SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Uaciuganadu]

Hey Dok,

Would you be able to add a compute error line in the API and HTML? It is useful for monitoring.

Thank you.

[doktor83]

Hey Dok,

Would you be able to add a compute error line in the API and HTML? It is useful for monitoring.

Thank you.

Yes, not a problem.

[wacko]

Is it possible to mine Stellite with this miner? Their instructions suggest that it is, but I can't find the "V5" option anywhere.

[doktor83]

Is it possible to mine Stellite with this miner? Their instructions suggest that it is, but I can't find the "V5" option anywhere.

Cryptonight StelliteV8 [stellitev8]

[ManDoneKTM]

i found something weird ... i made 2 bat files of XTL and XTLDT ... Double Thread ... i tested both , same speed , and Double Thread are consuming less memory gpu .... but same hashrate speed , it is normal ? all gpus are rx580 8GB

[ManDoneKTM]

Is it possible to mine Stellite with this miner? Their instructions suggest that it is, but I can't find the "V5" option anywhere.

Option 22 in the setup guide miner .

[uralZURA]

V. 1.7.6

normal V8 algo:
390 850H/s

Win7,GPU driver:Win7-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23,cc 1050,mc 1500

SRBMiner-CN.exe  --config Config\config-normalv8.txt --ccryptonighttype normalv8  --cgpuid 0 --cgpuintensity 30 --cgpuworksize 8 --cgputhreads 3 --cpool xmr-eu1.nanopool.org:14444 --cwallet  XXXXXXX

V. 1.6.9 - 740H/s

Thank you for your work,Dok!

[abg00]

V. 1.7.6

normal V8 algo:
390 850H/s

Win7,GPU driver:Win7-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23,cc 1050,mc 1500

SRBMiner-CN.exe  --config Config\config-normalv8.txt --ccryptonighttype normalv8  --cgpuid 0 --cgpuintensity 30 --cgpuworksize 8 --cgputhreads 3 --cpool xmr-eu1.nanopool.org:14444 --cwallet  XXXXXXX

V. 1.6.9 - 740H/s

Thank you for your work,Dok!

check old card mode. rate better

[GodOfStars]

Hey there can you please tell me how many hashes you are getting with Vega 56/64?

[kripto-para]

hello, how can we find the solution?

These are the claymore commands: -ttli 80 -tstop 85 -tt 60 -fanmin 50 -fanmax 85 -powlim -10 -cclock 1020 -mclock 1890 -cvddc 810 -mvddc 810


How do I do claymore commands in the same way for srbminer?

Thanks in advance for your help.

[sharix80]

hello, how can we find the solution?

These are the claymore commands: -ttli 80 -tstop 85 -tt 60 -fanmin 50 -fanmax 85 -powlim -10 -cclock 1020 -mclock 1890 -cvddc 810 -mvddc 810


How do I do claymore commands in the same way for srbminer?

Thanks in advance for your help.

Use parameters "off_temperature", "target_fan_speed", "off_temperature" in CONFIG.TXT for temperature control.
Downvolting parameters cannot be used in this miner. Use MSI Afterburner. If you use AMD you can change the bios parameters using the polaris bios editor and flash the bios.

[kripto-para]

Use parameters "off_temperature", "target_fan_speed", "off_temperature" in CONFIG.TXT for temperature control.
Downvolting parameters cannot be used in this miner. Use MSI Afterburner. If you use AMD you can change the bios parameters using the polaris bios editor and flash the bios.

I'm using MSI Afterburner.
The PC turns off and on, and the settings are reset each time.
tracking is very difficult and I need to start these settings automatically.

there is something here but I couldn't understand:

"+ "startup_script" can be used to run a script (batch file) before miner starts.
You can for example set clocks, voltages, etc. specific to that algo"

[tallman_ay]

Use parameters "off_temperature", "target_fan_speed", "off_temperature" in CONFIG.TXT for temperature control.
Downvolting parameters cannot be used in this miner. Use MSI Afterburner. If you use AMD you can change the bios parameters using the polaris bios editor and flash the bios.

I'm using MSI Afterburner.
The PC turns off and on, and the settings are reset each time.
tracking is very difficult and I need to start these settings automatically.

there is something here but I couldn't understand:

"+ "startup_script" can be used to run a script (batch file) before miner starts.
You can for example set clocks, voltages, etc. specific to that algo"

Using the settings like claymore will be really helpful, msi after burner is not as good as using the settings from the miner and they give the rig a very good stability
at least add how to set the cclcock and mclock
I have tried the diver Adrenalin 2019 Edition 19.1.1 on vega cards and seems very stable and giviing good results with %1 improvement /'I know it is small but maybe if try to optimize it it might give better results

[murat35ksk]

Any plan to support grin?

[sharix80]

Any plan to support grin?

Grin- scam. -400% after 3 day listing.

[ImZloyHomyak]

SRBMiner Cryptonight AMD GPU Miner
https://www.srbminer.com
------------------------------------------------------------------------------------------------------------
simple, yet so complex
Windows only
------------------------------------------------------------------------------------------------------------

Hi, Linux version will be? 

[Tervolt]

Will be support cn-hosp?

[big_daddy]

Any plan to support grin?

Grin- scam. -400% after 3 day listing.

is not a scam, is the first listing dump, it's normal scenario in the crypto mining industry
is a buy time, not a sell time

[doktor83]

V1.7.7
- Added new algo 'CN-Fast2'
- Added new algo 'CN-Hospital'
- Added compute errors display in json & html stats
- Fixed a bug in networking code that could crash miner
- Fixed a bug with hashrate display on disabled gpu's
- Old_mode is now auto set on Vegas where needed
- A little re-design of miner startup


+ Masari will fork soon, after that you must use cryptonight_type: "fast2"
+ Hospital coin will also fork to a custom POW
+ There was a nasty bug in the networking code which could crash the miner, hopefully it is fixed now
+ Vega users don't have to think about 'old_mode' anymore, as it is forced and auto enabled where it's needed

[Bllacky]

Feedback on
V. 1.7.5

Now it finally works when I have mix of 270X and 280X video cards.
Hashrates are very good for normal V8 algo:
280X 450 H/s
270X 345 H/s
290 530H/s

I do not OC.
I also sometimes get lots of STALE shares.

Good job!

Awesome, thanks for reporting.
Also stales shown in miner are not a problem because those are accepted shares.
Its just more a 'cosmetical thing'.

Feedback on
V. 1.7.6

Hashrates have gone up for normal V8 algo:
280X 455 H/s
270X 400 H/s
290 650H/s

Temperatures seem to be better on the 270X with this version, or maybe now they are read correctly.

Feedback on
V. 1.7.7

Hashrates have gone up by very little for normal V8 algo:
280X 460 H/s
270X 405 H/s
290 655H/s

Fan rpm on the 270X is now correctly reported.

Thank you!