SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

How does it crash, a window opens saying the app has crashed, or ?

It crashes with a blue screen!
That was a joke (a bad one)

Usually happens overnight. I'll wake up to find one of two things:
1) System has restarted on its own.
2) System is hung. I can't even get the monitor to wake up (using on board video, do not have remote capability yet). However, the cards are all behaving like they are hashing in the sense that they fans are running around~2000 RPM but the pool web page says no hashes from my rig. My only option at this point is to force restart the system.

It's pretty consistent that it will do this in ~24 hour timeframe.

Have you tried other drivers , or lowering the intensity ?
There was a bug that made random app crashes, but that was fixed, that's why i asked if a crash window appears.

[hesido]

Doktor, what can you say about the random hash rate?

SRB does get the best hashrate, and I even managed 1000 mh/s for all my cards, in one run, but what happens is this:
e.g. Sometimes, GPU0 gives 920h/s, sometimes the same gpu, just by restarting miner, gives 1000 mh/s, but then some other card, e.g. GPU5 which gave 1000mh/s, may (or may not) do 920-940 mh/s.. The total may vary +/- 800 mh/s, and it doesn't change much during the run (it gets stabilized in a few minutes, stays that way)

Sometimes a gpu gets 0 hashrate, I restart, it fails on compilation phase. I use XMR-Stak to get it working back, switch back to SRB and it begins working (SRB cannot get it unstuck however many restarts!)

[livada]

i have 5 pool and when i pres p mine rgo on next pool. ok. and i must wait for pres p again and again.
any option go direct to pool 5? ctr-shift 5 etc? or pres p for elect  poll in list?

[doktor83]

Doktor, what can you say about the random hash rate?

SRB does get the best hashrate, and I even managed 1000 mh/s for all my cards, in one run, but what happens is this:
e.g. Sometimes, GPU0 gives 920h/s, sometimes the same gpu, just by restarting miner, gives 1000 mh/s, but then some other card, e.g. GPU5 which gave 1000mh/s, may (or may not) do 920-940 mh/s.. The total may vary +/- 800 mh/s, and it doesn't change much during the run (it gets stabilized in a few minutes, stays that way)

Sometimes a gpu gets 0 hashrate, I restart, it fails on compilation phase. I use XMR-Stak to get it working back, switch back to SRB and it begins working (SRB cannot get it unstuck however many restarts!)

this is true only for heavy algo, and i haven't look into it yet. What error do you get when the kernel compile fails? And what do you mean by using xmr stak to get it back working?

[yellovv]

Hi. Please help. I cant get it working.
It always says "Error in pools.txt (ParseError)"
But my pools.txt is 100% correct! I use nanopool adresses

[doktor83]

Hi. Please help. I cant get it working.
It always says "Error in pools.txt (ParseError)"
But my pools.txt is 100% correct! I use nanopool adresses

post the 100% correct pools file here

[mutual.consent]

@Doktor83 - does SRB cache the GPU compile data anywhere on the hard drive to speed up the process in future? I've noticed that one GPU (Vega 64) will not perform better on Heavy no matter what I do but when testing Alloy it outperforms the other GPUs (Vega 56). My current suspicions are that there's either a bug in your implementation for Vega 64 or there's some caching happening and I need to delete these files.

Thanks.

in miner dir, delete .srb files

There aren't any .srb files in the miner folder and I've searched the drive for .srb files but nothing was found. I'm using 1.5.1 and running miner from .bat files located in another directory to the miner. Anywhere else the cache files could be?

No, it creates the files in the miner dir, filenames are like:
RadeonRX580Series12256368CNH.srb

Hmm I looked but couldn't find these files. 1.5.2 also doesn't generate them to the miner folder. I have my miner in C:\srbminer and there are no .srb files there. Is it possible that they aren't generated for Vega or are stored somewhere else?

[yellovv]

post the 100% correct pools file here

Code:

{
"pools" :
[

	{"pool_use_tls" : false, "keepalive" : false, "pool" : "xmr-eu1.nanopool.org:14444", "wallet" : "4Hm3YrYNgczRAP7jbGCZ7vA8XwbBR8DWMU7Bm9FKZqjxQXPBcwMP1kDbK3ntBSdt2c6TmLCPiMSXa39uBiEBwkg4FUv8hdFDxqBKBCMUAT.SBR", "password" : "x"},
	{"pool_use_tls" : false, "keepalive" : false, "pool" : "xmr-eu2.nanopool.org:14444", "wallet" : "4Hm3YrYNgczRAP7jbGCZ7vA8XwbBR8DWMU7Bm9FKZqjxQXPBcwMP1kDbK3ntBSdt2c6TmLCPiMSXa39uBiEBwkg4FUv8hdFDxqBKBCMUAT.SBR", "password" : "x"}
}

[doktor83]

@Doktor83 - does SRB cache the GPU compile data anywhere on the hard drive to speed up the process in future? I've noticed that one GPU (Vega 64) will not perform better on Heavy no matter what I do but when testing Alloy it outperforms the other GPUs (Vega 56). My current suspicions are that there's either a bug in your implementation for Vega 64 or there's some caching happening and I need to delete these files.

Thanks.

in miner dir, delete .srb files

There aren't any .srb files in the miner folder and I've searched the drive for .srb files but nothing was found. I'm using 1.5.1 and running miner from .bat files located in another directory to the miner. Anywhere else the cache files could be?

No, it creates the files in the miner dir, filenames are like:
RadeonRX580Series12256368CNH.srb

Hmm I looked but couldn't find these files. 1.5.2 also doesn't generate them to the miner folder. I have my miner in C:\srbminer and there are no .srb files there. Is it possible that they aren't generated for Vega or are stored somewhere else?

Maybe it doesn't have enough rights to write to the folder, because after every first compiling a cache file is created, so next time it checks for the existence of that file, and if it exists it loads that and does not compile again.

[doktor83]

it's 99%:
i bolded what is missing ( closing ] at the end)

{
"pools" :
[

   {"pool_use_tls" : false, "keepalive" : false, "pool" : "xmr-eu1.nanopool.org:14444", "wallet" : "4Hm3YrYNgczRAP7jbGCZ7vA8XwbBR8DWMU7Bm9FKZqjxQXPBcwMP1kDbK3ntBSdt2c6TmLCPiMSXa39 uBiEBwkg4FUv8hdFDxqBKBCMUAT.SBR", "password" : "x"},
   {"pool_use_tls" : false, "keepalive" : false, "pool" : "xmr-eu2.nanopool.org:14444", "wallet" : "4Hm3YrYNgczRAP7jbGCZ7vA8XwbBR8DWMU7Bm9FKZqjxQXPBcwMP1kDbK3ntBSdt2c6TmLCPiMSXa39 uBiEBwkg4FUv8hdFDxqBKBCMUAT.SBR", "password" : "x"}
]
}

[hesido]

Doktor, what can you say about the random hash rate?

SRB does get the best hashrate, and I even managed 1000 mh/s for all my cards, in one run, but what happens is this:
e.g. Sometimes, GPU0 gives 920h/s, sometimes the same gpu, just by restarting miner, gives 1000 mh/s, but then some other card, e.g. GPU5 which gave 1000mh/s, may (or may not) do 920-940 mh/s.. The total may vary +/- 800 mh/s, and it doesn't change much during the run (it gets stabilized in a few minutes, stays that way)

Sometimes a gpu gets 0 hashrate, I restart, it fails on compilation phase. I use XMR-Stak to get it working back, switch back to SRB and it begins working (SRB cannot get it unstuck however many restarts!)

this is true only for heavy algo, and i haven't look into it yet. What error do you get when the kernel compile fails? And what do you mean by using xmr stak to get it back working?

For example, I start a run, and 1 or 2 gpu's produce 0 hashes, and this is warned in the console. I quit without waiting.. Start again, the first gpu which produced 0 hashrate cannot get past the compile, it just hangs, no errors. When this happens, the gpu never gets past the compile phase with SRB. I then run XMR-Stak, GPU is working, and I go back to SRB, the GPU passes compile and starts working, sort of like XMR-Stak gets it unstuck, maybe it does something different when initializing GPU's.

[doktor83]

Doktor, what can you say about the random hash rate?

SRB does get the best hashrate, and I even managed 1000 mh/s for all my cards, in one run, but what happens is this:
e.g. Sometimes, GPU0 gives 920h/s, sometimes the same gpu, just by restarting miner, gives 1000 mh/s, but then some other card, e.g. GPU5 which gave 1000mh/s, may (or may not) do 920-940 mh/s.. The total may vary +/- 800 mh/s, and it doesn't change much during the run (it gets stabilized in a few minutes, stays that way)

Sometimes a gpu gets 0 hashrate, I restart, it fails on compilation phase. I use XMR-Stak to get it working back, switch back to SRB and it begins working (SRB cannot get it unstuck however many restarts!)

this is true only for heavy algo, and i haven't look into it yet. What error do you get when the kernel compile fails? And what do you mean by using xmr stak to get it back working?

For example, I start a run, and 1 or 2 gpu's produce 0 hashes, and this is warned in the console. I quit without waiting.. Start again, the first gpu which produced 0 hashrate cannot get past the compile, it just hangs, no errors. When this happens, the gpu never gets past the compile phase with SRB. I then run XMR-Stak, GPU is working, and I go back to SRB, the GPU passes compile and starts working, sort of like XMR-Stak gets it unstuck, maybe it does something different when initializing GPU's.

try lowering the intensity by 2-3 when it gets stuck, and try running it like that. But the problem is interesting anyways. Can you send me a log containing all of this?

[yellovv]

it's 99%:
i bolded what is missing ( closing ] at the end)

{
"pools" :
[

   {"pool_use_tls" : false, "keepalive" : false, "pool" : "xmr-eu1.nanopool.org:14444", "wallet" : "4Hm3YrYNgczRAP7jbGCZ7vA8XwbBR8DWMU7Bm9FKZqjxQXPBcwMP1kDbK3ntBSdt2c6TmLCPiMSXa39 uBiEBwkg4FUv8hdFDxqBKBCMUAT.SBR", "password" : "x"},
   {"pool_use_tls" : false, "keepalive" : false, "pool" : "xmr-eu2.nanopool.org:14444", "wallet" : "4Hm3YrYNgczRAP7jbGCZ7vA8XwbBR8DWMU7Bm9FKZqjxQXPBcwMP1kDbK3ntBSdt2c6TmLCPiMSXa39 uBiEBwkg4FUv8hdFDxqBKBCMUAT.SBR", "password" : "x"}
]
}

Indeed.Thanks for the notice

[madmossy]

Auto intensity for the R9FuryX seems a bit high, defaults to 59 for Heavy, 118 for V7, hash rate is significantly better when its set to 50/100

Any higher or lower and hash rates start to drop again.

[yellovv]

Anybody has radeon 270x? What is best value for intensity?

[hesido]

Doktor, what can you say about the random hash rate?

SRB does get the best hashrate, and I even managed 1000 mh/s for all my cards, in one run, but what happens is this:
e.g. Sometimes, GPU0 gives 920h/s, sometimes the same gpu, just by restarting miner, gives 1000 mh/s, but then some other card, e.g. GPU5 which gave 1000mh/s, may (or may not) do 920-940 mh/s.. The total may vary +/- 800 mh/s, and it doesn't change much during the run (it gets stabilized in a few minutes, stays that way)

Sometimes a gpu gets 0 hashrate, I restart, it fails on compilation phase. I use XMR-Stak to get it working back, switch back to SRB and it begins working (SRB cannot get it unstuck however many restarts!)

this is true only for heavy algo, and i haven't look into it yet. What error do you get when the kernel compile fails? And what do you mean by using xmr stak to get it back working?

For example, I start a run, and 1 or 2 gpu's produce 0 hashes, and this is warned in the console. I quit without waiting.. Start again, the first gpu which produced 0 hashrate cannot get past the compile, it just hangs, no errors. When this happens, the gpu never gets past the compile phase with SRB. I then run XMR-Stak, GPU is working, and I go back to SRB, the GPU passes compile and starts working, sort of like XMR-Stak gets it unstuck, maybe it does something different when initializing GPU's.

try lowering the intensity by 2-3 when it gets stuck, and try running it like that. But the problem is interesting anyways. Can you send me a log containing all of this?

Sure:
Log For Doktor

You can search for "hesido" where I added comments. There's not much meat though, it just hangs. Here you won't see retrying and stucking again becasue I either restarted after XMR-Stak or rebooted. You can also see the wildly varying hashrates for the same gpu's.

[loneSilentWolf]

My 390 is getting 650hs with sbrminer. How can I boost the hash rate? Running at 1100 core,  1530 mem

[tfarion]

when I'm mining in HEAVY mode I have 1100 hash per GPU

But in NORMAL-V7 only 950, is it normal? or do I get the same hash in both algorithms?

double_threads = true (in both)

automatic intensity

Can someone help me?

[Amigo9881]

How can i setup API to monitor my rig through url.

Super noob here, please provide step by step guide anyone.

btw great job Dok!, super stable miner.

thanks

[UnclWish]

Anybody has radeon 270x? What is best value for intensity?

I have 270X 4Gb. On SRB old version (1.4.x) I can get max speed. On latest versions speed slower 5-10%.
Best speed I have got on my 270X 4Gb is on Claymore 11.3 fee-free with -h460 and -dmem 1 options. It's gives speed higher than max speed that SRB gives on 5-10 h/s.