Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Claymore]

Hi,
will this work with ETH suprnova? Or with sammys eth proxy with suprnova?
https://github.com/sammy007/ether-proxy/

If yes, could someone post a running config for the proxy and for the dual miner.

If no. OK than i'm not to stupid to get it run...

regards
Marcus

It does not work with ETH suprnova because they do not support Stratum for ETH.

Hi, ocminer says they support stratum... Stratum Port online: http://eth.suprnova.cc:4000
But ok right now i'm mining on coinmine...

thanks.

regards

Stratum addresses cannot begin with "http://". They have own understanding of "stratum" I think.

[1713238608]

1713238608

[1713238608]

1713238608

[1713238608]

1713238608

[1713238608]

1713238608

[1713238608]

1713238608

[Trimegistus]

another maybe stupid question, which is the recommended -dcri value for one 7970?

There are no magic rules; you have to adjust your value to your pool and find the settings that will produces less rejects.

I use -dcri 20 for my 270x and 7950 rigs on suprnova and I'm getting less than 1% rejects.

[freeapp]

another maybe stupid question, which is the recommended -dcri value for one 7970?

There are no magic rules; you have to adjust your value to your pool and find the settings that will produces less rejects.

I use -dcri 20 for my 270x and 7950 rigs on suprnova and I'm getting less than 1% rejects.

Hi,
thx.
But with -dcri 30 i get only about 300MHs for dcr. with sgminer and intensity 25 i get about 1.1 GHs...
I will try to see what best fits for dual mining...

regards,
Marcus

[Maxikosw]

OMG what update..I would name my unborn child to claymore but its illigal there... 

[elzium]

So... no need for RAM anymore. Tried it out with just 1gig and works fine, dont have smaller one handy. Oh man.
You might wanna consider rising the fee. Or make variable -fee

Do you mean you do not need at least 4GB system memory for the Claymore miner 4.0 now? That is awesome.

Same rig didnt work even with 4GB before, had 6GB in. Now 1GB works, but it got lots of rejects, didnt test it too long but left it with 3GB. Now 10 hours and 0,4% rejects on dcr.

[citronick]

Well I created a web wallet but the stupid thing says that the wallet address will change every time I use it?  WTF?  I usually setup auto payout on sites like Supranova but due to that stupidity I won't be able to use auto payout at all.  And none of the GUI work to run locally no wonder Decred is doing so awful for price at this time there is nothing simple like ethwallet that you just run and it auto syncs and allows you to receive and send payments easily.  Until they makes this awful mess easier I don't see Decred going up in value it is too complicated for the average user to trade in it.

Until real simple tools are available this coin is not going to go up in value much at all it's too complicated.

if you're really lazy you can always use bittrex's wallet. of course downloading the wallet is way better (and not that hard)

I do agree with this part though: Until real simple tools are available this coin is not going to go up in value much at all it's too complicated.

I was at suprnova for DCR for awhile too, but with having many wallets taking too much resources from my mac, i settled with zpool that gives me option of BTC payment instead of DCR.

[Claymore]

v4.0 Beta2 - bug fix related to "-allpools 1" and "-allcoins 1" options, download this update if you use v4.0 and use any of these options.
Skip this update if you don't use these options or you don't use v4.0.

[qqqq]

Another issue at the pool.mn

We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.

Findblocks disabled, new blocks will currently not show up in the frontend
Blockupdate disabled, blocks and transactions confirmations are delayed
Payouts disabled, you will not receive any coins to your offline wallet for the time being

Claymore, when the SOLO VERSION is ARRIVE ? Btw, it will be only ETH solo mode/DCR-pools or we can choose the both SOLO?

[Claymore]

Another issue at the pool.mn

We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.

Findblocks disabled, new blocks will currently not show up in the frontend
Blockupdate disabled, blocks and transactions confirmations are delayed
Payouts disabled, you will not receive any coins to your offline wallet for the time being

Claymore, when the SOLO VERSION is ARRIVE ? Btw, it will be only ETH solo mode/DCR-pools or we can choose the both SOLO?

I spent a lot of time for removing DAG files. So it will be a couple of days later than I planned. But I'm working on it.
Not sure about DCR yet, probably first solo version will mine ETH solo and DCR on pools.

[madmartyk]

Man, give Claymore a break...  The poor guy has been working his ass off!!!  Give him a breather!!

[qqqq]

Another issue at the pool.mn

We are investingating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.

Findblocks disabled, new blocks will currently not show up in the frontend
Blockupdate disabled, blocks and transactions confirmations are delayed
Payouts disabled, you will not receive any coins to your offline wallet for the time being

Claymore, when the SOLO VERSION is ARRIVE ? Btw, it will be only ETH solo mode/DCR-pools or we can choose the both SOLO?

I spent a lot of time for removing DAG files. So it will be a couple of days later than I planned. But I'm working on it.
Not sure about DCR yet, probably first solo version will mine ETH solo and DCR on pools.

Thank you, will be waiting.

Man, give Claymore a break...  The poor guy has been working his ass off!!!  Give him a breather!!

I'm just asking.

[Eyedol-X]

First I want to say, great miner -- Nicely done Claymore.

Been reading about this for a few weeks and just fired it off on my rig last night so version 4.0 is the first version I have used.

4.0 mined all night then for whatever reason this morning, just stopped mining but GPU loads and Miner reported hash rate remained unchanged.

I noticed after 2 hours the pool indicated the effective hash rate was 0 but the miner was still reporting an unchanged hash rate to the pool.

I quit/relaunched the miner and didn't see a change within a few minutes, so I switched to a different miner (without rebooting) and it started up just fine.
----Note: I may not have waited long enough for the pool to update its reporting before I switched miners.

Don't know if this information helps you or the community but I figured I would share it.

System specs as of right now
Windows 10 X64
2x R9 380X
Crimson 15.12 Drivers

[Claymore]

First I want to say, great miner -- Nicely done Claymore.

Been reading about this for a few weeks and just fired it off on my rig last night so version 4.0 is the first version I have used.

4.0 mined all night then for whatever reason this morning, just stopped mining but GPU loads and Miner reported hash rate remained unchanged.

I noticed after 2 hours the pool indicated the effective hash rate was 0 but the miner was still reporting an unchanged hash rate to the pool.

I quit/relaunched the miner and didn't see a change within a few minutes, so I switched to a different miner (without rebooting) and it started up just fine.
----Note: I may not have waited long enough for the pool to update its reporting before I switched miners.

Don't know if this information helps you or the community but I figured I would share it.

System specs as of right now
Windows 10 X64
2x R9 380X
Crimson 15.12 Drivers

Miner shows goot hashrate, so it must send shares, but pool shows zero rate? PM me log file and command line that you use.

[citronick]

v4 report

1. ran v4 B1, whole day and running well - quicker I feel vs previous versions.
2. I accidentally ran a HODL batch file and in dual miner's console, I witness a "GPU 0 hang" and "restarting miner - ok" error msgs, but continued on as per normal, however after a few minutes I could see that the dual miner has slowed down.
3. Since HODL is CPU mining, it doesn't impact GPU ETH or DCR mining _ I am assuming, the starting of miner message and eventual slow down maybe dual-miner related bug.
4. The other conclusion is the HODL process is just taking all the CPU juice and impacts the DOS box.
5. just for feedback to Claymore, pls look into it if the points above makes sense for your troubleshooting.

[sp_]

The dag was generated in 3,5 secs on the r9 nano. No more cpu fuck and hardisk spinning. Good job Claymore!

[Rux]

claymore, now that we dont have dag's any more... can you tell is there now a limit for minimum memory on graphics?

sorry for noobish q

edit:
Posted by: sp_
Insert Quote
The dag was generated in 3,5 secs on the r9 nano. No more cpu fuck and hardisk spinning. Good job Claymore!

whats the location of dags?

[revelacaogr]

Someone please help me I am having a time with how to use the wallet. I got a wallet address but I can't find a working GUI so I can actually manage my coins.  I tried Decred Wallet Beta 0.7 but it's just a blank damn window.

The main thread is here: https://bitcointalk.org/index.php?topic=1290358.0
Decred forum here: https://forum.decred.org/
Direct link to a wallet guide: https://forum.decred.org/threads/prerequisites-for-mainnet-unofficial-airdrop-import-mining-guide-use-at-your-own-risk.472/

also this can help u

Windows Guide :
On Windows, you need to execute each command with a different BAT file. There’s no way, for the moment, to use any kind of terminal.

First of all, you’ll need to download the latest binaries available at : https://github.com/decred/dcrd/releases

This zip file  include all the Windows Instructions for an easy setup.
http://thecryptoworld.org/decred-get-started

This file include :
How to setup your server (dcrd)
How to create your wallet (dcrwallet)
How to connect with your wallet
How to get your decred wallet address
How to start Proof-Of-Stake by buying tickets
How to unlock your wallet

[Narosya]

claymore, now that we dont have dag's any more... can you tell is there now a limit for minimum memory on graphics?

sorry for noobish q

edit:
Posted by: sp_
Insert Quote
The dag was generated in 3,5 secs on the r9 nano. No more cpu fuck and hardisk spinning. Good job Claymore!

whats the location of dags?

You still need at least 2GB graphics as the DAG is stored in the graphics as before. You might not need big system memory.

[Rux]

claymore, now that we dont have dag's any more... can you tell is there now a limit for minimum memory on graphics?

sorry for noobish q

edit:
Posted by: sp_
Insert Quote
The dag was generated in 3,5 secs on the r9 nano. No more cpu fuck and hardisk spinning. Good job Claymore!

whats the location of dags?

You still need at least 2GB graphics as the DAG is stored in the graphics as before. You might not need big system memory.

makes sense...

thanks for clarification

[sp_]

whats the location of dags?

Claymore has ported the Dag creation code from the cpu to the gpu. So instead of making a file on the harddrive, the gpu generate the file in 3.5 seconds directly into the gpu ram. This is using less power, much quicker, and much bether for slow cpu rigs. (celerons)