Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[PPOC]

Thanks for the info, very helpful. So in your opinion, I should use ethminer doing solo on my Geth? Even though CMD give me a higher hash rate? With either I get 103mh on 1 rig, with CMD I get 120mh. With all my hw, using Ethminer its 460mh, with CMD its 550Mh. Considerable difference.

Thanks,

Like all mining I think it is going to be luck that rules on this one. You could possibly have found an eth block in that 14.4 minutes a day that CMD is mining the dev fee. Mining Shift with only 50-60mh I have found that the 36 seconds doesn't really affect me. I get more from CMD on average than I do etherminer.  If I had the hash-rate to mine Ethereum solo I might feel differently.

So I just tested using just Ethminer pointed to my Geth box in solo, looks like avg is 75Mh. This rig has 4 GPU's that usually run 102mh on a pool using ethminer and 120mh on a pool using CDM.

I get the luck factor in solo mining, but loosing that much hash compared to CDM has got to make a difference. Based on calculators I should be getting a block per day with my 550mh using CDM. But with this Ethminer avg below, total hash is only 342Mh.

Thoughts?


miner  21:38:33|main  Mining on PoWhash #8f049772ΓǪ : 74162546 H/s = 37748736 hashes / 0.509 s
miner  21:38:34|main  Mining on PoWhash #8f049772ΓǪ : 73647528 H/s = 37486592 hashes / 0.509 s
miner  21:38:34|main  Mining on PoWhash #8f049772ΓǪ : 76073160 H/s = 38797312 hashes / 0.51 s
miner  21:38:35|main  Mining on PoWhash #8f049772ΓǪ : 72617493 H/s = 36962304 hashes / 0.509 s
miner  21:38:35|main  Mining on PoWhash #8f049772ΓǪ : 74824566 H/s = 38010880 hashes / 0.508 s
miner  21:38:36|main  Mining on PoWhash #8f049772ΓǪ : 74677563 H/s = 38010880 hashes / 0.509 s
DAG  21:38:36|<unknown>  Generating DAG file. Progress: 16 %
miner  21:38:36|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:37|main  Mining on PoWhash #8f049772ΓǪ : 72475105 H/s = 36962304 hashes / 0.51 s
miner  21:38:37|main  Mining on PoWhash #8f049772ΓǪ : 77252652 H/s = 39321600 hashes / 0.509 s
miner  21:38:38|main  Mining on PoWhash #8f049772ΓǪ : 70557422 H/s = 35913728 hashes / 0.509 s
miner  21:38:38|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:39|main  Mining on PoWhash #8f049772ΓǪ : 75707599 H/s = 38535168 hashes / 0.509 s
miner  21:38:39|main  Mining on PoWhash #8f049772ΓǪ : 74017129 H/s = 37748736 hashes / 0.51 s
miner  21:38:40|main  Mining on PoWhash #8f049772ΓǪ : 74385283 H/s = 38010880 hashes / 0.511 s
miner  21:38:41|main  Mining on PoWhash #8f049772ΓǪ : 75776000 H/s = 38797312 hashes / 0.512 s
miner  21:38:41|main  Mining on PoWhash #8f049772ΓǪ : 70933082 H/s = 36175872 hashes / 0.51 s
miner  21:38:42|main  Mining on PoWhash #8f049772ΓǪ : 75707599 H/s = 38535168 hashes / 0.509 s
miner  21:38:42|main  Mining on PoWhash #8f049772ΓǪ : 74677563 H/s = 38010880 hashes / 0.509 s
miner  21:38:43|main  Mining on PoWhash #8f049772ΓǪ : 75192581 H/s = 38273024 hashes / 0.509 s
miner  21:38:43|main  Mining on PoWhash #8f049772ΓǪ : 72989113 H/s = 37224448 hashes / 0.51 s
DAG  21:38:43|<unknown>  Generating DAG file. Progress: 17 %
miner  21:38:44|main  Mining on PoWhash #8f049772ΓǪ : 76073160 H/s = 38797312 hashes / 0.51 s
miner  21:38:44|main  Mining on PoWhash #8f049772ΓǪ : 70557422 H/s = 35913728 hashes / 0.509 s
miner  21:38:45|main  Mining on PoWhash #8f049772ΓǪ : 75559152 H/s = 38535168 hashes / 0.51 s
miner  21:38:45|main  Mining on PoWhash #8f049772ΓǪ : 74531137 H/s = 38010880 hashes / 0.51 s
miner  21:38:46|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:46|main  Mining on PoWhash #8f049772ΓǪ : 73647528 H/s = 37486592 hashes / 0.509 s

[1714158320]

1714158320

[1714158320]

1714158320

[Patrice7]

Thanks for the info, very helpful. So in your opinion, I should use ethminer doing solo on my Geth? Even though CMD give me a higher hash rate? With either I get 103mh on 1 rig, with CMD I get 120mh. With all my hw, using Ethminer its 460mh, with CMD its 550Mh. Considerable difference.

Thanks,

Like all mining I think it is going to be luck that rules on this one. You could possibly have found an eth block in that 14.4 minutes a day that CMD is mining the dev fee. Mining Shift with only 50-60mh I have found that the 36 seconds doesn't really affect me. I get more from CMD on average than I do etherminer.  If I had the hash-rate to mine Ethereum solo I might feel differently.

So I just tested using just Ethminer pointed to my Geth box in solo, looks like avg is 75Mh. This rig has 4 GPU's that usually run 102mh on a pool using ethminer and 120mh on a pool using CDM.

I get the luck factor in solo mining, but loosing that much hash compared to CDM has got to make a difference. Based on calculators I should be getting a block per day with my 550mh using CDM. But with this Ethminer avg below, total hash is only 342Mh.

Thoughts?


miner  21:38:33|main  Mining on PoWhash #8f049772ΓǪ : 74162546 H/s = 37748736 hashes / 0.509 s
miner  21:38:34|main  Mining on PoWhash #8f049772ΓǪ : 73647528 H/s = 37486592 hashes / 0.509 s
miner  21:38:34|main  Mining on PoWhash #8f049772ΓǪ : 76073160 H/s = 38797312 hashes / 0.51 s
miner  21:38:35|main  Mining on PoWhash #8f049772ΓǪ : 72617493 H/s = 36962304 hashes / 0.509 s
miner  21:38:35|main  Mining on PoWhash #8f049772ΓǪ : 74824566 H/s = 38010880 hashes / 0.508 s
miner  21:38:36|main  Mining on PoWhash #8f049772ΓǪ : 74677563 H/s = 38010880 hashes / 0.509 s
DAG  21:38:36|<unknown>  Generating DAG file. Progress: 16 %
miner  21:38:36|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:37|main  Mining on PoWhash #8f049772ΓǪ : 72475105 H/s = 36962304 hashes / 0.51 s
miner  21:38:37|main  Mining on PoWhash #8f049772ΓǪ : 77252652 H/s = 39321600 hashes / 0.509 s
miner  21:38:38|main  Mining on PoWhash #8f049772ΓǪ : 70557422 H/s = 35913728 hashes / 0.509 s
miner  21:38:38|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:39|main  Mining on PoWhash #8f049772ΓǪ : 75707599 H/s = 38535168 hashes / 0.509 s
miner  21:38:39|main  Mining on PoWhash #8f049772ΓǪ : 74017129 H/s = 37748736 hashes / 0.51 s
miner  21:38:40|main  Mining on PoWhash #8f049772ΓǪ : 74385283 H/s = 38010880 hashes / 0.511 s
miner  21:38:41|main  Mining on PoWhash #8f049772ΓǪ : 75776000 H/s = 38797312 hashes / 0.512 s
miner  21:38:41|main  Mining on PoWhash #8f049772ΓǪ : 70933082 H/s = 36175872 hashes / 0.51 s
miner  21:38:42|main  Mining on PoWhash #8f049772ΓǪ : 75707599 H/s = 38535168 hashes / 0.509 s
miner  21:38:42|main  Mining on PoWhash #8f049772ΓǪ : 74677563 H/s = 38010880 hashes / 0.509 s
miner  21:38:43|main  Mining on PoWhash #8f049772ΓǪ : 75192581 H/s = 38273024 hashes / 0.509 s
miner  21:38:43|main  Mining on PoWhash #8f049772ΓǪ : 72989113 H/s = 37224448 hashes / 0.51 s
DAG  21:38:43|<unknown>  Generating DAG file. Progress: 17 %
miner  21:38:44|main  Mining on PoWhash #8f049772ΓǪ : 76073160 H/s = 38797312 hashes / 0.51 s
miner  21:38:44|main  Mining on PoWhash #8f049772ΓǪ : 70557422 H/s = 35913728 hashes / 0.509 s
miner  21:38:45|main  Mining on PoWhash #8f049772ΓǪ : 75559152 H/s = 38535168 hashes / 0.51 s
miner  21:38:45|main  Mining on PoWhash #8f049772ΓǪ : 74531137 H/s = 38010880 hashes / 0.51 s
miner  21:38:46|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:46|main  Mining on PoWhash #8f049772ΓǪ : 73647528 H/s = 37486592 hashes / 0.509 s

I would go with CMD.  Looking at the numbers I would have to believe that the significantly higher hash rate and processing more work would outweigh the off chance that you would have found a block in the time CMD is mining the dev fee. In the long run you might miss a block or two but should come out ahead due to the 60%+ increase in hashing power.

[PPOC]

Thanks for the info, very helpful. So in your opinion, I should use ethminer doing solo on my Geth? Even though CMD give me a higher hash rate? With either I get 103mh on 1 rig, with CMD I get 120mh. With all my hw, using Ethminer its 460mh, with CMD its 550Mh. Considerable difference.

Thanks,

Like all mining I think it is going to be luck that rules on this one. You could possibly have found an eth block in that 14.4 minutes a day that CMD is mining the dev fee. Mining Shift with only 50-60mh I have found that the 36 seconds doesn't really affect me. I get more from CMD on average than I do etherminer.  If I had the hash-rate to mine Ethereum solo I might feel differently.

So I just tested using just Ethminer pointed to my Geth box in solo, looks like avg is 75Mh. This rig has 4 GPU's that usually run 102mh on a pool using ethminer and 120mh on a pool using CDM.

I get the luck factor in solo mining, but loosing that much hash compared to CDM has got to make a difference. Based on calculators I should be getting a block per day with my 550mh using CDM. But with this Ethminer avg below, total hash is only 342Mh.

Thoughts?


miner  21:38:33|main  Mining on PoWhash #8f049772ΓǪ : 74162546 H/s = 37748736 hashes / 0.509 s
miner  21:38:34|main  Mining on PoWhash #8f049772ΓǪ : 73647528 H/s = 37486592 hashes / 0.509 s
miner  21:38:34|main  Mining on PoWhash #8f049772ΓǪ : 76073160 H/s = 38797312 hashes / 0.51 s
miner  21:38:35|main  Mining on PoWhash #8f049772ΓǪ : 72617493 H/s = 36962304 hashes / 0.509 s
miner  21:38:35|main  Mining on PoWhash #8f049772ΓǪ : 74824566 H/s = 38010880 hashes / 0.508 s
miner  21:38:36|main  Mining on PoWhash #8f049772ΓǪ : 74677563 H/s = 38010880 hashes / 0.509 s
DAG  21:38:36|<unknown>  Generating DAG file. Progress: 16 %
miner  21:38:36|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:37|main  Mining on PoWhash #8f049772ΓǪ : 72475105 H/s = 36962304 hashes / 0.51 s
miner  21:38:37|main  Mining on PoWhash #8f049772ΓǪ : 77252652 H/s = 39321600 hashes / 0.509 s
miner  21:38:38|main  Mining on PoWhash #8f049772ΓǪ : 70557422 H/s = 35913728 hashes / 0.509 s
miner  21:38:38|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:39|main  Mining on PoWhash #8f049772ΓǪ : 75707599 H/s = 38535168 hashes / 0.509 s
miner  21:38:39|main  Mining on PoWhash #8f049772ΓǪ : 74017129 H/s = 37748736 hashes / 0.51 s
miner  21:38:40|main  Mining on PoWhash #8f049772ΓǪ : 74385283 H/s = 38010880 hashes / 0.511 s
miner  21:38:41|main  Mining on PoWhash #8f049772ΓǪ : 75776000 H/s = 38797312 hashes / 0.512 s
miner  21:38:41|main  Mining on PoWhash #8f049772ΓǪ : 70933082 H/s = 36175872 hashes / 0.51 s
miner  21:38:42|main  Mining on PoWhash #8f049772ΓǪ : 75707599 H/s = 38535168 hashes / 0.509 s
miner  21:38:42|main  Mining on PoWhash #8f049772ΓǪ : 74677563 H/s = 38010880 hashes / 0.509 s
miner  21:38:43|main  Mining on PoWhash #8f049772ΓǪ : 75192581 H/s = 38273024 hashes / 0.509 s
miner  21:38:43|main  Mining on PoWhash #8f049772ΓǪ : 72989113 H/s = 37224448 hashes / 0.51 s
DAG  21:38:43|<unknown>  Generating DAG file. Progress: 17 %
miner  21:38:44|main  Mining on PoWhash #8f049772ΓǪ : 76073160 H/s = 38797312 hashes / 0.51 s
miner  21:38:44|main  Mining on PoWhash #8f049772ΓǪ : 70557422 H/s = 35913728 hashes / 0.509 s
miner  21:38:45|main  Mining on PoWhash #8f049772ΓǪ : 75559152 H/s = 38535168 hashes / 0.51 s
miner  21:38:45|main  Mining on PoWhash #8f049772ΓǪ : 74531137 H/s = 38010880 hashes / 0.51 s
miner  21:38:46|main  Mining on PoWhash #8f049772ΓǪ : 75045145 H/s = 38273024 hashes / 0.51 s
miner  21:38:46|main  Mining on PoWhash #8f049772ΓǪ : 73647528 H/s = 37486592 hashes / 0.509 s

I would go with CMD.  Looking at the numbers I would have to believe that the significantly higher hash rate and processing more work would outweigh the off chance that you would have found a block in the time CMD is mining the dev fee. In the long run you might miss a block or two but should come out ahead due to the 60%+ increase in hashing power.

Same rig running CMD below. Maybe Claymore will offer a paid version of the miner? Geared toward solo miners that don't want to take the DevFee time away.


GPU 1 DAG creation time 5162 ms
Setting DAG epoch #51 for GPU #1 done
GPU 0 DAG creation time 5187 ms
Setting DAG epoch #51 for GPU #0 done
GPU 3 DAG creation time 5280 ms
Setting DAG epoch #51 for GPU #3 done
GPU 2 DAG creation time 5288 ms
Setting DAG epoch #51 for GPU #2 done
ETH: 05/19/16-22:13:45 - New job (target 0x0000000000070250) from 10.110.150.88:8545
ETH - Total Speed: 121.992 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 30.493 Mh/s, GPU1 30.524 Mh/s, GPU2 30.478 Mh/s, GPU3 30.496 Mh/s
ETH: 05/19/16-22:13:59 - New job (target 0x0000000000070170) from 10.110.150.88:8545
ETH - Total Speed: 121.920 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 30.506 Mh/s, GPU1 30.471 Mh/s, GPU2 30.469 Mh/s, GPU3 30.473 Mh/s
GPU0 t=57C fan=0%
ETH: 05/19/16-22:14:11 - New job (target 0x0000000000070170) from 10.110.150.88:8545
ETH - Total Speed: 122.086 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 30.544 Mh/s, GPU1 30.529 Mh/s, GPU2 30.515 Mh/s, GPU3 30.498 Mh/s
GPU0 t=61C fan=0%
ETH: 05/19/16-22:14:45 - New job (target 0x0000000000070330) from 10.110.150.88:8545
ETH - Total Speed: 121.990 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 30.514 Mh/s, GPU1 30.510 Mh/s, GPU2 30.472 Mh/s, GPU3 30.495 Mh/s

[elzium]

If u find a block, it doesnt mean that for some time your odds are lower. U dont gather up the work to get sometimes paid or have to be 100% online to hit the right moment, the probability of findinga a block is still the same whether u did find one minute ago or not. So devfee does nothing but lowers ur effective hashrate. But of course its hard to believe if u see the hit in "wrong" time with your own eyes.

[PPOC]

If u find a block, it doesnt mean that for some time your odds are lower. U dont gather up the work to get sometimes paid or have to be 100% online to hit the right moment, the probability of findinga a block is still the same whether u did find one minute ago or not. So devfee does nothing but lowers ur effective hashrate. But of course its hard to believe if u see the hit in "wrong" time with your own eyes.

Other then checking Geth main account balance, or monitoring your wallet address. Any other way to see you found a block? will anything show on the console or a Geth command that may show blocks solves or possible solves?

[Balbec]

Blockchain syncing from scratch is the worst thing in solo. 18 gigs ((.

If you want more hashrate using DCR-combined advantages - simply add DCR-mining "channel" with provided miner readme (RTFM guys, it's profit Maybe there are some security issues (open additional ports etc).

Geth have a few unwanted holes. One reports 100 DAO costs him all his eth with Mist and Geth (1 ETH for tokens, rest of 7,2k was stolen). Botnets work 24/7. Don't forget it.

[citronick]

Blockchain syncing from scratch is the worst thing in solo. 18 gigs ((.

If you want more hashrate using DCR-combined advantages - simply add DCR-mining "channel" with provided miner readme (RTFM guys, it's profit Maybe there are some security issues (open additional ports etc).

Geth have a few unwanted holes. One reports 100 DAO costs him all his eth with Mist and Geth (1 ETH for tokens, rest of 7,2k was stolen). Botnets work 24/7. Don't forget it.

there is a geth "--fast" switch that can do entire synch in less than 30 mins from scratch.
I had to do this on a new PC a few weeks ago, and was quite surprised on how fast it was.

[Claymore]

And by the way, I wouldn't use CDM to solo mine. When you solo mine, you don't want 36 or 72 seconds per hour not mining for yourself because in this time it can be when you're gonna hit a block. If you are pool mining then it is ok because shares you will be hitting a lot anyway. I'll give you an example: a few months ago when I was still solo mining, I was gonna stop one of my rigs and in the time between hitting CTRL and C this rig found one block.

Your logic is incorrect. Miner will send 1% or 2% of mining time anyway - pool or solo modes. Probability to find the block in solo mining when miner is busy in devfee mining is the same 1% or 2%.
So check your math again.

[Claymore]

So does the miner stop mining when a new block is found or only when its submitting a share?

For solo minig mode every share in the miner means a block because share target = block target. Miner will continue mining when block is found, exactly as it works in pool mode.

[Claymore]

Hi it seems that eth_submitHashrate in eth-proxy mode is lacking the worker parameter:

Code:

{"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x7b64145", "0x000000000000000000000000000000000000000000000000000000009ff1e5fb"]}

While a request from eth proxy for eth_submitHahrate looks like this (when worker ids are enabled):

Code:

{"id":6,"worker": "rig1","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x7b64145", "0x000000000000000000000000000000000000000000000000000000009ff1e5fb"]}

Maybe you could add the worker param to the request if it is set.

Ok I will do it.

[malandante]

And by the way, I wouldn't use CDM to solo mine. When you solo mine, you don't want 36 or 72 seconds per hour not mining for yourself because in this time it can be when you're gonna hit a block. If you are pool mining then it is ok because shares you will be hitting a lot anyway. I'll give you an example: a few months ago when I was still solo mining, I was gonna stop one of my rigs and in the time between hitting CTRL and C this rig found one block.

Your logic is incorrect. Miner will send 1% or 2% of mining time anyway - pool or solo modes. Probability to find the block in solo mining when miner is busy in devfee mining is the same 1% or 2%.
So check your math again.

You're right in the probability thing. What I mean is that unless you have a huge hashrate and are solo finding blocks all the time, the situation is not like in pool mining. I miss a share in devfee time when pool mining and I don't care because it will even out in no time. I miss a block in solo mining and it will take ages to even out. And meanwhile the difficulty will be raising making the chance to even out smaller. Unless you have a huge hashrate, as I said. Please correct me if my thoughts are wrong.

[malandante]

Connects, looks like it starts mining and Geth console shows the connection. But not seeing any shares? only temps and new jobs. On pool, i'm seeing accepted shares almost instantly. Doing something wrong here?

ETH: 05/19/16-17:44:09 - New job (target 0x000000000006f68d) from localhost:8545

I didn't try solo mining. But I guess that with solo mode your "share" means to be a block solution. With such difficulty difference (compare yours and pool ones) and your hashrate you should mine few days, maybe a week on average, to find a block. I think so, but might be wrong.

I actually have 600mh of miners that I want to solo mine, but so far only the local box running Geth is connecting my GPU's and that's the 120mh you see here. Tried pointing my other rigs to this Geth box and getting failure to connect messages. I would think I should still see accepted shares as rarely are they blocks on a pool. I avg 450 accepted shares per hour on a pool like Nano, so I was expecting to see similar results solo mining.

The not connecting is most likely because you set rpc to 127.0.0.1 and then geth only accepts connections from the same machine. Use the local ip instead.

And by the way, I wouldn't use CDM to solo mine. When you solo mine, you don't want 36 or 72 seconds per hour not mining for yourself because in this time it can be when you're gonna hit a block. If you are pool mining then it is ok because shares you will be hitting a lot anyway. I'll give you an example: a few months ago when I was still solo mining, I was gonna stop one of my rigs and in the time between hitting CTRL and C this rig found one block.

Thanks for the info, very helpful. So in your opinion, I should use ethminer doing solo on my Geth? Even though CMD give me a higher hash rate? With either I get 103mh on 1 rig, with CMD I get 120mh. With all my hw, using Ethminer its 460mh, with CMD its 550Mh. Considerable difference.

Thanks,

In your case with this hashrate increase it pays off to use CDM. My thoughts are right or maybe wrong, I tried to clarify them in the post above.

[osnwt]

I think that the probability to get a block in 1-2% of time is compensated by increased probability to find it in the remaining 98-99% of time due to higher hash rate. So it still win. If you miss a block in this 1-2% of time, you just get a new hash to calculate, and the probability to find this one will be exactly the same. So as soon as your average hash rate (in 100% of time) is higher, you win.

[Claymore]

And by the way, I wouldn't use CDM to solo mine. When you solo mine, you don't want 36 or 72 seconds per hour not mining for yourself because in this time it can be when you're gonna hit a block. If you are pool mining then it is ok because shares you will be hitting a lot anyway. I'll give you an example: a few months ago when I was still solo mining, I was gonna stop one of my rigs and in the time between hitting CTRL and C this rig found one block.

Your logic is incorrect. Miner will send 1% or 2% of mining time anyway - pool or solo modes. Probability to find the block in solo mining when miner is busy in devfee mining is the same 1% or 2%.
So check your math again.

You're right in the probability thing. What I mean is that unless you have a huge hashrate and are solo finding blocks all the time, the situation is not like in pool mining. I miss a share in devfee time when pool mining and I don't care because it will even out in no time. I miss a block in solo mining and it will take ages to even out. And meanwhile the difficulty will be raising making the chance to even out smaller. Unless you have a huge hashrate, as I said. Please correct me if my thoughts are wrong.

I can only say the same: Probability to miss the block in solo mining when miner is busy in devfee mining is the same - 1% or 2%. Not more.
In your point of view, you afraid that you can miss the block. Yes you can miss it, but probability is 1-2%.
But for the rest of time (98%-99%) you pay nothing for devfee at all because you would check weak hashes anyway.

About slow/huge hashrate: if you mine solo with slow hashrate to find one block, probability to miss it due to devfee mining is the same - 1-2%. Of course if you are very unlucky (1-2%), you can miss it immediately. But if you are unlucky, you can also search for a block forever. It is not a devfee problem, it is a problem of bad luck. On other side, if you are lucky a bit (98-99%), you will lose absolutely nothing for devfee in solo mode.

[DDSZ]

It would be cool to have ping in remote manager
Anyway, thank you for it.
Made a small PHP thing for myself
http://jpegshare.net/images/78/98/7898354c3131913d0949dd1fc61a90bf.png

[Claymore]

It would be cool to have ping in remote manager
Anyway, thank you for it.
Made a small PHP thing for myself

If miner is not available, it becomes red. Why do you need ping?

[DDSZ]

It would be cool to have ping in remote manager
Anyway, thank you for it.
Made a small PHP thing for myself
http://jpegshare.net/images/78/98/7898354c3131913d0949dd1fc61a90bf.png

If miner is not available, it becomes red. Why do you need ping?

I mean the ping that shows in miner when share was accepted.

[Gagana]

4. can you add rig parameters like, CPU, RAM, GPU type etc.

haha... new bot-net soon will be created?
if rig urs - u know rig configs.

If you have 20+ rigs, then you don't remember configs.

[elzium]

And by the way, I wouldn't use CDM to solo mine. When you solo mine, you don't want 36 or 72 seconds per hour not mining for yourself because in this time it can be when you're gonna hit a block. If you are pool mining then it is ok because shares you will be hitting a lot anyway. I'll give you an example: a few months ago when I was still solo mining, I was gonna stop one of my rigs and in the time between hitting CTRL and C this rig found one block.

Your logic is incorrect. Miner will send 1% or 2% of mining time anyway - pool or solo modes. Probability to find the block in solo mining when miner is busy in devfee mining is the same 1% or 2%.
So check your math again.

You're right in the probability thing. What I mean is that unless you have a huge hashrate and are solo finding blocks all the time, the situation is not like in pool mining. I miss a share in devfee time when pool mining and I don't care because it will even out in no time. I miss a block in solo mining and it will take ages to even out. And meanwhile the difficulty will be raising making the chance to even out smaller. Unless you have a huge hashrate, as I said. Please correct me if my thoughts are wrong.

Thats where you wrong, it takes no time to recover after finding a block, chances stay the same. Considering that, looks like u mind paying a fee.


citronic, thats what miner names are for. Like m1 2x290x, m2 6x370

[Alehandros]

Set up two identical rigs, one with the latest catalyst drivers and one with the recommended v15.12, it would seem after 24 hrs that the v15.12 drivers are outperforming the latest drivers.

Cards are R9 Nano's.

..is this the expected result?