SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

1.7.6
key O P dont work. dont swich to next pool on webchain algo. other algo work

those keys have nothing to do with the used algo. Capslock was on maybe?

[twotwosix]

What hashrate you have with webchain?

[doktor83]

What hashrate you have with webchain?

it should be a little lower than v7

[abg00]

What hashrate you have with webchain?

it should be a little lower than v7

strange rate on webchain. one rig work fine with rate 80-85% from local.
but if add 1-2 rig have lot of rejected duplicate share and rate 40-60%

[2019-01-06 15:11:54] Pool accepted result 0xC80AD1CD [121ms]
[2019-01-06 15:11:54] Pool sent a new job (ID: 96e16412aab5c1865246e58fd67b6cdc)
[2019-01-06 15:11:56] Pool accepted result 0xD4AEDD68 [92ms][ S]
[2019-01-06 15:11:58] Pool sent a new job (ID: 2825b66be399a209ae1f10f5bf4ef5fb)
[2019-01-06 15:12:01] Pool rejected result 0x64858290 (duplicate share)
[2019-01-06 15:12:11] Pool difficulty: 20000
[2019-01-06 15:12:11] Pool sent a new job (ID: f4b8fcf6c5cec6a16d8d1ea973e90ece)
[2019-01-06 15:12:17] Pool sent a new job (ID: 06ca85cfb801ec7bd6ca43e63a1be417)
[2019-01-06 15:12:25] Pool rejected result 0x98A210FA (high rate of invalid shares)
[2019-01-06 15:12:34] Pool difficulty: 20000
[2019-01-06 15:12:34] Pool sent a new job (ID: 06ca85cfb801ec7bd6ca43e63a1be417)
[2019-01-06 15:12:39] Pool sent a new job (ID: 8c6b120b42492e89f9f546388378ec2b)

[doktor83]

What hashrate you have with webchain?

it should be a little lower than v7

strange rate on webchain. one rig work fine with rate 80-85% from local.
but if add 1-2 rig have lot of rejected duplicate share and rate 40-60%

[2019-01-06 15:11:54] Pool accepted result 0xC80AD1CD [121ms]
[2019-01-06 15:11:54] Pool sent a new job (ID: 96e16412aab5c1865246e58fd67b6cdc)
[2019-01-06 15:11:56] Pool accepted result 0xD4AEDD68 [92ms][ S]
[2019-01-06 15:11:58] Pool sent a new job (ID: 2825b66be399a209ae1f10f5bf4ef5fb)
[2019-01-06 15:12:01] Pool rejected result 0x64858290 (duplicate share)
[2019-01-06 15:12:11] Pool difficulty: 20000
[2019-01-06 15:12:11] Pool sent a new job (ID: f4b8fcf6c5cec6a16d8d1ea973e90ece)
[2019-01-06 15:12:17] Pool sent a new job (ID: 06ca85cfb801ec7bd6ca43e63a1be417)
[2019-01-06 15:12:25] Pool rejected result 0x98A210FA (high rate of invalid shares)
[2019-01-06 15:12:34] Pool difficulty: 20000
[2019-01-06 15:12:34] Pool sent a new job (ID: 06ca85cfb801ec7bd6ca43e63a1be417)
[2019-01-06 15:12:39] Pool sent a new job (ID: 8c6b120b42492e89f9f546388378ec2b)

you can thank that to the super-duper webchain protocol.
now i don't know why i added it at all, people only have problems and think its miner related.

[Turkish88]

Yes something wrong here, finally i am back to the loud miner

[Uaciuganadu]

Hey Dok,

Is there a way to figure out the best thread_delay for every card?

What is the math behind it and how can we improve the default 319? I have a few more hash compared to the last version so it is effective.

Thank you!

[doktor83]

Hey Dok,

Is there a way to figure out the best thread_delay for every card?

What is the math behind it and how can we improve the default 319? I have a few more hash compared to the last version so it is effective.

Thank you!

There is no math really, also its affects algos differently. For example on V8 algo small changes almost make no difference.
IMO the best number should be between 250-450, everything over 500 makes the hashrate lower.

[sharix80]

What hashrate you have with webchain?

LOUD miner works better. SRB miner not for webchain. Do not use SRB, if you want a stable hashrate.
I have 2000 h/s with my 5xRX550, but after 2 hours rig show 1600 h/s and after 5 hours rig froze.
With LOUD miner my rig works fine for weeks without hanging.
I think the algorithm doesn't work correctly with SRB miner.

[Bakhtra]

So what is the Loud miner doing in this thread?

[Plumpkatt1]

Please help. I have 5 video cards in my rig and I dont have any issues making 4 out of 5 of them work. The 4 that work are RX 480/580 cards. Card 5 which gives me the fit is a R9 290. The secont I fire up srb with the 290 installed I get this problem. I am using 18.6.1 driver but have tried others. Im using SRB 1.7.6 but have had this issue with all versions. My setup is 1 Red Devil RX480, 1 XFX RX580 GTS-xxx, 1 Nitro+ RX580(samsung), 1 Nitro+ RX580(hynix). All 8GB cards. No issues. When I introduce the Sapphire R9 290 Tri-x 4gb card I get this issue. I have virtual memory set at 36000gigs and am running windows 10.

PLEASE HELP!!!!



Initializing OpenCL devices, please wait..

GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 55.0][W: 8][T: 2][F: 1][BUS: 1]
GPU1: Radeon RX 580 Series [ellesmere] [8192 MB][I: 55.0][W: 8][T: 2][F: 1][BUS: 5]
GPU2: Radeon RX 580 Series [ellesmere] [8192 MB][I: 55.0][W: 8][T: 2][F: 1][BUS: 8]
GPU3: Radeon RX 580 Series [hawaii] [4096 MB][I: 28.0][W: 8][T: 2][F: 1][BUS: 6]

---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.7.6
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
---------------------------------------------------------
Total pools: 3

Please wait...

Cryptonight Heavy mode enabled

[2019-01-06 17:32:14] Loading [heavy] kernel for DEVICE BUS_ID[1] ...
[2019-01-06 17:32:14] Loading [heavy] kernel for DEVICE BUS_ID[1] ...
[2019-01-06 17:32:14] Loading [heavy] kernel for DEVICE BUS_ID[5] ...
[2019-01-06 17:32:14] Loading [heavy] kernel for DEVICE BUS_ID[5] ...
[2019-01-06 17:32:15] Loading [heavy] kernel for DEVICE BUS_ID[8] ...
[2019-01-06 17:32:15] Loading [heavy] kernel for DEVICE BUS_ID[8] ...
[2019-01-06 17:32:15] Loading [heavy] kernel for DEVICE BUS_ID[6] ...
[2019-01-06 17:32:15] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram [ctx->Program] for DeviceID 3 (Thread 6)

Stopping miner...Uno momento

Press any key to continue . . .

[Kyklovod]

such a question
Is it possible to view employee statistics from another computer? or just where does srbminer work?

[abg00]

Please help. I have 5 video cards in my rig and I dont have any issues making 4 out of 5 of them work. The 4 that work are RX 480/580 cards. Card 5 which gives me the fit is a R9 290. The secont I fire up srb with the 290 installed I get this problem. I am using 18.6.1 driver but have tried others. Im using SRB 1.7.6 but have had this issue with all versions. My setup is 1 Red Devil RX480, 1 XFX RX580 GTS-xxx, 1 Nitro+ RX580(samsung), 1 Nitro+ RX580(hynix). All 8GB cards. No issues. When I introduce the Sapphire R9 290 Tri-x 4gb card I get this issue. I have virtual memory set at 36000gigs and am running windows 10.

PLEASE HELP!!!!

cache cleared? do you use olcard in config?

[doktor83]

Please help. I have 5 video cards in my rig and I dont have any issues making 4 out of 5 of them work. The 4 that work are RX 480/580 cards. Card 5 which gives me the fit is a R9 290. The secont I fire up srb with the 290 installed I get this problem. I am using 18.6.1 driver but have tried others. Im using SRB 1.7.6 but have had this issue with all versions. My setup is 1 Red Devil RX480, 1 XFX RX580 GTS-xxx, 1 Nitro+ RX580(samsung), 1 Nitro+ RX580(hynix). All 8GB cards. No issues. When I introduce the Sapphire R9 290 Tri-x 4gb card I get this issue. I have virtual memory set at 36000gigs and am running windows 10.

PLEASE HELP!!!!

cache cleared? do you use olcard in config?

Try the --nocache parameter maybe it helps

[Bllacky]

Feedback on
V. 1.7.5

Now it finally works when I have mix of 270X and 280X video cards.
Hashrates are very good for normal V8 algo:
280X 450 H/s
270X 345 H/s
290 530H/s

I do not OC.
I also sometimes get lots of STALE shares.

Good job!

Awesome, thanks for reporting.
Also stales shown in miner are not a problem because those are accepted shares.
Its just more a 'cosmetical thing'.

Feedback on
V. 1.7.6

Hashrates have gone up for normal V8 algo:
280X 455 H/s
270X 400 H/s
290 650H/s

Temperatures seem to be better on the 270X with this version, or maybe now they are read correctly.

[doktor83]

Feedback on
V. 1.7.5

Now it finally works when I have mix of 270X and 280X video cards.
Hashrates are very good for normal V8 algo:
280X 450 H/s
270X 345 H/s
290 530H/s

I do not OC.
I also sometimes get lots of STALE shares.

Good job!

Awesome, thanks for reporting.
Also stales shown in miner are not a problem because those are accepted shares.
Its just more a 'cosmetical thing'.

Feedback on
V. 1.7.6

Hashrates have gone up for normal V8 algo:
280X 455 H/s
270X 400 H/s
290 650H/s

Temperatures seem to be better on the 270X with this version, or maybe now they are read correctly.

Wow such a boost on 270x & 290 awesome!
Thanks again for the report

[gerixusyu]

wrong tread,but cant find tread for that miner I wanna try to mine webchai, i have config.json file,roll back my driver to 23.august.2017 blockchain driver,but no have luck

[Plumpkatt1]

I was having a discussion on discord. So I am copying n pasting a portion of what I wrote below. Would it be possible for this ability to get added to SRBminer? Dies it already exsist and I dont know how to do it?


I just wish srb provided more info per card. I used to use claymore and that would tell me what card had how many accepted and stale/rejected shares. Srb groups the cards into 1 result
when srb submits a share, I dont know which card submitted the share. I miss that ability to see how each card was performing
srb makes tuning tough cause even though I see a collective result, who is to say 1 card is submitting twice the shares and another card is only submitting half the shares. It would be nice to see what each card is actually submitting so I can better tune them.

[livada]

Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?

yesterday you say  LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec

BEST miner dead in 1 sec?


open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec . This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec

[gerixusyu]

Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?

yesterday you say  LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec

BEST miner dead in 1 sec?


open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec . This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec

LIVADA

Where is topic when I say LOUD miner is best miner,I dont know what you talking about.