.6.6 starts to recover again >900
 

[StartNays]

hello, tell me please function autostart is?

[dingdongtobias]

I think you may be the only one still struggling with this 

I guess I am not alone after all.

Anyway, the bug is back on two of the rigs.  Same story, others are fine.  Really weird.

That 2 newbie user is both you, pretend to be some else.
Using srb from ver1 i never have this problem in 6 month period, because no firewall instaled on rig, defender disablet and so on.
Different rig locations, different internets, and never have this problem.

Yeah, right, sure.  Uh, thanks for your *expert* analysis.  To quote the Dok, "Don't be a dick."

You only trolling here, you even not using srb : https://bitcointalk.org/index.php?topic=3281187.msg42654322#msg42654322, https://bitcointalk.org/index.php?topic=3269535.msg43644432#msg43644432

go troll somwhere else

[bucah]

Hello doktor,

I am just notice that the total mining time will back to zero when the miner auto restart caused by "min_rig_speed" parameter.

Please fix it on the next update.

[hunghcm]

my rig have one GPU reduce speed 0 hash/s, i have to use script 'reboot"

How i can find this GPU's position exactly to fix (i used the commant re_order already)

Thanks

[dingdongtobias]

I think you may be the only one still struggling with this 

I guess I am not alone after all.

Anyway, the bug is back on two of the rigs.  Same story, others are fine.  Really weird.

That 2 newbie user is both you, pretend to be some else.
Using srb from ver1 i never have this problem in 6 month period, because no firewall instaled on rig, defender disablet and so on.
Different rig locations, different internets, and never have this problem.

Yeah, right, sure.  Uh, thanks for your *expert* analysis.  To quote the Dok, "Don't be a dick."

You only trolling here, you even not using srb : https://bitcointalk.org/index.php?topic=3281187.msg42654322#msg42654322, https://bitcointalk.org/index.php?topic=3269535.msg43644432#msg43644432

go troll somwhere else

Oh, wow, you caught me!  Look, I am free to try out and use as many miners as I like.  I quit using the other miner because of the necessity to use Win10.  Many of my rigs are still Win7.  I am not trolling.  I have 30 rigs running SRB right now.  You have accused me of logging onto this forum as another to support my claim.  And now you are accusing me of not even using SRB.  Did you not see the quote of Dok's log that I posted?  That is proof that I use his software.  You, as a sleuth, are a total amateur, and you really should stop embarrassing yourself.

You say what you want i think what i want!
And i think you shady guy. 

[doktor83]

hello, tell me please function autostart is?

What do you mean by autostart?
Create a shortcut in you start folder for the start.bat

[doktor83]

Hello doktor,

I am just notice that the total mining time will back to zero when the miner auto restart caused by "min_rig_speed" parameter.

Please fix it on the next update.

Of course it will go back to zero, because miner restarted, it's just like if you closed the miner and started it by hand.

[doktor83]

my rig have one GPU reduce speed 0 hash/s, i have to use script 'reboot"

How i can find this GPU's position exactly to fix (i used the commant re_order already)

Thanks

There is the BUS value that is unique for every card, that is the same number as in OverdriveNTool for example.

[camchimonline]

Dear admin, how to show srbminer monitor for 30 rig?

[StartNays]

hello, tell me please function autostart is?

What do you mean by autostart?
Create a shortcut in you start folder for the start.bat

5 - 6 hours works and turns off

without rebooting the PC

[UnclWish]

Thanks to you're decision... All my rigs needs to adgust fan controls... Some of theme failed bacause of wrong fan setting... What causes problem.. Your miner can track fan speed, but can't change speed...
I think, that if you want make normal WD, you must look at all variations of speed of fan... Threre is no safe situation, if you implement for watchdog, you must think about all situations...

[ipp2]

Thanks to you're decision... All my rigs needs to adgust fan controls... Some of theme failed bacause of wrong fan setting... What causes problem.. Your miner can track fan speed, but can't change speed...
I think, that if you want make normal WD, you must look at all variations of speed of fan... Threre is no safe situation, if you implement for watchdog, you must think about all situations...

use afterburner and shutup.