Bitcoin Forum
November 14, 2018, 11:01:54 PM *
News: Latest Bitcoin Core release: 0.17.0 [Torrent].
 
   Home   Help Search Login Register More  
Pages: « 1 ... 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 [618] 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 ... 846 »
  Print  
Author Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1  (Read 5766296 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.
techman05
Hero Member
*****
Offline Offline

Activity: 546
Merit: 500


View Profile WWW
September 08, 2013, 01:52:42 AM
 #12341

Can I at least mention this program since it came up on google and looked like what would be good for multiple device removal. I hope this helps you with your purge. Just make sure you don't remove any devices you need.

Page describing http://www.thewindowsclub.com/manage-remove-devices-drivers-with-device-remover
Pages for software http://www.pro-it-education.de/software/deviceremover/

Like the info address for potential tips Wink
BTC 1CL5BnNhdL2wDVmSDwMbW1cNhZew87CAPV
* http://www.miningrigrentals.com/register?ref=563
1542236514
Hero Member
*
Offline Offline

Posts: 1542236514

View Profile Personal Message (Offline)

Ignore
1542236514
Reply with quote  #2

1542236514
Report to moderator
1542236514
Hero Member
*
Offline Offline

Posts: 1542236514

View Profile Personal Message (Offline)

Ignore
1542236514
Reply with quote  #2

1542236514
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
miter_myles
Hero Member
*****
Offline Offline

Activity: 742
Merit: 500



View Profile
September 08, 2013, 02:15:17 AM
 #12342

From the debug instance of CGM, regarding that DLL error Xian and myself were getting:

Code:
cgminer-nogpu.exe caused a Stack Overflow at location 6f4e6ae6 in module mswsock.dll.

Registers:
eax=0063ba18 ebx=03a73098 ecx=ff676980 edx=ffffffff esi=03a730a8 edi=00000000
eip=6f4e6ae6 esp=03a73000 ebp=03a730f8 iopl=0         nv up ei pl zr na po nc
cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246

Call stack:
6F4E6AE6  mswsock.dll:6F4E6AE6
75896A28  WS2_32.dll:75896A28  select
00423DD7  cgminer-nogpu.exe:00423DD7
00423FA0  cgminer-nogpu.exe:00423FA0
004134D5  cgminer-nogpu.exe:004134D5
0049915B  cgminer-nogpu.exe:0049915B
74E81287  msvcrt.dll:74E81287  _itow_s
74E81328  msvcrt.dll:74E81328  _endthreadex
768733AA  kernel32.dll:768733AA  BaseThreadInitThunk
772C9F72  ntdll.dll:772C9F72  RtlInitializeExceptionChain
772C9F45  ntdll.dll:772C9F45  RtlInitializeExceptionChain

BTC - 1D7g5395bs7idApTx1KTXrfDW7JUgzx6Z5
LTC - LVFukQnCWUimBxZuXKqTVKy1L2Jb8kZasL
techman05
Hero Member
*****
Offline Offline

Activity: 546
Merit: 500


View Profile WWW
September 08, 2013, 12:42:04 PM
 #12343

From the debug instance of CGM, regarding that DLL error Xian and myself were getting:

Code:
cgminer-nogpu.exe caused a Stack Overflow at location 6f4e6ae6 in module mswsock.dll.

Registers:
eax=0063ba18 ebx=03a73098 ecx=ff676980 edx=ffffffff esi=03a730a8 edi=00000000
eip=6f4e6ae6 esp=03a73000 ebp=03a730f8 iopl=0         nv up ei pl zr na po nc
cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246

Call stack:
6F4E6AE6  mswsock.dll:6F4E6AE6
75896A28  WS2_32.dll:75896A28  select
00423DD7  cgminer-nogpu.exe:00423DD7
00423FA0  cgminer-nogpu.exe:00423FA0
004134D5  cgminer-nogpu.exe:004134D5
0049915B  cgminer-nogpu.exe:0049915B
74E81287  msvcrt.dll:74E81287  _itow_s
74E81328  msvcrt.dll:74E81328  _endthreadex
768733AA  kernel32.dll:768733AA  BaseThreadInitThunk
772C9F72  ntdll.dll:772C9F72  RtlInitializeExceptionChain
772C9F45  ntdll.dll:772C9F45  RtlInitializeExceptionChain

I see mswsock and I think network card. Maybe you can find the drivers for your network card and go through and repair or reinstall the device. You could have overridden something accidentally when you were trying to clear out your devices.

Like the info address for potential tips Wink
BTC 1CL5BnNhdL2wDVmSDwMbW1cNhZew87CAPV
* http://www.miningrigrentals.com/register?ref=563
DrGuns4Hands
Hero Member
*****
Offline Offline

Activity: 910
Merit: 550


Global Crypto Offering Exchange


View Profile
September 08, 2013, 01:28:02 PM
 #12344

Running 7 Single SC's on a Raspberry pi. I have to use 3.3.4, because 3.4.1 would crash out with no warnings. 3.4.2 made it better but 2 of the singles will go Zombie over the course of a few hours and it says they are detected but something about them being (incorrect device?).

     ▄▄████████▄▄             ▄▄████████▄▄             ▄▄████████▄▄      ██ ██ ██           ██ ██ 
   ▄████▀▀▀▀▀▀████▄         ▄████▀▀▀▀▀▀████▄         ▄████▀▀▀▀▀▀████▄      ██  █ ██        ██ ██   
  ███▀          ▀███       ███▀          ▀███▌      ███▀          ▀███▌    ██ ██ ██     ██ ██     
 ███                      ███              ███     ███              ███      ██ █  ██ ██ ██       
▐██▌                     ▐██▌                     ▐██▌              ▐██▌        █  ██ ██ ██       
███        ▄▄▄▄▄▄▄▄▄▄▄   ███                      ███                ███          ██  ██         
███        ███████████   ███                      ███                ███        ██ ██ ██ ██       
▐██▌              ███▌   ▐██▌               ██▌   ▐██▌              ▐██▌      ██ ██  ██ ██ ██     
 ███▄           ▄████     ███▄            ▄███     ███▄            ▄███      ██ ██     ██ ██ ██   
  ▀████▄▄▄▄▄▄▄▄████▀       ▀███▄▄      ▄▄███▀       ▀███▄▄      ▄▄███▀     ██ ██        ██ ██ ██   
    ▀▀██████████▀▀           ▀▀███████████▀           ▀▀███████████▀      ██ ██           ██ ██ ██

GLOBAL CRYPTO OFFERING EXCHANGE
██████
██████
███
███
███
███
███
███
███
███
███
███
RISE ABOVE!
WHERE POPULARITY IS IMMORTALIZED

███
███
███
███
███
███
███
███
███
███
███
███
.JOIN OUR ICO!.        ▄▄████████▄▄
     ▄████████████████▄
   ▄████████████████████▄
  ███████████████▀▀  █████
 ████████████▀▀      ██████
▐████████▀▀   ▄▄     █████▌
▐████▀▀    ▄█▀▀     ███████▌
▐████████ █▀        ███████▌
 ████████ ▄███▄   ███████
  ████████████████▄▄██████
   ▀████████████████████▀
     ▀████████████████▀
        ▀▀████████▀▀
TWITTER
FACEBOOK
YOUTUBE
kano
Legendary
*
Offline Offline

Activity: 2632
Merit: 1059


Linux since 1997 RedHat 4


View Profile
September 08, 2013, 02:10:58 PM
 #12345

Running 7 Single SC's on a Raspberry pi. I have to use 3.3.4, because 3.4.1 would crash out with no warnings. 3.4.2 made it better but 2 of the singles will go Zombie over the course of a few hours and it says they are detected but something about them being (incorrect device?).

Which OS

Slow to happen problems with USB on RPi are usualy either cable or OS issues.
Look at dmesg and see what happened when they went zombie - most likely the OS.
zombie means the device failed (error -4, -9, -99) but there can be a dmesg saying the OS failed on it also on the RPi

Pool: https://kano.is Here on Bitcointalk: Forum BTC: 1KanoPb8cKYqNrswjaA8cRDk4FAS9eDMLU
FreeNode IRC: irc.freenode.net channel #kano.is Majority developer of the ckpool code
Help keep Bitcoin secure by mining on pools with full block verification on all blocks - and NO empty blocks!
DrGuns4Hands
Hero Member
*****
Offline Offline

Activity: 910
Merit: 550


Global Crypto Offering Exchange


View Profile
September 08, 2013, 02:29:13 PM
 #12346

Raspian 7 "Wheezy" is the OS and they are attached to powered usb hubs the 2 that failed are on different hubs and none of the other devices on those hubs failed. I can run 3.3.4 for days with no issues. 3.4.2 zombies within hours.

     ▄▄████████▄▄             ▄▄████████▄▄             ▄▄████████▄▄      ██ ██ ██           ██ ██ 
   ▄████▀▀▀▀▀▀████▄         ▄████▀▀▀▀▀▀████▄         ▄████▀▀▀▀▀▀████▄      ██  █ ██        ██ ██   
  ███▀          ▀███       ███▀          ▀███▌      ███▀          ▀███▌    ██ ██ ██     ██ ██     
 ███                      ███              ███     ███              ███      ██ █  ██ ██ ██       
▐██▌                     ▐██▌                     ▐██▌              ▐██▌        █  ██ ██ ██       
███        ▄▄▄▄▄▄▄▄▄▄▄   ███                      ███                ███          ██  ██         
███        ███████████   ███                      ███                ███        ██ ██ ██ ██       
▐██▌              ███▌   ▐██▌               ██▌   ▐██▌              ▐██▌      ██ ██  ██ ██ ██     
 ███▄           ▄████     ███▄            ▄███     ███▄            ▄███      ██ ██     ██ ██ ██   
  ▀████▄▄▄▄▄▄▄▄████▀       ▀███▄▄      ▄▄███▀       ▀███▄▄      ▄▄███▀     ██ ██        ██ ██ ██   
    ▀▀██████████▀▀           ▀▀███████████▀           ▀▀███████████▀      ██ ██           ██ ██ ██

GLOBAL CRYPTO OFFERING EXCHANGE
██████
██████
███
███
███
███
███
███
███
███
███
███
RISE ABOVE!
WHERE POPULARITY IS IMMORTALIZED

███
███
███
███
███
███
███
███
███
███
███
███
.JOIN OUR ICO!.        ▄▄████████▄▄
     ▄████████████████▄
   ▄████████████████████▄
  ███████████████▀▀  █████
 ████████████▀▀      ██████
▐████████▀▀   ▄▄     █████▌
▐████▀▀    ▄█▀▀     ███████▌
▐████████ █▀        ███████▌
 ████████ ▄███▄   ███████
  ████████████████▄▄██████
   ▀████████████████████▀
     ▀████████████████▀
        ▀▀████████▀▀
TWITTER
FACEBOOK
YOUTUBE
DrGuns4Hands
Hero Member
*****
Offline Offline

Activity: 910
Merit: 550


Global Crypto Offering Exchange


View Profile
September 08, 2013, 02:47:05 PM
 #12347

I didn't get the dmesg before opening cgminer 3.3.4 to get myself back up and running not sure if that will matter.

dmesg output:

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.6.11+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #514 PREEMPT Tue Jul 30 23:14:45 BST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] cma: CMA: reserved 16 MiB at 1b000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c053d894, node_mem_map c05e7000
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 113792 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0x80ec5b8d smsc95xx.macaddr=B8:27:EB:EC:5B:8D sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 448MB = 448MB total
[    0.000000] Memory: 432256k/432256k available, 26496k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xff000000   ( 552 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04e74d8   (4990 kB)
[    0.000000]       .init : 0xc04e8000 - 0xc0508f44   ( 132 kB)
[    0.000000]       .data : 0xc050a000 - 0xc053e0c0   ( 209 kB)
[    0.000000]        .bss : 0xc053e0e4 - 0xc05e6d18   ( 676 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.001009] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060127] pid_max: default: 32768 minimum: 301
[    0.060461] Mount-cache hash table entries: 512
[    0.061218] Initializing cgroup subsys cpuacct
[    0.061275] Initializing cgroup subsys devices
[    0.061309] Initializing cgroup subsys freezer
[    0.061337] Initializing cgroup subsys blkio
[    0.061427] CPU: Testing write buffer coherency: ok
[    0.061757] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.061897] Setting up static identity map for 0x39e678 - 0x39e6d4
[    0.063386] devtmpfs: initialized
[    0.074096] NET: Registered protocol family 16
[    0.080567] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.081670] bcm2708.uart_clock = 0
[    0.083060] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.083114] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.083150] mailbox: Broadcom VideoCore Mailbox driver
[    0.083244] bcm2708_vcio: mailbox at f200b880
[    0.083346] bcm_power: Broadcom power driver
[    0.083383] bcm_power_open() -> 0
[    0.083409] bcm_power_request(0, Cool
[    0.584095] bcm_mailbox_read -> 00000080, 0
[    0.584135] bcm_power_request -> 0
[    0.584161] Serial: AMBA PL011 UART driver
[    0.584304] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.908140] console [ttyAMA0] enabled
[    0.932105] bio: create slab <bio-0> at 0
[    0.936994] SCSI subsystem initialized
[    0.941091] usbcore: registered new interface driver usbfs
[    0.946674] usbcore: registered new interface driver hub
[    0.952262] usbcore: registered new device driver usb
[    0.958610] Switching to clocksource stc
[    0.962845] FS-Cache: Loaded
[    0.965975] CacheFiles: Loaded
[    0.980843] NET: Registered protocol family 2
[    0.986118] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.993859] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    1.000649] TCP: Hash tables configured (established 16384 bind 16384)
[    1.007254] TCP: reno registered
[    1.010509] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.016408] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.022986] NET: Registered protocol family 1
[    1.027849] RPC: Registered named UNIX socket transport module.
[    1.033889] RPC: Registered udp transport module.
[    1.038611] RPC: Registered tcp transport module.
[    1.043357] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.050469] bcm2708_dma: DMA manager at f2007000
[    1.055257] bcm2708_gpio: bcm2708_gpio_probe c0517d98
[    1.060721] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.069863] audit: initializing netlink socket (disabled)
[    1.075458] type=2000 audit(0.930:1): initialized
[    1.197712] VFS: Disk quotas dquot_6.5.2
[    1.201744] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.208806] FS-Cache: Netfs 'nfs' registered for caching
[    1.214550] NFS: Registering the id_resolver key type
[    1.219720] Key type id_resolver registered
[    1.224014] Key type id_legacy registered
[    1.228376] msgmni has been set to 876
[    1.233906] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.241619] io scheduler noop registered
[    1.245665] io scheduler deadline registered (default)
[    1.250848] io scheduler cfq registered
[    1.275760] Console: switching to colour frame buffer device 82x26
[    1.285855] kgdb: Registered I/O driver kgdboc.
[    1.292430] vc-cma: Videocore CMA driver
[    1.297843] vc-cma: vc_cma_base      = 0x00000000
[    1.303946] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.310650] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.326249] brd: module loaded
[    1.335566] loop: module loaded
[    1.340337] vchiq: vchiq_init_state: slot_zero = 0xdb000000, is_master = 0
[    1.349278] Loading iSCSI transport class v2.0-870.
[    1.356507] usbcore: registered new interface driver smsc95xx
[    1.363979] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.576204] Core Release: 2.80a
[    1.580620] Setting default values for core params
[    1.586751] Finished setting default values for core params
[    1.798714] Using Buffer DMA mode
[    1.803332] Periodic Transfer Interrupt Enhancement - disabled
[    1.810395] Multiprocessor Interrupt Enhancement - disabled
[    1.817228] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.822861] Dedicated Tx FIFOs mode
[    1.828573] dwc_otg: Microframe scheduler enabled
[    1.829001] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.835304] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.843925] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.850730] Init: Port Power? op_state=1
[    1.855995] Init: Power Port (0)
[    1.860568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.868758] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.877365] usb usb1: Product: DWC OTG Controller
[    1.883458] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
[    1.890548] usb usb1: SerialNumber: bcm2708_usb
[    1.897172] hub 1-0:1.0: USB hub found
[    1.902284] hub 1-0:1.0: 1 port detected
[    1.907854] dwc_otg: FIQ enabled
[    1.907870] dwc_otg: NAK holdoff enabled
[    1.907879] dwc_otg: FIQ split fix enabled
[    1.907898] Module dwc_common_port init
[    1.908111] Initializing USB Mass Storage driver...
[    1.914560] usbcore: registered new interface driver usb-storage
[    1.921869] USB Mass Storage support registered.
[    1.927929] usbcore: registered new interface driver libusual
[    1.935298] mousedev: PS/2 mouse device common for all mice
[    1.942843] bcm2835-cpufreq: min=700000 max=800000 cur=700000
[    1.949998] bcm2835-cpufreq: switching to governor powersave
[    1.956948] bcm2835-cpufreq: switching to governor powersave
[    1.963888] cpuidle: using governor ladder
[    1.969200] cpuidle: using governor menu
[    1.974378] sdhci: Secure Digital Host Controller Interface driver
[    1.981748] sdhci: Copyright(c) Pierre Ossman
[    1.987390] sdhci: Enable low-latency mode
[    2.032888] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.043318] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.052648] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.065441] usbcore: registered new interface driver usbhid
[    2.072331] usbhid: USB HID core driver
[    2.080166] TCP: cubic registered
[    2.086975] Initializing XFRM netlink socket
[    2.094697] NET: Registered protocol family 17
[    2.102872] Indeed it is in host mode hprt0 = 00021501
[    2.112821] Key type dns_resolver registered
[    2.122040] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.144034] registered taskstats version 1
[    2.173275] Waiting for root device /dev/mmcblk0p2...
[    2.182016] mmc0: read SD Status register (SSR) after 2 attempts
[    2.211263] mmc0: new high speed SDHC card at address e624
[    2.225510] mmcblk0: mmc0:e624 SU16G 14.8 GiB
[    2.233958]  mmcblk0: p1 p2
[    2.303443] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.314548] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.330589] devtmpfs: mounted
[    2.335541] Freeing init memory: 128K
[    2.342779] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.350914] Indeed it is in host mode hprt0 = 00001101
[    2.563360] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.571693] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.581770] hub 1-1:1.0: USB hub found
[    2.588104] hub 1-1:1.0: 3 ports detected
[    2.873104] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.983495] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.991986] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.008769] smsc95xx v1.0.4
[    3.077704] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ec:5b:8d
[    3.192932] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    3.303655] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0201
[    3.312223] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.338664] usb 1-1.2: Product: USB 2.0 Hub [MTT]
[    3.350924] hub 1-1.2:1.0: USB hub found
[    3.366209] hub 1-1.2:1.0: 7 ports detected
[    3.463071] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[    3.583564] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0606
[    3.592049] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.601324] usb 1-1.3: Product: USB Hub 2.0
[    3.607073] usb 1-1.3: Manufacturer: ALCOR
[    3.623100] hub 1-1.3:1.0: USB hub found
[    3.629818] hub 1-1.3:1.0: 4 ports detected
[    3.722987] usb 1-1.2.1: new high-speed USB device number 6 using dwc_otg
[    3.833608] usb 1-1.2.1: New USB device found, idVendor=1a40, idProduct=0101
[    3.842924] usb 1-1.2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.853269] usb 1-1.2.1: Product: USB 2.0 Hub
[    3.860495] hub 1-1.2.1:1.0: USB hub found
[    3.866901] hub 1-1.2.1:1.0: 4 ports detected
[    3.953014] usb 1-1.2.5: new high-speed USB device number 7 using dwc_otg
[    4.077893] usb 1-1.2.5: New USB device found, idVendor=0403, idProduct=6014
[    4.092804] usb 1-1.2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.115450] usb 1-1.2.5: Product: BitFORCE SHA256 SC
[    4.121919] usb 1-1.2.5: Manufacturer: FTDI
[    4.131878] usb 1-1.2.5: SerialNumber: FTWOX3DB
[    4.223052] usb 1-1.2.6: new high-speed USB device number 8 using dwc_otg
[    4.337599] usb 1-1.2.6: New USB device found, idVendor=0403, idProduct=6014
[    4.352725] usb 1-1.2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.372744] usb 1-1.2.6: Product: BitFORCE SHA256 SC
[    4.379227] usb 1-1.2.6: Manufacturer: FTDI
[    4.402716] usb 1-1.2.6: SerialNumber: FTWOTX4Q
[    4.492949] usb 1-1.2.7: new high-speed USB device number 9 using dwc_otg
[    4.617959] usb 1-1.2.7: New USB device found, idVendor=0403, idProduct=6014
[    4.642147] usb 1-1.2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.656886] usb 1-1.2.7: Product: BitFORCE SHA256 SC
[    4.670836] usb 1-1.2.7: Manufacturer: FTDI
[    4.676650] usb 1-1.2.7: SerialNumber: FTWPOD7D
[    4.773463] usb 1-1.3.1: new full-speed USB device number 10 using dwc_otg
[    4.894718] usb 1-1.3.1: not running at top speed; connect to a high speed hub
[    4.919491] usb 1-1.3.1: New USB device found, idVendor=0403, idProduct=6014
[    4.942814] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.962366] usb 1-1.3.1: Product: BitFORCE SHA256 SC
[    4.969587] usb 1-1.3.1: Manufacturer: FTDI
[    4.982833] usb 1-1.3.1: SerialNumber: FTWOTWVJ
[    5.083507] usb 1-1.3.2: new full-speed USB device number 11 using dwc_otg
[    5.204765] usb 1-1.3.2: not running at top speed; connect to a high speed hub
[    5.231538] usb 1-1.3.2: New USB device found, idVendor=0403, idProduct=6014
[    5.250398] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.272820] usb 1-1.3.2: Product: BitFORCE SHA256 SC
[    5.279287] usb 1-1.3.2: Manufacturer: FTDI
[    5.292828] usb 1-1.3.2: SerialNumber: FTWPJB22
[    5.393556] usb 1-1.3.3: new full-speed USB device number 12 using dwc_otg
[    5.523575] usb 1-1.3.3: New USB device found, idVendor=05e3, idProduct=0606
[    5.532098] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.560996] usb 1-1.3.3: Product: USB Hub 2.0
[    5.572809] usb 1-1.3.3: Manufacturer: ALCOR
[    5.584063] hub 1-1.3.3:1.0: USB hub found
[    5.600907] hub 1-1.3.3:1.0: 4 ports detected
[    5.693586] usb 1-1.3.4: new full-speed USB device number 13 using dwc_otg
[    5.823666] usb 1-1.3.4: New USB device found, idVendor=05e3, idProduct=0606
[    5.832235] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.843716] usb 1-1.3.4: Product: USB Hub 2.0
[    5.849810] usb 1-1.3.4: Manufacturer: ALCOR
[    5.859080] hub 1-1.3.4:1.0: USB hub found
[    5.865857] hub 1-1.3.4:1.0: 4 ports detected
[    5.923572] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.963629] usb 1-1.3.3.1: new full-speed USB device number 14 using dwc_otg
[    6.074860] usb 1-1.3.3.1: not running at top speed; connect to a high speed hub
[    6.094259] usb 1-1.3.3.1: New USB device found, idVendor=0403, idProduct=6014
[    6.103077] usb 1-1.3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.114352] usb 1-1.3.3.1: Product: BitFORCE SHA256 SC
[    6.121083] usb 1-1.3.3.1: Manufacturer: FTDI
[    6.127025] usb 1-1.3.3.1: SerialNumber: FTWPGBVL
[    6.213662] usb 1-1.3.3.2: new full-speed USB device number 15 using dwc_otg
[    6.313698] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.324921] usb 1-1.3.3.2: not running at top speed; connect to a high speed hub
[    6.348697] usb 1-1.3.3.2: New USB device found, idVendor=0403, idProduct=6014
[    6.365291] usb 1-1.3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.378453] usb 1-1.3.3.2: Product: BitFORCE SHA256 SC
[    6.385798] usb 1-1.3.3.2: Manufacturer: FTDI
[    6.391834] usb 1-1.3.3.2: SerialNumber: FTWPJA1X
[   15.319905] bcm2835-cpufreq: switching to governor ondemand
[   15.319933] bcm2835-cpufreq: switching to governor ondemand
[   17.610317] Adding 102396k swap on /var/swap.  Priority:-1 extents:1 across:102396k SS
[   17.830593] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17453.926998] usb 1-1.3.3.1: USB disconnect, device number 14
[17453.927669] usb 1-1.3.3.2: USB disconnect, device number 15
[17454.000865] usb 1-1.3.3: reset full-speed USB device number 12 using dwc_otg
[17454.410879] usb 1-1.3.3.1: new full-speed USB device number 16 using dwc_otg
[17454.512125] usb 1-1.3.3.1: not running at top speed; connect to a high speed hub
[17454.521143] usb 1-1.3.3.1: New USB device found, idVendor=0403, idProduct=6014
[17454.521174] usb 1-1.3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17454.521189] usb 1-1.3.3.1: Product: BitFORCE SHA256 SC
[17454.521202] usb 1-1.3.3.1: Manufacturer: FTDI
[17454.521213] usb 1-1.3.3.1: SerialNumber: FTWPGBVL
[17454.600907] usb 1-1.3.3.2: new full-speed USB device number 17 using dwc_otg
[17454.702232] usb 1-1.3.3.2: not running at top speed; connect to a high speed hub
[17454.711208] usb 1-1.3.3.2: New USB device found, idVendor=0403, idProduct=6014
[17454.711237] usb 1-1.3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17454.711250] usb 1-1.3.3.2: Product: BitFORCE SHA256 SC
[17454.711262] usb 1-1.3.3.2: Manufacturer: FTDI
[17454.711274] usb 1-1.3.3.2: SerialNumber: FTWPJA1X

     ▄▄████████▄▄             ▄▄████████▄▄             ▄▄████████▄▄      ██ ██ ██           ██ ██ 
   ▄████▀▀▀▀▀▀████▄         ▄████▀▀▀▀▀▀████▄         ▄████▀▀▀▀▀▀████▄      ██  █ ██        ██ ██   
  ███▀          ▀███       ███▀          ▀███▌      ███▀          ▀███▌    ██ ██ ██     ██ ██     
 ███                      ███              ███     ███              ███      ██ █  ██ ██ ██       
▐██▌                     ▐██▌                     ▐██▌              ▐██▌        █  ██ ██ ██       
███        ▄▄▄▄▄▄▄▄▄▄▄   ███                      ███                ███          ██  ██         
███        ███████████   ███                      ███                ███        ██ ██ ██ ██       
▐██▌              ███▌   ▐██▌               ██▌   ▐██▌              ▐██▌      ██ ██  ██ ██ ██     
 ███▄           ▄████     ███▄            ▄███     ███▄            ▄███      ██ ██     ██ ██ ██   
  ▀████▄▄▄▄▄▄▄▄████▀       ▀███▄▄      ▄▄███▀       ▀███▄▄      ▄▄███▀     ██ ██        ██ ██ ██   
    ▀▀██████████▀▀           ▀▀███████████▀           ▀▀███████████▀      ██ ██           ██ ██ ██

GLOBAL CRYPTO OFFERING EXCHANGE
██████
██████
███
███
███
███
███
███
███
███
███
███
RISE ABOVE!
WHERE POPULARITY IS IMMORTALIZED

███
███
███
███
███
███
███
███
███
███
███
███
.JOIN OUR ICO!.        ▄▄████████▄▄
     ▄████████████████▄
   ▄████████████████████▄
  ███████████████▀▀  █████
 ████████████▀▀      ██████
▐████████▀▀   ▄▄     █████▌
▐████▀▀    ▄█▀▀     ███████▌
▐████████ █▀        ███████▌
 ████████ ▄███▄   ███████
  ████████████████▄▄██████
   ▀████████████████████▀
     ▀████████████████▀
        ▀▀████████▀▀
TWITTER
FACEBOOK
YOUTUBE
Zanatos666
Sr. Member
****
Offline Offline

Activity: 280
Merit: 250


Sometimes man, just sometimes.....


View Profile
September 08, 2013, 03:35:22 PM
 #12348

I've restarted many times to get this working, So what your saying is to reinstall the VCP C210 drivers then WinUSB? This all started when one of my AMU's stopped spitting out accepts in BFGminer, I noticed it kept assigning that one AMU to COM3 no matter what and that I had like 50 com ports assigned., but I've only got 7 BE's plugged in at once..Ugh. Windows can be such a pain at times. Like I said, I'd just love to just wipe all the Com ports/drivers out clean and start anew.

When you use zadig, you have to change the driver for all of the devices, not just one, if you have them all plugged in.  The trick I believe around this is to unplug all of them instead of one, use zadig to change the driver, and then when you plug in the rest of the devices they will automatically attached to the winusb and thus cgminer will see them.

Squiggly letters, written really fast, with a couple of dots for good measure.
juhakall
Sr. Member
****
Offline Offline

Activity: 612
Merit: 250



View Profile
September 08, 2013, 05:36:22 PM
 #12349

Does anyone know a good way to cross compile libudev, so I could keep on cross compiling cgminer for ARM? I had no trouble compiling libncurses and libusb previously, but it looks like libudev has been integrated to the massive systemd project. Obviously I don't need to compile the whole systemd, but I just can't figure out how to compile libudev only.

Elitehash PPS Pools: Bitcore, Gentarium, Gincoin, Raven
ewibit
Legendary
*
Offline Offline

Activity: 2349
Merit: 1000


"Highest ROI crypto infrastructure"


View Profile
September 08, 2013, 06:14:41 PM
 #12350

hi
is there really no way to have Xinerama AND all GPU's active mining like here described?

http://whythiserror.blogspot.co.at/2013/06/adl-detected-more-less-devices-gpus.html
TIA


           ▄████████▄           ▄███████▄
          ████████████▄       ▄███████████
         ██████████████████████████████████
         ██████████████████████████████████
         ██████████████████████████████████                                              █████
          ████████████▀       ▀███████████                                               █████
            ▀██████▀            ▀██████▀                                                     
   ▄▄▄▄▄▄              ▄▄▄▄▄▄             █████████      ███████████    ████▒     █████  █████     ▄█████████▄     ███████████
 ██████████          ██████████          ███████████▒    ████████████    ████     ████   █████    █████████████    ████████████
█████████████       ████████████        ████     ████    ████    ▒████   █████   ████    █████   ▒████     ████▒   ████▒  ░░████
█████████████      ██████████████      ██████████████▒   ████     ████    ████   ████    █████   ████      ▒████   ████▒    ████
█████████████      ██████████████      █████▒▒▒▒▒▒▒▒▒    ████     ████     ████ ████     █████   ████▒     ▒████   ████▒    ████
█████████████       ████████████        ████▒            ████     ████      ███████      █████    ████     ████    ████▒    ████
 ▀█████████▀         ▀████████▀          ███████████     ████     ████      ▒█████       █████     ███████████     ████▒    ████
                                           ▀██████▒      ████     ████       ▒███        █████       ▀█████▀       ████▒    ████
           ▄████████▄          ▄████████▄
          ████████████▄      ▄████████████
         ██████████████████████████████████
         ██████████████████████████████████
          ████████████████████████████████
           ██████████▀        ▀██████████ 
            ▀██████▀            ▀██████▀ 
    WORLD'S MOST PROFITABLE STANDARD
  OF SELF-EXPANDING CRYPTO INFRASTRUCTURE
FACEBOOK 】【 TWITTER
        ANN THREAD
TELEGRAM MEDIUM
 
  Join our ICO: 
Dec. 1-31 │ Whitepaper 
OtaconEmmerich
Full Member
***
Offline Offline

Activity: 234
Merit: 100



View Profile
September 08, 2013, 07:13:57 PM
 #12351

When you use zadig, you have to change the driver for all of the devices, not just one, if you have them all plugged in.  The trick I believe around this is to unplug all of them instead of one, use zadig to change the driver, and then when you plug in the rest of the devices they will automatically attached to the winusb and thus cgminer will see them.
I assume you mean unplug them all BUT one, I'll try that if i ever switch back to my PC. Thanks for the help. Also thanks techman05 for the software tip, Not sure if I need it but sure looks handy to have around.
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2702
Merit: 1145


Ruu \o/


View Profile WWW
September 08, 2013, 09:44:01 PM
 #12352

Does anyone know a good way to cross compile libudev, so I could keep on cross compiling cgminer for ARM? I had no trouble compiling libncurses and libusb previously, but it looks like libudev has been integrated to the massive systemd project. Obviously I don't need to compile the whole systemd, but I just can't figure out how to compile libudev only.
You can't just install libudev development library?

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2702
Merit: 1145


Ruu \o/


View Profile WWW
September 08, 2013, 09:44:33 PM
 #12353

hi
is there really no way to have Xinerama AND all GPU's active mining like here described?

http://whythiserror.blogspot.co.at/2013/06/adl-detected-more-less-devices-gpus.html
TIA
Wrong support thread.

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
juhakall
Sr. Member
****
Offline Offline

Activity: 612
Merit: 250



View Profile
September 09, 2013, 02:24:30 AM
 #12354

Does anyone know a good way to cross compile libudev, so I could keep on cross compiling cgminer for ARM? I had no trouble compiling libncurses and libusb previously, but it looks like libudev has been integrated to the massive systemd project. Obviously I don't need to compile the whole systemd, but I just can't figure out how to compile libudev only.
You can't just install libudev development library?

I tried that first, but the configure script doesn't pick it up, presumably because I need to have a version compiled for arm. I'm no cross compilation expert, but that's what worked for me with libusb and libncurses. I downloaded those libraries, cross compiled them for arm and installed them to a specific directory. After pointing the configure script to search for libs and headers from that directory, the dependencies were detected.

If you have managed to cross compile cgminer without having to cross compile libudev too, I'm obviously doing something wrong here.

Elitehash PPS Pools: Bitcore, Gentarium, Gincoin, Raven
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2702
Merit: 1145


Ruu \o/


View Profile WWW
September 09, 2013, 02:27:31 AM
 #12355

Does anyone know a good way to cross compile libudev, so I could keep on cross compiling cgminer for ARM? I had no trouble compiling libncurses and libusb previously, but it looks like libudev has been integrated to the massive systemd project. Obviously I don't need to compile the whole systemd, but I just can't figure out how to compile libudev only.
You can't just install libudev development library?

I tried that first, but the configure script doesn't pick it up, presumably because I need to have a version compiled for arm. I'm no cross compilation expert, but that's what worked for me with libusb and libncurses. I downloaded those libraries, cross compiled them for arm and installed them to a specific directory. After pointing the configure script to search for libs and headers from that directory, the dependencies were detected.

If you have managed to cross compile cgminer without having to cross compile libudev too, I'm obviously doing something wrong here.
I only cross compile for windows, and windows does not use udev. The latest libusb requires udev on linux unfortunately.

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
Taugeran
Hero Member
*****
Offline Offline

Activity: 658
Merit: 500


CCNA: There i fixed the internet.


View Profile
September 09, 2013, 03:03:34 AM
 #12356



Human readable changelog:
3.4.1:

- Maximum avalon frequency is now 1000 instead of 450 since some overclockers have pushed beyond 450.


Horrreeee sheet!1
but will it get over 900.0?

Bitfury HW & Habañero : 1.625Th/s
tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1
Come join Coinbase
mdude77
Legendary
*
Offline Offline

Activity: 1540
Merit: 1001



View Profile
September 09, 2013, 10:35:38 AM
 #12357

3.4.2 crashed on win7x64 after about 36 hours.  Crashed in mswinsck.dll.  I neglected to get a screenshot.  In a hurry this morning. 

M

I mine at Kano's Pool because it pays the best and is completely transparent!  Come join me!
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2702
Merit: 1145


Ruu \o/


View Profile WWW
September 09, 2013, 10:52:20 AM
 #12358

What configure option do you have to enable for CGMiner to support mining with Block Erupters? I noticed there's no "--enable-asicminer" option...
They use the icarus driver.

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2702
Merit: 1145


Ruu \o/


View Profile WWW
September 09, 2013, 01:05:56 PM
 #12359

I've noticed that there are times when my block erupter's light flashes, but there's no activity in CGMiner. Shouldn't every flash be accompanied by either accepted shares, rejected shares, or hardware errors being incremented?
Not if you're mining at a diff greater than 1. The device returns diff1 shares.

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
-Redacted-
Hero Member
*****
Offline Offline

Activity: 574
Merit: 501


View Profile
September 09, 2013, 02:02:47 PM
 #12360

The screen does not necessarily display lines or update counts instantaneously.  You may see blink, blink, followed by two lines scrolling up the screen a second or two later.
Pages: « 1 ... 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 [618] 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 ... 846 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!