-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 09:41:43 PM |
|
CGMiner seems to be randomly closing. I'm running cgminer-nogpu on Win 8x64 with a BFL Little Single and 2 AMUs. It runs in a batch file that loops, and the batch file keeps restarting it, so it is closing nicely, and I haven't lost any downtime. I think it's done it about 4-5 times since I updated to 3.4.0, which was about 8 days ago? The newest one was this morning, after I had left for work. It had been running for about 2 days solid before that.
It never did this before. The AMUs are pretty new. Is it the AMUs causing it, or upgrading to 3.4.0, or both?
Hard to know without excluding one thing at a time? Try running the AMUs in their own instance and see if one the other or both crashes? Also there are debug builds which would help me find out where it's crashing and fix it. http://ck.kolivas.org/apps/cgminer/debug/
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
miter_myles
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 09:51:40 PM |
|
Any version that uses the new USB drivers eventually crashes on me with mwsock.dll causing the error under Windows ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Update - confirmed after today's crash, same DLL listed above.. I have a copy/paste of the WIN7 report if needed... haven't run the debug build yet.. doesnt look like Ill have time to tinker until next week... I think my latest run went a day and a half..
|
BTC - 1D7g5395bs7idApTx1KTXrfDW7JUgzx6Z5 LTC - LVFukQnCWUimBxZuXKqTVKy1L2Jb8kZasL
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 09:58:55 PM |
|
Any version that uses the new USB drivers eventually crashes on me with mwsock.dll causing the error under Windows ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Update - confirmed after today's crash, same DLL listed above.. I have a copy/paste of the WIN7 report if needed... haven't run the debug build yet.. doesnt look like Ill have time to tinker until next week... I think my latest run went a day and a half.. Hmm... but that's in the networking code, lemme look back at the changelog and see how that code might have been affected.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
miter_myles
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 10:04:51 PM |
|
Not sure if it will help.. Problem signature: Problem Event Name: APPCRASH Application Name: cgminer-nogpu.exe Application Version: 0.0.0.0 Application Timestamp: 5214a24a Fault Module Name: mswsock.dll Fault Module Version: 6.1.7601.17514 Fault Module Timestamp: 4ce7b8e8 Exception Code: c00000fd Exception Offset: 00006ae6 OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 065d Additional Information 2: 065d6303ad9ca09b532367badb2eeeae Additional Information 3: 93ac Additional Information 4: 93acfaaf7fada805f2b80ed090bea700
|
BTC - 1D7g5395bs7idApTx1KTXrfDW7JUgzx6Z5 LTC - LVFukQnCWUimBxZuXKqTVKy1L2Jb8kZasL
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 10:17:29 PM |
|
Not sure if it will help.. Problem signature: Problem Event Name: APPCRASH Application Name: cgminer-nogpu.exe Application Version: 0.0.0.0 Application Timestamp: 5214a24a Fault Module Name: mswsock.dll Fault Module Version: 6.1.7601.17514 Fault Module Timestamp: 4ce7b8e8 Exception Code: c00000fd Exception Offset: 00006ae6 OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 065d Additional Information 2: 065d6303ad9ca09b532367badb2eeeae Additional Information 3: 93ac Additional Information 4: 93acfaaf7fada805f2b80ed090bea700 Hmm doesn't even look like it's crashing in cgminer, but can't tell for sure. Possibly related? : https://community.mcafee.com/thread/36486
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
miter_myles
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 10:21:23 PM |
|
Not sure if it will help.. Problem signature: Problem Event Name: APPCRASH Application Name: cgminer-nogpu.exe Application Version: 0.0.0.0 Application Timestamp: 5214a24a Fault Module Name: mswsock.dll Fault Module Version: 6.1.7601.17514 Fault Module Timestamp: 4ce7b8e8 Exception Code: c00000fd Exception Offset: 00006ae6 OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 065d Additional Information 2: 065d6303ad9ca09b532367badb2eeeae Additional Information 3: 93ac Additional Information 4: 93acfaaf7fada805f2b80ed090bea700 Hmm doesn't even look like it's crashing in cgminer, but can't tell for sure. Possibly related? : https://community.mcafee.com/thread/36486Hmm... using COMODO.. will check it out though and report back... Xian - what virus/firewall s/w do you use?
|
BTC - 1D7g5395bs7idApTx1KTXrfDW7JUgzx6Z5 LTC - LVFukQnCWUimBxZuXKqTVKy1L2Jb8kZasL
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 01:41:08 AM Last edit: August 30, 2013, 05:38:29 AM by Xian01 |
|
Xian - what virus/firewall s/w do you use?
Microsoft Security Essentials. Have not run the debug build yet. I will on next crash. EDIT: 20GH/s rig crashed. Downloaded the cgminer.exe 3.4.0 debug build and started her up.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 06:53:23 AM |
|
Xian - what virus/firewall s/w do you use?
Microsoft Security Essentials. Have not run the debug build yet. I will on next crash. EDIT: 20GH/s rig crashed. Downloaded the cgminer.exe 3.4.0 debug build and started her up. Make sure to set up the debugger as described in the readme in that directory.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
Grim
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 11:42:47 AM |
|
i have
1x 7950 and 1x 7850
i need to set gpu-threads to 1 for my 7950 and i need to set gpu-threads to 2 for my 7850
but it seems like setting
-g 1,2
doesnt work?!?!
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 11:44:48 AM |
|
i have
1x 7950 and 1x 7850
i need to set gpu-threads to 1 for my 7950 and i need to set gpu-threads to 2 for my 7850
but it seems like setting
-g 1,2
doesnt work?!?!
Correct, it doesn't. -g is a global setting.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
Grim
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 11:54:02 AM |
|
so there is no solution for this???
|
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 12:10:29 PM |
|
so there is no solution for this???
Run 2 cgminers ...
|
|
|
|
PinkMouse
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 12:27:55 PM |
|
hello! Cgminer works well with sha256, but with scrypt does not. It shows 850 kH (it's too much, right?), with no sound/submitted shares for 3 hours. Is problem in config or in driver? { "pools" : [ { "url" : "stratum+tcp://127.0.0.1:3333", "user" : "2", "pass" : "x" } ] , "scrypt" : true, "intensity" : "5", "vectors" : "2", "worksize" : "64", "kernel" : "poclbm", "lookup-gap" : "0", "thread-concurrency" : "0", "shaders" : "0", "gpu-engine" : "600-840", "gpu-fan" : "50-100", "gpu-memclock" : "470-900", "gpu-memdiff" : "0", "auto-gpu" : true, "auto-fan" : true, "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "80", "api-port" : "4028", "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "hotplug" : "5", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "temp-hysteresis" : "2", "shares" : "0", "kernel-path" : "/usr/local/bin" }
I have a Radeon Hd4870 512MB+ Catalyst 11.12 + Win XP (1.5G RAM)
|
|
|
|
|
galgitron
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 63
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 12:49:19 PM |
|
Is anybody running more than 50 Erupters successfully with either Windows 7 64-bit cgminer or bfgminer? (latest versions...) If so, how do your erupters appear in Device Manager?
Here's what I finally did to get 181 erupters online in Windows 7 64 1 - Reinstalled the operating system 2 - Installed all the drivers 3 - Installed any and all software 4 - Created a RESTORE POINT (IMPORTANT: Do not insert a single erupter before this point) 5 - staged 10 erupters in their usb slots at a time, up to 100 per bus (don't be fooled by separate ports on your computer, they may still be on the same bus). A high number of USB devices will make your USB buses quite cantankerous and you should allow 30 seconds at least between device stagings 6 - Make sure they are showing up without error under the COM ports in the Device Manager. 7 - launched a separate instance of CGMiner 3.1.1 for 10 erupters each (I find 3.1.1 is much leaner and more stable than later versions) If for any reason I need to bounce my rig, I've found that the COM port allocations get messed up and eventually CGMiner can't find all my miners. To fix this, I actually perform a system restore to my saved restore point. This is the only way that I've been able to guarantee purging of COM port allocations and have a fresh start at step 5 above. T'is a thing of beauty ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Aurum
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 01:44:43 PM |
|
hello! Cgminer works well with sha256, but with scrypt does not. It shows 850 kH (it's too much, right?), with no sound/submitted shares for 3 hours. Is problem in config or in driver? { "pools" : [ { "url" : "stratum+tcp://127.0.0.1:3333", "user" : "2", "pass" : "x" } ] , "scrypt" : true, "intensity" : "5", "vectors" : "2", "worksize" : "64", "kernel" : "poclbm", "lookup-gap" : "0", "thread-concurrency" : "0", "shaders" : "0", "gpu-engine" : "600-840", "gpu-fan" : "50-100", "gpu-memclock" : "470-900", "gpu-memdiff" : "0", "auto-gpu" : true, "auto-fan" : true, "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "80", "api-port" : "4028", "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "hotplug" : "5", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "temp-hysteresis" : "2", "shares" : "0", "kernel-path" : "/usr/local/bin" }
I have a Radeon Hd4870 512MB+ Catalyst 11.12 + Win XP (1.5G RAM) Try this config for starters. Then look here to fine tune: https://en.bitcoin.it/wiki/Mining_hardware_comparison"scrypt" : true, "intensity" : "13", "vectors" : "2", "worksize" : "128", "lookup-gap" : "2", "thread-concurrency" : "4000", "shaders" : "800", "gpu-engine" : "750", "gpu-fan" : "25-100", "gpu-memclock" : "900", "auto-fan" : true, "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "80", "api-port" : "4028", "gpu-threads" : "1", "hotplug" : "0", "log" : "5", "temp-hysteresis" : "6", "shares" : "0", "kernel-path" : "/usr/local/bin"
|
ghghghfgh
|
|
|
rav3n_pl
Legendary
Offline
Activity: 1361
Merit: 1003
Don`t panic! Organize!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 03:07:51 PM |
|
hello! Cgminer works well with sha256, but with scrypt does not. It shows 850 kH (it's too much, right?), with no sound/submitted shares for 3 hours. Is problem in config or in driver? (...) I have a Radeon Hd4870 512MB+ Catalyst 11.12 + Win XP (1.5G RAM)
Probably all HW errors...
|
|
|
|
The00Dustin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 04:28:35 PM |
|
hello! Cgminer works well with sha256, but with scrypt does not. It shows 850 kH (it's too much, right?), with no sound/submitted shares for 3 hours. Is problem in config or in driver? I have a Radeon Hd4870 512MB+ Catalyst 11.12 + Win XP (1.5G RAM) Pretty sure you don't want to use a sha256 kernel when you're scrypt mining. Definitely remove that, also try Aurum's posted advice.
|
|
|
|
KyrosKrane
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 08:01:12 PM |
|
1 - Reinstalled the operating system 2 - Installed all the drivers 3 - Installed any and all software 4 - Created a RESTORE POINT (IMPORTANT: Do not insert a single erupter before this point)
I wonder, would you be able to do this with a virtual machine instead? Create a VM with just Windows 7, cgminer, and the drivers installed, then save the state. Next plug in the miners and do the USB device forwarding. Then, if there's some sort of issue, just reset the virtual machine to the saved state each time. I guess the hard part would just be forwarding 181 USB devices to the virtual machine...
|
|
|
|
Ghost of USD
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 09:18:17 PM |
|
cgminer on my avalon just crashed, and I found this in the kernel log: [375254.850000] miner/0 invoked oom-killer: gfp_mask=0x201da, order=0, oom_score_adj=0 [375254.850000] Call Trace: [375254.850000] [<8006dd8c>] dump_stack+0x8/0x34 [375254.860000] [<800b6b84>] dump_header.isra.16+0x44/0x128 [375254.860000] [<800b6ec8>] oom_kill_process+0xd4/0x3b0 [375254.870000] [<800b7600>] out_of_memory+0x28c/0x2e4 [375254.870000] [<800ba698>] __alloc_pages_nodemask+0x540/0x624 [375254.880000] [<800b6194>] filemap_fault+0x294/0x3e8 [375254.880000] [<800cc380>] __do_fault+0xcc/0x444 [375254.890000] [<800cf1a8>] handle_pte_fault+0x32c/0x6dc [375254.890000] [<800cf608>] handle_mm_fault+0xb0/0xdc [375254.900000] [<80071208>] do_page_fault+0x110/0x354 [375254.900000] [<80060820>] ret_from_exception+0x0/0xc [375254.910000] [375254.910000] Mem-Info: [375254.910000] Normal per-cpu: [375254.920000] CPU 0: hi: 0, btch: 1 usd: 0 [375254.920000] active_anon:4982 inactive_anon:36 isolated_anon:0 [375254.920000] active_file:2 inactive_file:54 isolated_file:0 [375254.920000] unevictable:0 dirty:0 writeback:0 unstable:0 [375254.920000] free:180 slab_reclaimable:232 slab_unreclaimable:784 [375254.920000] mapped:1 shmem:130 pagetables:75 bounce:0 [375254.920000] free_cma:0 [375254.950000] Normal free:720kB min:720kB low:900kB high:1080kB active_anon:19928kB inactive_anon:144kB active_file:8kB inactive_file:216kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:32512kB managed:28856kB mlocked:0kB dirty:0kB writeback:0kB mapped:4kB shmem:520kB slab_reclaimable:928kB slab_unreclaimable:3136kB kernel_stack:392kB pagetables:300kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:88 all_unreclaimable? yes [375254.990000] lowmem_reserve[]: 0 0 [375255.000000] Normal: 0*4kB 0*8kB 1*16kB (R) 0*32kB 1*64kB (R) 1*128kB (R) 0*256kB 1*512kB (R) 0*1024kB 0*2048kB 0*4096kB = 720kB [375255.010000] 191 total pagecache pages [375255.010000] 0 pages in swap cache [375255.010000] Swap cache stats: add 0, delete 0, find 0/0 [375255.020000] Free swap = 0kB [375255.020000] Total swap = 0kB [375255.030000] 8192 pages RAM [375255.030000] 921 pages reserved [375255.030000] 30 pages shared [375255.030000] 7014 pages non-shared [375255.040000] [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name [375255.050000] [ 430] 0 430 220 15 3 0 0 ubusd [375255.050000] [ 432] 0 432 192 13 3 0 0 askfirst [375255.060000] [ 534] 0 534 368 44 5 0 0 netifd [375255.070000] [ 624] 0 624 379 22 4 0 0 crond [375255.080000] [ 632] 0 632 289 18 3 0 0 dropbear [375255.090000] [ 648] 0 648 292 28 5 0 0 uhttpd [375255.090000] [ 678] 65534 678 239 22 4 0 0 dnsmasq [375255.100000] [ 690] 0 690 375 18 4 0 0 ntpd [375255.110000] [22605] 0 22605 14642 4592 18 0 0 cgminer [375255.120000] [29206] 0 29206 374 17 4 0 0 sh [375255.130000] [29207] 0 29207 374 17 5 0 0 cgminer-monitor [375255.130000] [29213] 0 29213 374 17 5 0 0 cgminer-monitor [375255.140000] [29214] 0 29214 193 9 3 0 0 cgminer-api [375255.150000] [29215] 0 29215 372 11 3 0 0 grep [375255.160000] Out of memory: Kill process 22605 (cgminer) score 605 or sacrifice child [375255.170000] Killed process 22605 (cgminer) total-vm:58568kB, anon-rss:18368kB, file-rss:0kB
|
|
|
|
|