SRBMiner Cryptonight AMD GPU Miner V1.9.3

doktor83 (OP)

Hero Member

Offline

Activity: 2520
Merit: 626

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 04:11:28 AM

#1521

Quote from: CryptoPlay on May 02, 2018, 03:00:21 AM

Quote from: sayyiditow on May 02, 2018, 02:55:06 AM

Oh shoot, all this time I thought I was alone, I swear same issue. But it could be that I am having a 10gpu vega rig? I have turned off watchdog and ADL which looks like its helping but can't be certain yet, it has been just about 4 hours without issues.

So, you are the first human being on planet earth to report a working 10 Vega rig. Can you share your full settings and hardware please?

Doc, im about to test the new version 1.5.0 in my Vega 6 Saphire 64 rig. My only concern is that enable/disable is only half of the job since when the driver hangs, the card lost its OverdriveNTool profile AND softpowertables.
This could be problematic cuz most Vega cards are working underclocked adn undervolted. And disable/enable only recover the softpowertable(registry mod) part making the card work at the default frequency that is 130hz and 300mv above mining profile.
So, this card will tend to fail since will be regulated in SRB(Temp and RPM) to the previous mining configuration.

So...
The very same script, that is not a random script from the internet but the one made by Jericho Jones(JJ, please add credit), used to incorporate the function to your miner has the ability to apply OverdriveNTool profiles. It must be made by the config.txt file since the user must edit the lines accordingly with his needs.
This could be a bypass solution to Vegas only. It`s easy since all Vega users already know how to do this and instructions can be found in vegaminingguides. And its only one line to be added to the procedure, takes 2 seconds, with the only requirement that OT and OT.ini must be in same folder...

wish me luck
Cya and thanks

Next version will have a parameter that will run a .bat you specify after restarting the device, so you can put in something like start c:\OverdriveNTool\OverdriveNTool.exe -r1 -p1"GPU0" ... etc

SRBMiner-MULTI thread - HERE
http://www.srbminer.com

CryptoPlay

Jr. Member

Offline

Activity: 202
Merit: 2

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 06:03:43 AM

#1522

Doc,

Ive just tested the 1.5.0 with 6x Vega 64. Same good hash. I was still using 1.4.1 cuz it was working fine.

Ive tested the disable/enable feature.
After i press 2, took more than a min to disable the card. I have started to wait for the card come back and nothing. lol after 5 min ive decided to press 2 again and voila.
It may be good to add a message "card disable" 3 seconds after the event to be sure.

About JJ script, the script became more conservator and it added a separated disable and enable process with tempo to each card. ive always used the first version doing to all 6 at same time. It never hanged to me IF 5 seconds interval is respected. I mean, after disable all cards, if i hit a key to start the enable process in 3 seconds, the rig will BSOD. This is to all cards of course.

About the "restart_devices_on_startup" : option,
Can i place this anywhere in the config file?

https://signature.statseb.fr/sig-2065.png

sayyiditow

Newbie

Offline

Activity: 12
Merit: 0

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 06:25:00 AM

#1523

I am using AMD software version 18.3.4, you dont need to restart the vegas with this software version after each restart, it will auto detect. There is no special setting, I just had to reduce the OC on all cards, so running 900 on memory and 1300 on core. 950mV on core and 900mV on mem. 18kh/s, using SRBminer, tried cast too, same results. However, I have disabled the ADL reporting and I am using openhardwaremonitor to check temps and fan speed and I have also disabled the gpuwatchdog. That's it. Screens:

https://i.imgur.com/POSApjf.png

dragonmike

Hero Member

Offline

Activity: 1274
Merit: 556

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 07:22:33 AM

#1524

Quote from: livada on May 01, 2018, 05:40:23 PM

Quote from: dragonmike on May 01, 2018, 04:34:03 PM

1250W at the wall, 6x Vega56@64, Onda D1800

That is too much. my 3*vega56 flashed to 64 = 530-570W at the wall .
v7= 6000hr 555-560W

It's on the higher side I know, I have to feed my GPUs a bit more V than you see here in general for them (bad asic quality maybe), and there's also two Scythe Ultra Kaze fans on that rig that suck power...

Pennywis3

Full Member

Offline

Activity: 327
Merit: 100

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 07:39:31 AM

#1525

Quote from: sayyiditow on May 01, 2018, 07:47:08 PM

Can you add a manual miner restart for those who don't want to use the watchdog? For example, press 'r' to manually restart miner. Very important when one gpu crashes in a rig and we dont wanna use the watchdog bec it makes the rig hang.

Disabling ADL doesn't help, I've tried.
One way to solve this problem is to disable the watchdog with a shutdown script and add Taskkill /IM SRBMiner-CN.exe /F and OverdriveNTool.exe -r1 -r2 -r3 -r4 -r5 -r6 ( depend on how many cards you have ) to the script.

It has worked for me once, but don't know if it works every time.

DEATHMAN3452

Newbie

Offline

Activity: 24
Merit: 0

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 08:16:03 AM
Last edit: May 02, 2018, 09:45:02 AM by DEATHMAN3452

#1526

Hi !
Litle problem (((

C:\Users\RIG\Desktop\XMR>start.bat
[2018-05-02 13:15:55] No AMD gpu devices found on platform 0.

C:\Users\RIG\Desktop\XMR>SRBMiner-CN.exe --listdevices
[2018-05-02 13:14:26] Platform #0
[2018-05-02 13:14:26]
[2018-05-02 13:14:26] Intel(R) OpenCL
[2018-05-02 13:14:26] Intel(R) Corporation
[2018-05-02 13:14:26] OpenCL 2.1
[2018-05-02 13:14:26] DEVICES: 2
[2018-05-02 13:14:26]
[2018-05-02 13:14:26] DeviceID

doktor83 (OP)

Hero Member

Offline

Activity: 2520
Merit: 626

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 09:10:20 AM

#1527

Quote from: DEATHMAN3452 on May 02, 2018, 08:16:03 AM

Hi !
Litle problem (((

C:\Users\RIG\Desktop\XMR>start.bat
[2018-05-02 13:15:55] No AMD gpu devices found on platform 0.

C:\Users\RIG\Desktop\XMR>SRBMiner-CN.exe --listdevices
[2018-05-02 13:14:26] Platform #0
[2018-05-02 13:14:26]
[2018-05-02 13:14:26] Intel(R) OpenCL
[2018-05-02 13:14:26] Intel(R) Corporation
[2018-05-02 13:14:26] OpenCL 2.1
[2018-05-02 13:14:26] DEVICES: 2
[2018-05-02 13:14:26]
[2018-05-02 13:14:26] DeviceID

interesting how it found platform 0 as AMD platform, cause it checks by vendor name, and clearly on platform 0 vendor name is Intel(R) Corporation and not Advanced Micro Devices as it can be seen.
Detection actually works great so there is no option to enter platform, who knows what is going on there.
Which driver are you using?

SRBMiner-MULTI thread - HERE
http://www.srbminer.com

DEATHMAN3452

Newbie

Offline

Activity: 24
Merit: 0

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 09:41:29 AM

#1528

Quote from: doktor83 on May 02, 2018, 09:10:20 AM

Quote from: DEATHMAN3452 on May 02, 2018, 08:16:03 AM

Hi !
Litle problem (((

C:\Users\RIG\Desktop\XMR>start.bat
[2018-05-02 13:15:55] No AMD gpu devices found on platform 0.

C:\Users\RIG\Desktop\XMR>SRBMiner-CN.exe --listdevices
[2018-05-02 13:14:26] Platform #0
[2018-05-02 13:14:26]
[2018-05-02 13:14:26] Intel(R) OpenCL
[2018-05-02 13:14:26] Intel(R) Corporation
[2018-05-02 13:14:26] OpenCL 2.1
[2018-05-02 13:14:26] DEVICES: 2
[2018-05-02 13:14:26]
[2018-05-02 13:14:26] DeviceID

interesting how it found platform 0 as AMD platform, cause it checks by vendor name, and clearly on platform 0 vendor name is Intel(R) Corporation and not Advanced Micro Devices as it can be seen.
Detection actually works great so there is no option to enter platform, who knows what is going on there.
Which driver are you using?

Driver Amd Adrenalin 18.3.1
Intel integrated GPU Hd530 on Cpu
8xAmd Rx550
FIX IT
"platform_index" : 1, in config.txt change Platform !!
(in readmy.txt not comment this parameter )

Now new problem))
{ "id" : 0, "intensity" : 21, "worksize" : 8, "threads" : 2},
Intensity not change ! ( auto intensity =22
id ?

doktor83 (OP)

Hero Member

Offline

Activity: 2520
Merit: 626

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 10:05:44 AM

#1529

Quote from: DEATHMAN3452 on May 02, 2018, 09:41:29 AM

Driver Amd Adrenalin 18.3.1
Intel integrated GPU Hd530 on Cpu
8xAmd Rx550
FIX IT
"platform_index" : 1, in config.txt change Platform !!
(in readmy.txt not comment this parameter )

Now new problem))
{ "id" : 0, "intensity" : 21, "worksize" : 8, "threads" : 2},
Intensity not change ! ( auto intensity =22
id ?

There is no platform_index parameter in SRBMiner. So i don't know what are you doing and on which miner

SRBMiner-MULTI thread - HERE
http://www.srbminer.com

doktor83 (OP)

Hero Member

Offline

Activity: 2520
Merit: 626

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 10:10:15 AM

#1530

Quote from: Pennywis3 on May 02, 2018, 07:39:31 AM

Quote from: sayyiditow on May 01, 2018, 07:47:08 PM

Can you add a manual miner restart for those who don't want to use the watchdog? For example, press 'r' to manually restart miner. Very important when one gpu crashes in a rig and we dont wanna use the watchdog bec it makes the rig hang.

Disabling ADL doesn't help, I've tried.
One way to solve this problem is to disable the watchdog with a shutdown script and add Taskkill /IM SRBMiner-CN.exe /F and OverdriveNTool.exe -r1 -r2 -r3 -r4 -r5 -r6 ( depend on how many cards you have ) to the script.

It has worked for me once, but don't know if it works every time.

if the miner hangs, and the main thread becomes unresponsive then pressing R would do nothing

Also you can set in config the "reboot_script" parameter which if set, will disable watchdog standard resetting mode and will run your custom script instead.
You can put in that script for example what Pennywis3 wrote.

SRBMiner-MULTI thread - HERE
http://www.srbminer.com

DEATHMAN3452

Newbie

Offline

Activity: 24
Merit: 0

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 10:13:28 AM

#1531

Quote from: doktor83 on May 02, 2018, 10:05:44 AM

Quote from: DEATHMAN3452 on May 02, 2018, 09:41:29 AM

Driver Amd Adrenalin 18.3.1
Intel integrated GPU Hd530 on Cpu
8xAmd Rx550
FIX IT
"platform_index" : 1, in config.txt change Platform !!
(in readmy.txt not comment this parameter )

Now new problem))
{ "id" : 0, "intensity" : 21, "worksize" : 8, "threads" : 2},
Intensity not change ! ( auto intensity =22
id ?

There is no platform_index parameter in SRBMiner. So i don't know what are you doing and on which miner

"cryptonight_type" : "normalv7",
"platform_index" : 1,
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 75,
this config WORK

"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 75,
This not WORK !

Try it yourself

doktor83 (OP)

Hero Member

Offline

Activity: 2520
Merit: 626

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 10:13:36 AM

#1532

Quote from: CryptoPlay on May 02, 2018, 06:03:43 AM

Doc,

Ive just tested the 1.5.0 with 6x Vega 64. Same good hash. I was still using 1.4.1 cuz it was working fine.

Ive tested the disable/enable feature.
After i press 2, took more than a min to disable the card. I have started to wait for the card come back and nothing. lol after 5 min ive decided to press 2 again and voila.
It may be good to add a message "card disable" 3 seconds after the event to be sure.

About JJ script, the script became more conservator and it added a separated disable and enable process with tempo to each card. ive always used the first version doing to all 6 at same time. It never hanged to me IF 5 seconds interval is respected. I mean, after disable all cards, if i hit a key to start the enable process in 3 seconds, the rig will BSOD. This is to all cards of course.

About the "restart_devices_on_startup" : option,
Can i place this anywhere in the config file?

Added possibility to disable/enable GPU's while mining. To maximize efficiency, when a device is disabled it won't get disabled right at that moment, it will first finish the round it is working on, and then it will stop working.
This is good for you because if some shares are found, they will be sent to the pool, and only after that the device will get disabled. This can sometimes take even 15-30 sec.
For GPU id's from 0-9 just press the corresponding key, for 10, 11, 12 ..etc use SHIFT+NUMBER, so if you want to disable GPU13, press SHIFT+3 on the keyboard.

This is for pausing specifig GPU in the mining process, not for driver restarting with devcon

You misunderstood this option.

And yes, you put that option in the config.txt : "restart_devices_on_startup" : true.

This disables/enables every AMD gpu in the system. Altough i set a 2 sec timeout between those operations, but i will increase it to 5 sec if you say that much is needed.

SRBMiner-MULTI thread - HERE
http://www.srbminer.com

doktor83 (OP)

Hero Member

Offline

Activity: 2520
Merit: 626

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 10:16:34 AM

#1533

Quote from: DEATHMAN3452 on May 02, 2018, 10:13:28 AM

Quote from: doktor83 on May 02, 2018, 10:05:44 AM

Quote from: DEATHMAN3452 on May 02, 2018, 09:41:29 AM

Driver Amd Adrenalin 18.3.1
Intel integrated GPU Hd530 on Cpu
8xAmd Rx550
FIX IT
"platform_index" : 1, in config.txt change Platform !!
(in readmy.txt not comment this parameter )

Now new problem))
{ "id" : 0, "intensity" : 21, "worksize" : 8, "threads" : 2},
Intensity not change ! ( auto intensity =22
id ?

There is no platform_index parameter in SRBMiner. So i don't know what are you doing and on which miner

"cryptonight_type" : "normalv7",
"platform_index" : 1,
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 75,
this config WORK

"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 75,
This not WORK !

Try it yourself

I don't have to, im developing the damn thing Grin

Are you using the latest v1.5.0 ? Did you download it from the link on first page or some other site ?

Also make sure you uncomment the gpu_conf settings so :

Like this:

"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 2, "target_temperature" : 55}
]

Not this:

/*"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 2, "target_temperature" : 55}
]*/

SRBMiner-MULTI thread - HERE
http://www.srbminer.com

DEATHMAN3452

Newbie

Offline

Activity: 24
Merit: 0

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 01:00:20 PM

#1534

Quote from: doktor83 on May 02, 2018, 10:16:34 AM

Quote from: DEATHMAN3452 on May 02, 2018, 10:13:28 AM

Quote from: doktor83 on May 02, 2018, 10:05:44 AM

Quote from: DEATHMAN3452 on May 02, 2018, 09:41:29 AM

Driver Amd Adrenalin 18.3.1
Intel integrated GPU Hd530 on Cpu
8xAmd Rx550
FIX IT
"platform_index" : 1, in config.txt change Platform !!
(in readmy.txt not comment this parameter )

Now new problem))
{ "id" : 0, "intensity" : 21, "worksize" : 8, "threads" : 2},
Intensity not change ! ( auto intensity =22
id ?

There is no platform_index parameter in SRBMiner. So i don't know what are you doing and on which miner

"cryptonight_type" : "normalv7",
"platform_index" : 1,
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 75,
this config WORK

"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 75,
This not WORK !

Try it yourself

I don't have to, im developing the damn thing Grin

Are you using the latest v1.5.0 ? Did you download it from the link on first page or some other site ?

Also make sure you uncomment the gpu_conf settings so :

Like this:

"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 2, "target_temperature" : 55}
]

Not this:

/*"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 2, "target_temperature" : 55}
]*/

/*

Im sorry, my mistake!
Re install AMD driver and all OK ))

heavyarms1912

Full Member

Offline

Activity: 729
Merit: 114

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 01:22:01 PM

#1535

@dok
do you know of any reason the miner would just hang without any results being sent to pool. Basically the log says new job received and then the console keeps displaying full hashrate but none of the hashes but none are submitted. This has happened with v7 pools couple of times now for me. So from 04:19 and later the mining stopped but hashrates still get displayed out on console with no GPU hang until I shutdown the miner manually at 08:43. This was on support.xmr pool. Has happened with stellite pool too.

Code:

[2018-05-02 04:19:52] pool_have_job: Switching user to new job
[2018-05-02 04:19:52] pool_have_job: Pool sent a new job (ID: Xit8I/aR3mpvT5HBbrehA8O3I1uC)
[2018-05-02 08:42:47] stats: Mining time: 0 days, 10 hours, 19 minutes, 49 seconds
[2018-05-02 08:42:47] stats: Accepted/Total shares: 734/734
[2018-05-02 08:42:52] Stopping miner process
[2018-05-02 08:43:02] AMD Platform ID: 2

doktor83 (OP)

Hero Member

Offline

Activity: 2520
Merit: 626

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 01:26:22 PM

#1536

Quote from: heavyarms1912 on May 02, 2018, 01:22:01 PM

@dok
do you know of any reason the miner would just hang without any results being sent to pool. Basically the log says new job received and then the console keeps displaying full hashrate but none of the hashes but none are submitted. This has happened with v7 pools couple of times now for me. So from 04:19 and later the mining stopped but hashrates still get displayed out on console with no GPU hang until I shutdown the miner manually at 08:43. This was on support.xmr pool. Has happened with stellite pool too.

Code:

[2018-05-02 04:19:52] pool_have_job: Switching user to new job
[2018-05-02 04:19:52] pool_have_job: Pool sent a new job (ID: Xit8I/aR3mpvT5HBbrehA8O3I1uC)
[2018-05-02 08:42:47] stats: Mining time: 0 days, 10 hours, 19 minutes, 49 seconds
[2018-05-02 08:42:47] stats: Accepted/Total shares: 734/734
[2018-05-02 08:42:52] Stopping miner process
[2018-05-02 08:43:02] AMD Platform ID: 2

Which version ? I worked on this kind of issue in 1.4.9, is the version you are using before 1.4.9 ?

SRBMiner-MULTI thread - HERE
http://www.srbminer.com

Kriss.Kross

Member

Offline

Activity: 102
Merit: 40

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 02:32:00 PM

#1537

How to get 370-400 H/s for RX460 2G on cryptonight heavy ? With Srb 1.1.4 i can mine sumo on fairpool with hash 460 H/s per card (not work on another pool, shares rejected), but when use a newest SRB, only get 320 H/s per card

#Menunggu saat yang tepat untuk mining kembali

dannyprats

Member

Offline

Activity: 132
Merit: 10

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 04:11:41 PM

#1538

Quote from: Kicigz on May 01, 2018, 08:42:41 AM

I give some benchmark:
Only cryptonight heavy,blockchain driver, 1300core/2100mem, uber mix 3,1 (srb miner is much bether then cast or else):

rx470 4gb hynix 800 h/r,
rx470 4gb samsung 790 h/r,
rx580 4gb Powercolor samsung/hynix 817 h/r

only problem is primary card (attached dong on) with up to 4% low h/r (ON CAST AND CRYPTONIGHT HEAVY PRIMARI CARD IS 0 H/R)
https://imgur.com/a/GYwl8uy

WTF?

let me see if I understood, you have made UberMix-MOD for samsung memory to a card with Hynix memory?

How can this be possible?

heavyarms1912

Full Member

Offline

Activity: 729
Merit: 114

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 05:45:01 PM

#1539

Quote from: doktor83 on May 02, 2018, 01:26:22 PM

Quote from: heavyarms1912 on May 02, 2018, 01:22:01 PM

@dok
do you know of any reason the miner would just hang without any results being sent to pool. Basically the log says new job received and then the console keeps displaying full hashrate but none of the hashes but none are submitted. This has happened with v7 pools couple of times now for me. So from 04:19 and later the mining stopped but hashrates still get displayed out on console with no GPU hang until I shutdown the miner manually at 08:43. This was on support.xmr pool. Has happened with stellite pool too.

Code:

[2018-05-02 04:19:52] pool_have_job: Switching user to new job
[2018-05-02 04:19:52] pool_have_job: Pool sent a new job (ID: Xit8I/aR3mpvT5HBbrehA8O3I1uC)
[2018-05-02 08:42:47] stats: Mining time: 0 days, 10 hours, 19 minutes, 49 seconds
[2018-05-02 08:42:47] stats: Accepted/Total shares: 734/734
[2018-05-02 08:42:52] Stopping miner process
[2018-05-02 08:43:02] AMD Platform ID: 2

Which version ? I worked on this kind of issue in 1.4.9, is the version you are using before 1.4.9 ?

I think it's 1.4.5. I'll update the miner and monitor.

livada

Newbie

Offline

Activity: 417
Merit: 0

Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0

May 02, 2018, 07:12:36 PM

#1540

Quote from: dragonmike on May 02, 2018, 07:22:33 AM

Quote from: livada on May 01, 2018, 05:40:23 PM

Quote from: dragonmike on May 01, 2018, 04:34:03 PM

1250W at the wall, 6x Vega56@64, Onda D1800

That is too much. my 3*vega56 flashed to 64 = 530-570W at the wall .
v7= 6000hr 555-560W

It's on the higher side I know, I have to feed my GPUs a bit more V than you see here in general for them (bad asic quality maybe), and there's also two Scythe Ultra Kaze fans on that rig that suck power...

ok. My rig without minig spend 105W- 555W with mining-
3*vega spend 450w = 150w per card ...