|
qwep1
|
 |
July 23, 2018, 09:09:34 PM |
|
hi all what setting for bittube for 580 4 gb
|
|
|
|
|
|
|
|
|
|
|
|
|
Transactions must be included in a block to be properly completed. When you send a transaction, it is broadcast to miners. Miners can then optionally include it in their next blocks. Miners will be more inclined to include your transaction if it has a higher transaction fee.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
UAGet
Newbie
 Offline
Activity: 70
Merit: 0
|
|
July 24, 2018, 05:37:58 AM |
|
Hi! Are there plans to support the purk algorithm? |
|
|
|
|
|
doktor83 (OP)
|
|
July 24, 2018, 06:33:03 AM
Last edit: July 24, 2018, 09:37:19 AM by doktor83 |
|
hi all what setting for bittube for 580 4 gb
Auto intensity should be good enough, also you can try the value auto gives + 1. 4GB cards work better with 1 thread on tube. so this should be good:
{
"cryptonight_type" : "bittubev2",
"intensity" : 0,
"double_threads" : false,
} |
|
|
|
|
doktor83 (OP)
|
|
July 24, 2018, 06:33:40 AM |
|
Hi! Are there plans to support the purk algorithm? Nope, it's not cryptonight algo. |
|
|
|
kryx
Newbie
Offline
Activity: 91
Merit: 0
|
|
July 24, 2018, 07:55:11 AM |
|
Does this miner works with the old R9 280x ?
Anyone tried?
|
|
|
|
|
|
doktor83 (OP)
|
|
July 24, 2018, 07:56:14 AM |
|
Does this miner works with the old R9 280x ?
Anyone tried?
yes it works |
|
|
|
chafer99
Member
Offline
Activity: 99
Merit: 10
|
|
July 24, 2018, 09:34:50 AM |
|
SRB is best for my 4xR380 (CN7 - 740H/s per card - 1050/1600Mhz) but very unstable: "application has been blocked from accessing graphics hardware".
The same problems as default settings (1000/1500Mhz). Driver 18.5.1 whql, Win10 (1803). Claymore 11.3 is OK.
What settings for RX580 8Gb? I got only 820H/s in CN7 (intensity 60/8/2, 1430/2200Mhz).
|
|
|
|
|
|
doktor83 (OP)
|
|
July 24, 2018, 09:44:35 AM |
|
SRB is best for my 4xR380 (CN7 - 740H/s per card - 1050/1600Mhz) but very unstable: "application has been blocked from accessing graphics hardware".
The same problems as default settings (1000/1500Mhz). Driver 18.5.1 whql, Win10 (1803). Claymore 11.3 is OK.
What settings for RX580 8Gb? I got only 820H/s in CN7 (intensity 60/8/2, 1430/2200Mhz).
Application blocked text = driver crash Try with 1 thread, i had better results with 1 thread when testing on 380 4g. 56/8/2 is ok for 580 8g. Are you using a custom strap? Memory brand? |
|
|
|
|
JuanHungLo
|
|
July 24, 2018, 11:01:50 AM |
|
Hi! Are there plans to support the purk algorithm? Nope, it's not cryptonight algo. From Purk's page: Based on Boolberry & CryptoNote technology,... |
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
|
doktor83 (OP)
|
|
July 24, 2018, 11:04:04 AM |
|
Hi! Are there plans to support the purk algorithm? Nope, it's not cryptonight algo. From Purk's page: Based on Boolberry & CryptoNote technology,... From purk.miner.rocks : Please use supported mining apps and configs for wildkeccak |
|
|
|
SpceGhst
Jr. Member
Offline
Activity: 269
Merit: 4
|
|
July 24, 2018, 11:12:21 AM |
|
Hi! Are there plans to support the purk algorithm? Nope, it's not cryptonight algo. From Purk's page: Based on Boolberry & CryptoNote technology,... If you read the ANN thread, algo is wild keccak... https://bitcointalk.org/index.php?topic=3213127.0 |
|
|
|
|
chafer99
Member
Offline
Activity: 99
Merit: 10
|
|
July 24, 2018, 11:31:26 AM |
|
SRB is best for my 4xR380 (CN7 - 740H/s per card - 1050/1600Mhz) but very unstable: "application has been blocked from accessing graphics hardware".
The same problems as default settings (1000/1500Mhz). Driver 18.5.1 whql, Win10 (1803). Claymore 11.3 is OK.
What settings for RX580 8Gb? I got only 820H/s in CN7 (intensity 60/8/2, 1430/2200Mhz).
Application blocked text = driver crash Try with 1 thread, i had better results with 1 thread when testing on 380 4g. 56/8/2 is ok for 580 8g. Are you using a custom strap? Memory brand? Thanks, now intensity 56, thread 1 - 700H/s (R380 2g, samsung) looks stable. (previous 31/8/2 - 740H/s) RX580 in default (no custom straps/mem). But not bad in Heavy algo - 1000H/s |
|
|
|
|
|
|
|
doktor83 (OP)
|
|
July 24, 2018, 11:36:30 AM |
|
SRB is best for my 4xR380 (CN7 - 740H/s per card - 1050/1600Mhz) but very unstable: "application has been blocked from accessing graphics hardware".
The same problems as default settings (1000/1500Mhz). Driver 18.5.1 whql, Win10 (1803). Claymore 11.3 is OK.
What settings for RX580 8Gb? I got only 820H/s in CN7 (intensity 60/8/2, 1430/2200Mhz).
Application blocked text = driver crash Try with 1 thread, i had better results with 1 thread when testing on 380 4g. 56/8/2 is ok for 580 8g. Are you using a custom strap? Memory brand? Thanks, now intensity 56, thread 1 - 700H/s (R380 2g, samsung) looks stable. (previous 31/8/2 - 740H/s) RX580 in default (no custom straps/mem). But not bad in Heavy algo - 1000H/s When i was testing r9 380 with double threads i could not go beyond intensity 28-29, it simply always crashed the driver. |
|
|
|
|
doktor83 (OP)
|
|
July 24, 2018, 11:37:54 AM |
|
so i checked out the opencl kernel of purk and it has nothing to do with cryptonight algo. That's why there are wildkeccak miners for purk, not cryptonight miners. |
|
|
|
chafer99
Member
Offline
Activity: 99
Merit: 10
|
|
July 24, 2018, 12:18:30 PM
Last edit: July 24, 2018, 12:47:18 PM by chafer99 |
|
SRB is best for my 4xR380 (CN7 - 740H/s per card - 1050/1600Mhz) but very unstable: "application has been blocked from accessing graphics hardware".
The same problems as default settings (1000/1500Mhz). Driver 18.5.1 whql, Win10 (1803). Claymore 11.3 is OK.
What settings for RX580 8Gb? I got only 820H/s in CN7 (intensity 60/8/2, 1430/2200Mhz).
Application blocked text = driver crash Try with 1 thread, i had better results with 1 thread when testing on 380 4g. 56/8/2 is ok for 580 8g. Are you using a custom strap? Memory brand? Thanks, now intensity 56, thread 1 - 700H/s (R380 2g, samsung) looks stable. (previous 31/8/2 - 740H/s) RX580 in default (no custom straps/mem). But not bad in Heavy algo - 1000H/s When i was testing r9 380 with double threads i could not go beyond intensity 28-29, it simply always crashed the driver. at 31 intensity works, but after 4-5 hours driver crashed, (the same as 28-30 intensity). https://imgur.com/oTgtb0p |
|
|
|
|
hesido
Jr. Member
Offline
Activity: 158
Merit: 5
|
|
July 24, 2018, 09:42:20 PM |
|
SRB is best for my 4xR380 (CN7 - 740H/s per card - 1050/1600Mhz) but very unstable: "application has been blocked from accessing graphics hardware".
The same problems as default settings (1000/1500Mhz). Driver 18.5.1 whql, Win10 (1803). Claymore 11.3 is OK.
What settings for RX580 8Gb? I got only 820H/s in CN7 (intensity 60/8/2, 1430/2200Mhz).
Application blocked text = driver crash Try with 1 thread, i had better results with 1 thread when testing on 380 4g. 56/8/2 is ok for 580 8g. Are you using a custom strap? Memory brand? Thanks, now intensity 56, thread 1 - 700H/s (R380 2g, samsung) looks stable. (previous 31/8/2 - 740H/s) RX580 in default (no custom straps/mem). But not bad in Heavy algo - 1000H/s When i was testing r9 380 with double threads i could not go beyond intensity 28-29, it simply always crashed the driver. at 31 intensity works, but after 4-5 hours driver crashed, (the same as 28-30 intensity). https://imgur.com/oTgtb0pTry to adjust your OC, most instabilities I've had could be solved by throwing more voltage at the cards or reducing the frequencies. |
|
|
|
|
chafer99
Member
Offline
Activity: 99
Merit: 10
|
|
July 25, 2018, 04:35:47 AM |
|
SRB is best for my 4xR380 (CN7 - 740H/s per card - 1050/1600Mhz) but very unstable: "application has been blocked from accessing graphics hardware".
The same problems as default settings (1000/1500Mhz). Driver 18.5.1 whql, Win10 (1803). Claymore 11.3 is OK.
What settings for RX580 8Gb? I got only 820H/s in CN7 (intensity 60/8/2, 1430/2200Mhz).
Application blocked text = driver crash Try with 1 thread, i had better results with 1 thread when testing on 380 4g. 56/8/2 is ok for 580 8g. Are you using a custom strap? Memory brand? Thanks, now intensity 56, thread 1 - 700H/s (R380 2g, samsung) looks stable. (previous 31/8/2 - 740H/s) RX580 in default (no custom straps/mem). But not bad in Heavy algo - 1000H/s When i was testing r9 380 with double threads i could not go beyond intensity 28-29, it simply always crashed the driver. at 31 intensity works, but after 4-5 hours driver crashed, (the same as 28-30 intensity). https://imgur.com/oTgtb0pTry to adjust your OC, most instabilities I've had could be solved by throwing more voltage at the cards or reducing the frequencies. Yes, i tried OC, other miners, algos, etc.(claymore pow7, zcash, ethash is OK). This problem (crash driver) they only cards conected to splitter-PCIe: https://ae01.alicdn.com/kf/HTB167XXaBUSMeJjSszeq6AKgpXae/CY-PCI-e-Express-1x-to-4-Port-1x-Switch-Multiplier-Splitter-Hub-Riser-Card-with.jpg_640x640.jpg |
|
|
|
|
puntodecontrol
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 25, 2018, 09:44:50 AM |
|
how do you uses this miner with undervolting? With Afterburner? Because it does not support cvddc in config.
|
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
July 25, 2018, 01:06:33 PM |
|
how do you uses this miner with undervolting? With Afterburner? Because it does not support cvddc in config.
via bios editing |
|
|
|
|
|
