SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[dragonmike]

Out of curiosity, how much juice are you feeding the Vega cores for freqs between 1400 and 1450?
I've got my 64's as follows on CN algos:

GPU_P7=1428;905
Mem_P3=1140;1000

[Sonic-X]

ok HR is good and this is it. 20/30+- per card.

Now. how much electricity is it?

3*vega56(64bios)(ref air samsung)+1vega64 Liquid+4Fan - form the wall = 700W in hevy


6* vega56 NITRO+(stock bios)(hynix mem)+ 6fan - from the wall= 1000W in heavy and 1020/30W in v7

 What are the intensity and worksize settings for you at Vega56(hynix) Nitro +?
 thanks.

[livada]

Out of curiosity, how much juice are you feeding the Vega cores for freqs between 1400 and 1450?
I've got my 64's as follows on CN algos:

GPU_P7=1428;905
Mem_P3=1140;1000

Vega 56 air ref (samsung) 64 bios:
https://image.prntscr.com/image/iiz5MiP9QIeBo8EsJQ2Biw.jpg
Vega 64 Liquid(samsung):
https://image.prntscr.com/image/seepnLTiQtiueahdUVPuWQ.jpg
Vega 56 Nitro+ (hynix) stock bios
https://image.prntscr.com/image/oGXW6yYzQVWOa-QY1sV7Tg.jpg

What are the intensity and worksize settings for you at Vega56(hynix) Nitro +?

Intensity: for all vega 56  card(samsung and hynix) with stock and 64 bios[/b]
Heavy/haven/tube/italo : 56/8/2 - 1550+HR
v7/stl : 112/16/2  or 120/8/2  - 2000+HR
fast : 112/16/2 or 120/8/2 - 3800/3900HR
lite/litev7 : 234/8/2 - 4200HR

vega 64 intensity:
Heavy/haven/tube/italo : 60/8/2 - 1550HR
v7/stl : 120/16:2 - 2100/2200HR
fast : 120/16/2 - 4000+HR

[Sonic-X]

Intensity: for all vega 56  card(samsung and hynix) with stock and 64 bios[/b]
Heavy/haven/tube/italo : 56/8/2 - 1550+HR
v7/stl : 112/16/2  or 120/8/2  - 2000+HR
fast : 112/16/2 or 120/8/2 - 3800/3900HR
lite/litev7 : 234/8/2 - 4200HR

vega 64 intensity:
Heavy/haven/tube/italo : 60/8/2 - 1550HR
v7/stl : 120/16:2 - 2100/2200HR
fast : 120/16/2 - 4000+HR

 thank you very mutch

[zbucks_project]

Consider mining zBucks with Cryptonight Heavy - Just announced, visit https://bitcointalk.org/index.php?topic=4625226.msg41775000#msg41775000

[dragonmike]

Consider mining zBucks with Cryptonight Heavy - Just announced, visit https://bitcointalk.org/index.php?topic=4625226.msg41775000#msg41775000

Consider getting a proper job and stop spamming your shitcoins here.

[roma__11]

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50C and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.

Leave the temperature at rest, this peak load when everything is closed and in the room to 70 degrees, you can not hear me!
it is important that more than 6 and all ...
And only on FAST

[doktor83]

OK, now at the bottom of the first post you can find settings for various cards, miner settings & overdriventool settings.
Livada sent settings for Vega cards (thank you).

If anyone wants to share his/her settings post it in form :

Vega 64

heavy/haven/bittubev2/italo : 60/8/2 ( ~1550+HR )
v7/stellitev7 : 120/16/2 ( ~2100/2200+HR )
fast : 120/16/2 ( ~4000+HR )

Also overdriventool settings in form :

Vega 64
GPU: P7 = 1478/920
MEM: P3 = 1100/910

[ofpcarnage]

Hi everyone first time using this miner and I'm trying to find the best settings for my cards to run nice and stable yes efficiently

I have the rx480  8gb sapphire cards
I have the rx470  4gb sapphire cards
I have the Vega 64 Red Devil cards

What are the best settings to use when mining HEAVY (ALLOY)

As in Clock settings / power settings / and miner settings
Thanks in advance

[konstr2]

Hi all.
Have a problem: all cards on same BUS (BUSID:0), so the miner doesn`t work (because it can`t recognize cards separately).
Miner V1.6.3
somebody can help to solve this?
Thanks a lot!

[doktor83]

Hi all.
Have a problem: all cards on same BUS (BUSID:0), so the miner doesn`t work (because it can`t recognize cards separately).
Miner V1.6.3
somebody can help to solve this?
Thanks a lot!

not a miner issue, its a driver issue, change drivers

[livada]

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50C and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.

Leave the temperature at rest, this peak load when everything is closed and in the room to 70 degrees, you can not hear me!
it is important that more than 6 and all ...
And only on FAST

because FAST is hard to mining and consuming more electricity and is warmer. and then we go back to the temperature again.
75C is limit for Liquid - for air 85C is limit . put MHZ down and mv down and all work fine.
this is not srbminer problem. This is your problem.

next time you write version - HR-gpuMHZ-mv-memMHZ-mv- you not say any but ask WHY WHY..

[livada]

Hi everyone first time using this miner and I'm trying to find the best settings for my cards to run nice and stable yes efficiently

I have the rx580  8gb sapphire cards
I have the rx480  4gb sapphire cards
I have the Vega 64 Red Devil cards

What are the best settings to use when mining HEAVY (ALLOY)
Thanks in advance

(ALLOY) -ultraHEAVY
vega56 - 120/16/2
samsung - 1030/1050HR
hynix - 960/980HR (6*gpu=5750HR=990/995W)

[roma__11]

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50C and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.

Leave the temperature at rest, this peak load when everything is closed and in the room to 70 degrees, you can not hear me!
it is important that more than 6 and all ...
And only on FAST

because FAST is hard to mining and consuming more electricity and is warmer. and then we go back to the temperature again.
75C is limit for Liquid - for air 85C is limit . put MHZ down and mv down and all work fine.
this is not srbminer problem. This is your problem.

Are you kidding again?
I write - when the cards are less than 7 everything works fine, when there are more of them, in my case 12 then the computer reboots, it works differently from 10 to 40 minutes !!!!!!

Cлyшaйтe мoжeт мoй aнглийcкий тaк плox )) Oбъяcнитe людям, чтo кoгдa бoльшe шecти кapт тo чepeз нeкoтopoe вpeмя кoмп пpocтo peбyтитcя, нa aлгopитмe CN-FAST, нe пo тeмпepaтype нe пoнятнo пoчeмy, пpocтo cиcтeмнaя oшибкa, ee дaжe в жypнaлax нeт нe eдинoгo нaмeкa, дaжe кoгдa пpocтo мoнитopишь тeмпepaтypy ядpa и пaмяти, oни низкиe, нeт ни кaкиx пpeдвecтникoв, пpocтo бaц и вce, вoт кaк дoнecти .....

[livada]

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50C and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.

Leave the temperature at rest, this peak load when everything is closed and in the room to 70 degrees, you can not hear me!
it is important that more than 6 and all ...
And only on FAST

because FAST is hard to mining and consuming more electricity and is warmer. and then we go back to the temperature again.
75C is limit for Liquid - for air 85C is limit . put MHZ down and mv down and all work fine.
this is not srbminer problem. This is your problem.

Are you kidding again?
I write - when the cards are less than 7 everything works fine, when there are more of them, in my case 12 then the computer reboots, it works differently from 10 to 40 minutes !!!!!!

Are you kidding again?

you again not write any? version- MHZ ? mv? but ASK ASK again?

you try undevorlting and underclocking=? only 10 -20mhz down and  go back write  work or not work.

[roma__11]

Are you kidding again?

you again not write any? version- MHZ ? mv? but ASK ASK again?

you try undevorlting and underclocking=? only 10 -20mhz down and  go back write  work or not work.

I write - when the cards are less than 7 everything works fine, when there are more of them, in my case 12 then the computer reboots, it works differently from 10 to 40 minutes !!!!!!

Cлyшaйтe мoжeт мoй aнглийcкий тaк плox )) Oбъяcнитe людям, чтo кoгдa бoльшe шecти кapт тo чepeз нeкoтopoe вpeмя кoмп пpocтo peбyтитcя, нa aлгopитмe CN-FAST, нe пo тeмпepaтype нe пoнятнo пoчeмy, пpocтo cиcтeмнaя oшибкa, ee дaжe в жypнaлax нeт нe eдинoгo нaмeкa, дaжe кoгдa пpocтo мoнитopишь тeмпepaтypy ядpa и пaмяти, oни низкиe, нeт ни кaкиx пpeдвecтникoв, пpocтo бaц и вce, вoт кaк дoнecти .....


for 6 cards, everything works fine, more cards do not work !!!!!!!!!!!!!!!!!!!!!

[livada]

Are you kidding again?

you again not write any? version- MHZ ? mv? but ASK ASK again?

you try undevorlting and underclocking=? only 10 -20mhz down and  go back write  work or not work.

I write - when the cards are less than 7 everything works fine, when there are more of them, in my case 12 then the computer reboots, it works differently from 10 to 40 minutes !!!!!!

Cлyшaйтe мoжeт мoй aнглийcкий тaк плox )) Oбъяcнитe людям, чтo кoгдa бoльшe шecти кapт тo чepeз нeкoтopoe вpeмя кoмп пpocтo peбyтитcя, нa aлгopитмe CN-FAST, нe пo тeмпepaтype нe пoнятнo пoчeмy, пpocтo cиcтeмнaя oшибкa, ee дaжe в жypнaлax нeт нe eдинoгo нaмeкa, дaжe кoгдa пpocтo мoнитopишь тeмпepaтypy ядpa и пaмяти, oни низкиe, нeт ни кaкиx пpeдвecтникoв, пpocтo бaц и вce, вoт кaк дoнecти .....

just remove the excess card and fix the problem forever

[roma__11]

Are you kidding again?

you again not write any? version- MHZ ? mv? but ASK ASK again?

you try undevorlting and underclocking=? only 10 -20mhz down and  go back write  work or not work.

I write - when the cards are less than 7 everything works fine, when there are more of them, in my case 12 then the computer reboots, it works differently from 10 to 40 minutes !!!!!!

Cлyшaйтe мoжeт мoй aнглийcкий тaк плox )) Oбъяcнитe людям, чтo кoгдa бoльшe шecти кapт тo чepeз нeкoтopoe вpeмя кoмп пpocтo peбyтитcя, нa aлгopитмe CN-FAST, нe пo тeмпepaтype нe пoнятнo пoчeмy, пpocтo cиcтeмнaя oшибкa, ee дaжe в жypнaлax нeт нe eдинoгo нaмeкa, дaжe кoгдa пpocтo мoнитopишь тeмпepaтypy ядpa и пaмяти, oни низкиe, нeт ни кaкиx пpeдвecтникoв, пpocтo бaц и вce, вoт кaк дoнecти .....

just remove the excess card and fix the problem forever

this is the answer???
farm for 12 cards, a question in the miner!

[livada]

Are you kidding again?

you again not write any? version- MHZ ? mv? but ASK ASK again?

you try undevorlting and underclocking=? only 10 -20mhz down and  go back write  work or not work.

I write - when the cards are less than 7 everything works fine, when there are more of them, in my case 12 then the computer reboots, it works differently from 10 to 40 minutes !!!!!!

Cлyшaйтe мoжeт мoй aнглийcкий тaк плox )) Oбъяcнитe людям, чтo кoгдa бoльшe шecти кapт тo чepeз нeкoтopoe вpeмя кoмп пpocтo peбyтитcя, нa aлгopитмe CN-FAST, нe пo тeмпepaтype нe пoнятнo пoчeмy, пpocтo cиcтeмнaя oшибкa, ee дaжe в жypнaлax нeт нe eдинoгo нaмeкa, дaжe кoгдa пpocтo мoнитopишь тeмпepaтypy ядpa и пaмяти, oни низкиe, нeт ни кaкиx пpeдвecтникoв, пpocтo бaц и вce, вoт кaк дoнecти .....

just remove the excess card and fix the problem forever

this is the answer???
farm for 12 cards, a question in the miner!

yes

fast algo is HARD. and you card or powersuply not work more than 10 min withz  16680mhz/1100.  this is it.
Your fan work with 100%(3300rpm) and after 10 min  HBC mem broken and reset. i see your temp. 2 card have 60+C more(on heavy) . and this is problem. 1 gpu  HBC broken and  rig go in reset
put gpu down and try.
 stop ask .on this topic nobody have 12 vega in 1 rig(and we are not talking about vega Liquid) .and nobody help you.
you have to find a solution and then divide them with us


how many HR in FAST? i have 4050-4100. you 5000?- and how much electricity do you have?

and you not wrtite any. I not see gpu mhz/mv and mem mhz/mv.

[roma__11]

yes

fast algo is HARD. and you card or powersuply not work more than 10 min withz  16680mhz/1100.  this is it.
You fan work with 100% and after 10 min  HBC mem broken and reset. i see your temp. 2 card have 60+C more(on heavy) . and this is problem. 1 gpu  HBC broken and  rig go in reset
put gpu down and try.
 stop ask .on this topic nobody have 12 vega in 1 rig(and we are not talking about vega Liquid) .and nobody help you.
you have to find a solution and then divide them with us


how many HR in FAST? i have 4050-4100. you 5000?- and how much electricity do you have?

and you not wrtite any. I not see gpu mhz/mv and mem mhz/mv.

It is not important at all, but if you are interested:
Core 1560/950   Mem 1100/875 - Fast/4100+
Core 1668/1150 Mem 1100/900 - Heavy/1700+
win10-64bit-radeon-software-adrenalin-edition-18.6.1-june13