SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

to Mahaprajapati - nice Dashboard, 

to Doctor83 - small bug: api command "api_rig_name" : IDENTIFIER in config don't work (SrbMiner just close)

have you tried "IDENTIFIER" ?

[1714008680]

1714008680

[abudfv2008]

doktor83
Is there any solution that miner doesn't start after reboot on a rig without vga-emulator/ monitor attached or until rdp session is connected?
Cast-XRM start without problems.

[doktor83]

doktor83
Is there any solution that miner doesn't start after reboot on a rig without vga-emulator/ monitor attached or until rdp session is connected?
Cast-XRM start without problems.

What error do you get?
As far as i know, when a hdmi adapter or monitor needs to be plugged in but its not, it wont boot into windows, so i don't know how does Cast start without windows..

[tvukoman]

to Doctor83 - small bug: api command "api_rig_name" : IDENTIFIER in config don't work (SrbMiner just close)



have you tried "IDENTIFIER" ?

No, why are you asking? ;-)

TXS, readme file confuses me, no " " working of course  

[abudfv2008]

doktor83
Is there any solution that miner doesn't start after reboot on a rig without vga-emulator/ monitor attached or until rdp session is connected?
Cast-XRM start without problems.

What error do you get?
As far as i know, when a hdmi adapter or monitor needs to be plugged in but its not, it wont boot into windows, so i don't know how does Cast start without windows..

No - it's another situation it is hanging on "heating up system..." Here as you can see it was hanging for 4minutes until I connected via RDP. It will hang there for days if I don't connect.

Please wait...

Cryptonight StelliteV4 mode enabled

[2018-09-27 17:06:22] Heating up system, please wait...
[2018-09-27 17:10:09] Loading compiled kernel for DEVICE BUS ID 7 ...
[2018-09-27 17:10:11] Loading compiled kernel for DEVICE BUS ID 7 ...
[2018-09-27 17:10:12] Loading compiled kernel for DEVICE BUS ID 17 ...
[2018-09-27 17:10:13] Loading compiled kernel for DEVICE BUS ID 17 ...
[2018-09-27 17:10:14] Loading compiled kernel for DEVICE BUS ID 14 ...

[tvukoman]

table updated https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

New update of Table. Added 4 cards for V7 algo (3 Vegas and one rx570)

To Doctor83: can you please add link for the hashrate table on the first post, it is great idea and help. I forgot who post it originaly but idea is 5+

[tg88]

what to do?

Increase virtual memory...

[doktor83]

to Doctor83 - small bug: api command "api_rig_name" : IDENTIFIER in config don't work (SrbMiner just close)



have you tried "IDENTIFIER" ?

No, why are you asking? ;-)

TXS, readme file confuses me, no " " working of course  

Still not working?
Post you config.txt please

[doktor83]

table updated https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

New update of Table. Added 4 cards for V7 algo (3 Vegas and one rx570)

To Doctor83: can you please add link for the hashrate table on the first post, it is great idea and help. I forgot who post it originaly but idea is 5+

Yes sir, here it goes to the first page, but please post only settings for SRBMiner, i see someone posted for jce miner too.
Let jce have its own table on his thread.
Also i see almost noone uses the recommended drivers 

[hesido]

table updated https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

New update of Table. Added 4 cards for V7 algo (3 Vegas and one rx570)

To Doctor83: can you please add link for the hashrate table on the first post, it is great idea and help. I forgot who post it originaly but idea is 5+

Yes sir, here it goes to the first page, but please post only settings for SRBMiner, i see someone posted for jce miner too.
Let jce have its own table on his thread.
Also i see almost noone uses the recommended drivers 

18.6.1 increased my power use, lowered the hashrate (in my setup of course) :\ I'm using 18.3.something but it's not the recommended one (probably the one before). At least the first two parts match heheh.

[doktor83]

table updated https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

New update of Table. Added 4 cards for V7 algo (3 Vegas and one rx570)

To Doctor83: can you please add link for the hashrate table on the first post, it is great idea and help. I forgot who post it originaly but idea is 5+

Yes sir, here it goes to the first page, but please post only settings for SRBMiner, i see someone posted for jce miner too.
Let jce have its own table on his thread.
Also i see almost noone uses the recommended drivers 

18.6.1 increased my power use, lowered the hashrate (in my setup of course) :\ I'm using 18.3.something but it's not the recommended one (probably the one before). At least the first two parts match heheh.

Did you let the miner build the kernel on the driver version you use, or using the pre-built binary?

[ysakay]

Hi guys.

I have a problem. " received data is larger than buffer "

How can i fix this?


http://prntscr.com/kzs2ps

[doktor83]

Hi guys.

I have a problem. " received data is larger than buffer "

How can i fix this?


Just use a normal pool. Thats pool related problem

http://prntscr.com/kzs2ps

[hesido]

table updated https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

New update of Table. Added 4 cards for V7 algo (3 Vegas and one rx570)

To Doctor83: can you please add link for the hashrate table on the first post, it is great idea and help. I forgot who post it originaly but idea is 5+

Yes sir, here it goes to the first page, but please post only settings for SRBMiner, i see someone posted for jce miner too.
Let jce have its own table on his thread.
Also i see almost noone uses the recommended drivers 

18.6.1 increased my power use, lowered the hashrate (in my setup of course) :\ I'm using 18.3.something but it's not the recommended one (probably the one before). At least the first two parts match heheh.

Did you let the miner build the kernel on the driver version you use, or using the pre-built binary?

I remember renaming the pre-built binary folder or something along the lines to let it build.

[SmartOdissey]

Very good result with 18.5.2 drivers:
9810-9830 hashes on heaven protocol. No crashes, +10 or -10 hashrate flow.
1st 3cards is rx580-8, last 4cards-vega56 air ref
18.6.1-2 drivers is weird shit, always downhashing.
https://prnt.sc/kzuufi

config miner:
{
"cryptonight_type" : "haven",
"intensity" : 0,
"double_threads" : true,
"min_rig_speed" : 8500,

"gpu_conf" :
[
   { "id" : 0, "intensity" : 58, "worksize" : 8, "threads" : 2},
        { "id" : 1, "intensity" : 58, "worksize" : 8, "threads" : 2},
   { "id" : 2, "intensity" : 58, "worksize" : 8, "threads" : 2},
   { "id" : 3, "intensity" : 61, "worksize" : 9, "threads" : 2},
   { "id" : 4, "intensity" : 61, "worksize" : 9, "threads" : 2},
        { "id" : 5, "intensity" : 61, "worksize" : 9, "threads" : 2},
          { "id" : 6, "intensity" : 61, "worksize" : 9, "threads" : 2}
]
}

config overdriven:

[Profile_0]
Name=Vega56
GPU_P0=852;800
GPU_P1=991;900
GPU_P2=1138;950
GPU_P3=1269;1000
GPU_P4=1312;1050
GPU_P5=1474;1100
GPU_P6=1312;950
GPU_P7=1474;950
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=700;900
Mem_P3=945;950
Fan_Min=3000
Fan_Max=4900
Fan_Target=50
Fan_Acoustic=2400
Power_Temp=55
Power_Target=-10

[Profile_2]
Name=RX580
GPU_P0=300;750
GPU_P1=600;769
GPU_P2=900;887
GPU_P3=1201;1162
GPU_P4=1274;1150
GPU_P5=1318;1150
GPU_P6=1363;1100
GPU_P7=1420;1100
Mem_P0=300;750
Mem_P1=1000;800
Mem_P2=2130;950
Fan_Min=2000
Fan_Max=3500
Fan_Target=55
Fan_Acoustic=2400
Power_Temp=60
Power_Target=-10

[twoxeons]

The miner runs great, but I have one serious problem.  When I close the miner (CTRL-C), it crashes the system (Win10) hard, and I have to manually reboot twice to get things going again.  The same thing happens if I close the window.  Do you think this is a configuration problem or a wonky hardware issue?  Any help is greatly appreciated.

[TeCe]

Doc, greetings!!

I have two questions:

1. Today, faced with a large number of self-closing miner!
Here's the error ...
[2018-09-28 19:43:29] pool_have_job: Pool sent a new job (ID: 343197983146868)
[2018-09-28 19:43:54] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:43:54] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:43:54] devfee: Don't be a dick.
[2018-09-28 19:43:54] Stopping miner process

+

[2018-09-28 19:55:20] pool_have_job: Pool sent a new job (ID: 136675056484402)
[2018-09-28 19:55:52] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:55:52] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:55:52] devfee: Don't be a dick.
[2018-09-28 19:55:52] Stopping miner process
 

 

Doc, can you please explain what it is?
And why do you write "Don't be a dick."  

2. And I noticed that the work for you is 1.5 minutes. Logs i can include if u need!
It's an hour, right? If yes - then your commission is 2.5%, not 0.85 !!!

[doktor83]

Doc, greetings!!

I have two questions:

1. Today, faced with a large number of self-closing miner!
Here's the error ...
[2018-09-28 19:43:29] pool_have_job: Pool sent a new job (ID: 343197983146868)
[2018-09-28 19:43:54] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:43:54] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:43:54] devfee: Don't be a dick.
[2018-09-28 19:43:54] Stopping miner process

+

[2018-09-28 19:55:20] pool_have_job: Pool sent a new job (ID: 136675056484402)
[2018-09-28 19:55:52] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:55:52] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:55:52] devfee: Don't be a dick.
[2018-09-28 19:55:52] Stopping miner process
 

 

Doc, can you please explain what it is?
And why do you write "Don't be a dick."  

2. And I noticed that the work for you is 1.5 minutes. Logs i can include if u need!
It's an hour, right? If yes - then your commission is 2.5%, not 0.85 !!!

check your firewall/antivirus software is not blocking the miner.
For example i had a user report to me that on zone alarm even if he allowed miner connections, sometimes it blocked them.

I have a few rigs running 24h since i begun to develop the miner, on different coins, and never had it trigger the let's call it 'devfee blocking protection' mechanism.
No antivirus, no firewall and defender disabled on all those machines. Some are win7, some are win10.

Fee is 0.85%, not 2.5%
Fee mining period is never more than a minute. Also its calculated so that it is always around 0.85%/24h.

You can freely run a network sniffer to check it out.

[murgorx]

Is anyone having problems with the latest AMD drivers ? I have seen around 5-8% decrease in both CN Heavy and ETH even! Who has upgraded from here?

[TeCe]

Doc, greetings!!

I have two questions:

1. Today, faced with a large number of self-closing miner!
Here's the error ...
[2018-09-28 19:43:29] pool_have_job: Pool sent a new job (ID: 343197983146868)
[2018-09-28 19:43:54] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:43:54] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:43:54] devfee: Don't be a dick.
[2018-09-28 19:43:54] Stopping miner process

+

[2018-09-28 19:55:20] pool_have_job: Pool sent a new job (ID: 136675056484402)
[2018-09-28 19:55:52] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:55:52] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:55:52] devfee: Don't be a dick.
[2018-09-28 19:55:52] Stopping miner process
 

 

Doc, can you please explain what it is?
And why do you write "Don't be a dick."  

2. And I noticed that the work for you is 1.5 minutes. Logs i can include if u need!
It's an hour, right? If yes - then your commission is 2.5%, not 0.85 !!!

check your firewall/antivirus software is not blocking the miner.
For example i had a user report to me that on zone alarm even if he allowed miner connections, sometimes it blocked them.

I have a few rigs running 24h since i begun to develop the miner, on different coins, and never had it trigger the let's call it 'devfee blocking protection' mechanism.
No antivirus, no firewall and defender disabled on all those machines. Some are win7, some are win10.

Fee is 0.85%, not 2.5%
Fee mining period is never more than a minute. Also its calculated so that it is always around 0.85%/24h.

You can freely run a network sniffer to check it out.

With the commision it is clear, if you checked - ok.


These errors come from the mine, which is on a specific IP address and they are on all farms.
And all these mistakes began only today. Before that, for example, everything worked well.

On farms there are no antiviruses, firewalls. Auto-update is disabled everywhere.

The hang of the network equipment is discarded, since there expensive cisco

Is it possible to take ban on your pools because of the big number from one IP? or ///
Can you have any recommendations for starting in the miner cycle?