SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Mrsmoker]

report from me : miner is so good i got 1056 h/s on rx 580 and 650 h/s for 570

[zgzoki]

report from me : miner is so good i got 1056 h/s on rx 580 and 650 h/s for 570

tell your settings for rx 580 ?
also do you have constant speed or variable from 900-1056 ?

[doktor83]

So i tried to set an auto start after restart but when the miner opens it shows random purple letters and shuts off.

also still would like to know why 1 rig when i try to run it, it compiles submits a share or two and then a message comes up in the miner stating " Something went wrong, i think you are up to something naughty and I have to stop you" and the miner shuts off

what is different on that rig than on the others where it is working?
That is an anti debug trigger you are seeing there.

[zgzoki]

I notice that every time after developer mining time, H/s drop for about 20% and it need long time to recover (1/2 hour). If I restart miner at that time he start to mine high H/s like before. 
Anyone else notice that ?

[Nokia555]

EthMonitoring v34 has now support for SRBMiner.

https://github.com/JamesSmith2/EthMonitoring/releases/tag/0.0.34

Instruction or video?

is it so difficult to make 2 clicks? https://github.com/JamesSmith2/EthMonitoring

i try but rig alwys offline

Hey,

Don't forget to add "api_enabled":true to your config.txt
How to guide for monitoring: https://www.youtube.com/watch?v=u0_laPal9Mw&feature=youtu.be

It will be added to next version of EthControl also, then it's available to deploy new versions with few clicks.

[henri2018]

Hi doktor,

Could you please check the screen shot please? Currently I am mining sumo on sumo.fairpool.xyz using version 1.5.0.
On my high hashrate rig, it is quite often to get million difficulty as shown in the screen shot below.
I tried with other miner as well like cast xmr 1.0.0, no issue with difficulty. Unfortunately, I didn't happy with it's hashrate.

And when the miner gets million difficulty, the miner will just display the hashrate, and few minutes later, it will run hashing again with difficulty 2000.

https://imgur.com/a/pwAsYxm

[doktor83]

Hi doktor,

Could you please check the screen shot please? Currently I am mining sumo on sumo.fairpool.xyz using version 1.5.0.
On my high hashrate rig, it is quite often to get million difficulty as shown in the screen shot below.
I tried with other miner as well like cast xmr 1.0.0, no issue with difficulty. Unfortunately, I didn't happy with it's hashrate.

And when the miner gets million difficulty, the miner will just display the hashrate, and few minutes later, it will run hashing again with difficulty 2000.

i hear you but the pool sets the diff, according to the speed you send shares. The more shares you send in shorter time so will the pool raise the difficulty. If the pool is set up good it should set a diff high so you should get approx 10 shares / min.
Others also complained on fairpool, but they said they have problems with every miner there, not only SRB.

[Mrsmoker]

report from me : miner is so good i got 1056 h/s on rx 580 and 650 h/s for 570

tell your settings for rx 580 ?
also do you have constant speed or variable from 900-1056 ?

yes. i got constant speed on rx 580 8gb. about 1050-1060.
but my rx 570 only got constant speed aroung 650.
i guess its the different beetwen rx 580 to rx 570 in Cryptonight-heavy.

My setting is only bios mod with timing like other people. no undervolt. no overclock. leave it that way, in my experience, the best stable hashrate.
maybe i just lucky its samsung chip

[henri2018]

Hi doktor,

Could you please check the screen shot please? Currently I am mining sumo on sumo.fairpool.xyz using version 1.5.0.
On my high hashrate rig, it is quite often to get million difficulty as shown in the screen shot below.
I tried with other miner as well like cast xmr 1.0.0, no issue with difficulty. Unfortunately, I didn't happy with it's hashrate.

And when the miner gets million difficulty, the miner will just display the hashrate, and few minutes later, it will run hashing again with difficulty 2000.

https://imgur.com/a/pwAsYxm

i hear you but the pool sets the diff, according to the speed you send shares. The more shares you send in shorter time so will the pool raise the difficulty. If the pool is set up good it should set a diff high so you should get approx 10 shares / min.
Others also complained on fairpool, but they said they have problems with every miner there, not only SRB.

Thanks dok. Finally, I created 2 instances on a single rig with each covering a half number of GPUs. Both running well now.

[Kamerun]

Please add the carry symbol to the log file. It's hard to understand anything in this.
http://pesticidy.ru/temp/SBR_Log.jpg

[doktor83]

Please add the carry symbol to the log file. It's hard to understand anything in this.

yes its hard if you don't turn on word wrap. Or even better, open it in an editor that understands new line char (notepad++)

[twotwosix]

Please add the carry symbol to the log file. It's hard to understand anything in this.
http://pesticidy.ru/temp/SBR_Log.jpg

When startup add a new log too

[cirlama]

...
also, anyone able to get 750h/s+ on RX 580 4GB models?
my 8GB models do 1000h/s+ SOMETIMES but cant get 4GB any higher.

I get 1040 h/s on my armor rx 580 hynix 8 gb I=55 and 720 h/s only on my nitro+ rx 480 elpida 4 gb I=29.5, I tried different timing straps on the 480, but it didn't change much

One strange thing is that the reported hashrate change each time I restart the miner
(most of the time, it's one time good, with 1040 h/s on the rx-580 and one time "bad" with 930 h/s on the same rx-580... and it makes comparison difficult)

[arvonceda]

i still have a problem with heavy... my sapphire rx580 4gb always down to 0 h/s until a hours running it's random. and i must restart SRB again
if i run V7 or lite... it's ok.

[tfarion]

in heavy coins I get 1100hs but in the alloy only 450hs does anyone know how to increase it?

[lebuawu2]

in heavy coins I get 1100hs but in the alloy only 450hs does anyone know how to increase it?

which driver and can share your your setting (intensity and work size) ?

[vitalyoff]

I make probably ))) final version of monitoring dashboard for SRBMiner

Look like this:
1 Rig
http://prntscr.com/jetxkd
2 Rigs
http://prntscr.com/jetxy5
3 Rigs
http://prntscr.com/jety51

Code for HTML:
(Just change the name and address of your rig(s) in the code as indicated in the comments)

1 Rig

Code:

<!DOCTYPE html>
<html>
<!-- ----------------------------- -->
<!-- Refresh rate in seconds below -->
<meta http-equiv="Refresh" content="15" />
<!-- ----------------------------- -->
<body bgcolor="#cccccc";>
<font size="3" face="Tahoma">

<style type="text/css">
html, body{width: 100%; height: 100%; padding: 0; margin: 0}
div{position: absolute; padding: 1em; border: 1px solid #000}
#top{background: #999; top: 0; left: 0; right: 0%; bottom: 95%}
#left{background: #ccc; top: 5%; left: 0; right: 0%; bottom: 0%}
</style>

<div id="top">

<table width="100%">
  <tr>
    <td><b><font size='2'>SRB Miner 1.5.1+ Dashboard One RIG</font></b></td><td align=right><font size='2'>v0.6</font></td>
  </tr>
</table>

</div>

<div id="left">

<p id="RIG1"></p>

<script>
<!-- ----------------------- -->
<!-- Rig frienly name below  -->
		rig_one = "RX5560"
<!-- ----------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_one + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG1").innerHTML = x
};
<!-- ----------------------------- -->
<!-- --- You miner IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- ----------------------------- -->
xmlhttp.send();

</script>

</div>

<!--
Thank can be here )))
Cпacибo гoвopить cюдa )))
ETH: 0xB8A3593Cb8Ab958bDF8Ab031b1FE72E34bc22e30
BTC: 1HEVAuVc6cP24EWx9jjfhikemFYNJMHqVw
https://bitcointalk.org/index.php?action=profile;u=2091200
 -->

</body>
</html>

2 Rigs

Code:

<!DOCTYPE html>
<html>
<!-- ----------------------------- -->
<!-- Refresh rate in seconds below -->
<meta http-equiv="Refresh" content="15" />
<!-- ----------------------------- -->
<body bgcolor="#cccccc";>
<font size="3" face="Tahoma">

<style type="text/css">
html, body{width: 100%; height: 100%; padding: 0; margin: 0}
div{position: absolute; padding: 1em; border: 1px solid #000}
#top{background: #999; top: 0; left: 0; right: 0%; bottom: 95%}
#left{background: #ccc; top: 5%; left: 0; right: 50%; bottom: 0%}
#right{background: #bbb; top: 5%; left: 50%; right: 0; bottom: 0%}
</style>

<div id="top">

<table width="100%">
  <tr>
    <td><b><font size='2'>SRB Miner 1.5.1+ Dashboard Two RIGs</font></b></td><td align=right><font size='2'>v0.6</font></td>
  </tr>
</table>

</div>

<div id="left">

<p id="RIG1"></p>

<script>
<!-- --------------------------- -->
<!-- Rig ONE frienly name below  -->
		rig_one = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_one + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG1").innerHTML = x
};
<!-- --------------------------------- -->
<!-- --- You miner ONE IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- --------------------------------- -->
xmlhttp.send();


</script>

</div>

<div id="right">

<p id="RIG2"></p>

<script>
<!-- --------------------------- -->
<!-- Rig TWO frienly name below  -->
		rig_two = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_two + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG2").innerHTML = x
};
<!-- --------------------------------- -->
<!-- --- You miner TWO IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3334", false);
<!-- --------------------------------- -->
xmlhttp.send();

</script>

</div>

<!--
Thank can be here )))
Cпacибo гoвopить cюдa )))
ETH: 0xB8A3593Cb8Ab958bDF8Ab031b1FE72E34bc22e30
BTC: 1HEVAuVc6cP24EWx9jjfhikemFYNJMHqVw
https://bitcointalk.org/index.php?action=profile;u=2091200
 -->

</body>
</html>

3 Rigs

Code:

<!DOCTYPE html>
<html>
<!-- ----------------------------- -->
<!-- Refresh rate in seconds below -->
<meta http-equiv="Refresh" content="15" />
<!-- ----------------------------- -->
<body bgcolor="#cccccc";>
<font size="3" face="Tahoma">

<style type="text/css">
html, body{width: 100%; height: 100%; padding: 0; margin: 0}
div{position: absolute; padding: 1em; border: 1px solid #000}
#top{background: #999; top: 0; left: 0; right: 0%; bottom: 95%}
#left{background: #ccc; top: 5%; left: 0; right: 67%; bottom: 0%}
#center{background: #bbb; top: 5%; left: 33%; right: 33%; bottom: 0%}
#right{background: #ccc; top: 5%; left: 67%; right: 0; bottom: 0%}
</style>

<div id="top">

<table width="100%">
  <tr>
    <td><b><font size='2'>SRB Miner 1.5.1+ Dashboard Three RIGs</font></b></td><td align=right><font size='2'>v0.6</font></td>
  </tr>
</table>

</div>

<div id="left">

<p id="RIG1"></p>

<script>
<!-- --------------------------- -->
<!-- Rig ONE frienly name below  -->
		rig_one = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_one + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG1").innerHTML = x
};
<!-- ----------------------------- -->
<!-- --- You miner ONE IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- ----------------------------- -->
xmlhttp.send();


</script>

</div>

<div id="center">

<p id="RIG2"></p>

<script>
<!-- --------------------------- -->
<!-- Rig TWO frienly name below  -->
		rig_two = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_two + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG2").innerHTML = x
};
<!-- --------------------------------- -->
<!-- --- You miner TWO IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- --------------------------------- -->
xmlhttp.send();

</script>

</div>

<div id="right">

<p id="RIG3"></p>

<script>
<!-- --------------------------- -->
<!-- Rig THREE frienly name below  -->
		rig_three = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_three + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG3").innerHTML = x
};
<!-- ----------------------------------- -->
<!-- --- You miner THREE IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3334", false);
<!-- ----------------------------------- -->
xmlhttp.send();

</script>

</div>
<!--
Thank can be here )))
Cпacибo гoвopить cюдa )))
ETH: 0xB8A3593Cb8Ab958bDF8Ab031b1FE72E34bc22e30
BTC: 1HEVAuVc6cP24EWx9jjfhikemFYNJMHqVw
https://bitcointalk.org/index.php?action=profile;u=2091200
 -->

</body>
</html>

[tfarion]

in heavy coins I get 1100hs but in the alloy only 450hs does anyone know how to increase it?

which driver and can share your your setting (intensity and work size) ?

1411/2250 - sapphire nitro rx580 8gb

intensity in heavy 53

[rig1313]

I make probably ))) final version of monitoring dashboard for SRBMiner

Look like this:
1 Rig
http://prntscr.com/jetxkd
2 Rigs
http://prntscr.com/jetxy5
3 Rigs
http://prntscr.com/jety51

Code for HTML:
(Just change the name and address of your rig(s) in the code as indicated in the comments)

1 Rig

Code:

<!DOCTYPE html>
<html>
<!-- ----------------------------- -->
<!-- Refresh rate in seconds below -->
<meta http-equiv="Refresh" content="15" />
<!-- ----------------------------- -->
<body bgcolor="#cccccc";>
<font size="3" face="Tahoma">

<style type="text/css">
html, body{width: 100%; height: 100%; padding: 0; margin: 0}
div{position: absolute; padding: 1em; border: 1px solid #000}
#top{background: #999; top: 0; left: 0; right: 0%; bottom: 95%}
#left{background: #ccc; top: 5%; left: 0; right: 0%; bottom: 0%}
</style>

<div id="top">

<table width="100%">
  <tr>
    <td><b><font size='2'>SRB Miner 1.5.1+ Dashboard One RIG</font></b></td><td align=right><font size='2'>v0.6</font></td>
  </tr>
</table>

</div>

<div id="left">

<p id="RIG1"></p>

<script>
<!-- ----------------------- -->
<!-- Rig frienly name below  -->
		rig_one = "RX5560"
<!-- ----------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_one + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG1").innerHTML = x
};
<!-- ----------------------------- -->
<!-- --- You miner IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- ----------------------------- -->
xmlhttp.send();

</script>

</div>

<!--
Thank can be here )))
Cпacибo гoвopить cюдa )))
ETH: 0xB8A3593Cb8Ab958bDF8Ab031b1FE72E34bc22e30
BTC: 1HEVAuVc6cP24EWx9jjfhikemFYNJMHqVw
https://bitcointalk.org/index.php?action=profile;u=2091200
 -->

</body>
</html>

2 Rigs

Code:

<!DOCTYPE html>
<html>
<!-- ----------------------------- -->
<!-- Refresh rate in seconds below -->
<meta http-equiv="Refresh" content="15" />
<!-- ----------------------------- -->
<body bgcolor="#cccccc";>
<font size="3" face="Tahoma">

<style type="text/css">
html, body{width: 100%; height: 100%; padding: 0; margin: 0}
div{position: absolute; padding: 1em; border: 1px solid #000}
#top{background: #999; top: 0; left: 0; right: 0%; bottom: 95%}
#left{background: #ccc; top: 5%; left: 0; right: 50%; bottom: 0%}
#right{background: #bbb; top: 5%; left: 50%; right: 0; bottom: 0%}
</style>

<div id="top">

<table width="100%">
  <tr>
    <td><b><font size='2'>SRB Miner 1.5.1+ Dashboard Two RIGs</font></b></td><td align=right><font size='2'>v0.6</font></td>
  </tr>
</table>

</div>

<div id="left">

<p id="RIG1"></p>

<script>
<!-- --------------------------- -->
<!-- Rig ONE frienly name below  -->
		rig_one = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_one + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG1").innerHTML = x
};
<!-- --------------------------------- -->
<!-- --- You miner ONE IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- --------------------------------- -->
xmlhttp.send();


</script>

</div>

<div id="right">

<p id="RIG2"></p>

<script>
<!-- --------------------------- -->
<!-- Rig TWO frienly name below  -->
		rig_two = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_two + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG2").innerHTML = x
};
<!-- --------------------------------- -->
<!-- --- You miner TWO IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3334", false);
<!-- --------------------------------- -->
xmlhttp.send();

</script>

</div>

<!--
Thank can be here )))
Cпacибo гoвopить cюдa )))
ETH: 0xB8A3593Cb8Ab958bDF8Ab031b1FE72E34bc22e30
BTC: 1HEVAuVc6cP24EWx9jjfhikemFYNJMHqVw
https://bitcointalk.org/index.php?action=profile;u=2091200
 -->

</body>
</html>

3 Rigs

Code:

<!DOCTYPE html>
<html>
<!-- ----------------------------- -->
<!-- Refresh rate in seconds below -->
<meta http-equiv="Refresh" content="15" />
<!-- ----------------------------- -->
<body bgcolor="#cccccc";>
<font size="3" face="Tahoma">

<style type="text/css">
html, body{width: 100%; height: 100%; padding: 0; margin: 0}
div{position: absolute; padding: 1em; border: 1px solid #000}
#top{background: #999; top: 0; left: 0; right: 0%; bottom: 95%}
#left{background: #ccc; top: 5%; left: 0; right: 67%; bottom: 0%}
#center{background: #bbb; top: 5%; left: 33%; right: 33%; bottom: 0%}
#right{background: #ccc; top: 5%; left: 67%; right: 0; bottom: 0%}
</style>

<div id="top">

<table width="100%">
  <tr>
    <td><b><font size='2'>SRB Miner 1.5.1+ Dashboard Three RIGs</font></b></td><td align=right><font size='2'>v0.6</font></td>
  </tr>
</table>

</div>

<div id="left">

<p id="RIG1"></p>

<script>
<!-- --------------------------- -->
<!-- Rig ONE frienly name below  -->
		rig_one = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_one + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG1").innerHTML = x
};
<!-- ----------------------------- -->
<!-- --- You miner ONE IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- ----------------------------- -->
xmlhttp.send();


</script>

</div>

<div id="center">

<p id="RIG2"></p>

<script>
<!-- --------------------------- -->
<!-- Rig TWO frienly name below  -->
		rig_two = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_two + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG2").innerHTML = x
};
<!-- --------------------------------- -->
<!-- --- You miner TWO IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3333", false);
<!-- --------------------------------- -->
xmlhttp.send();

</script>

</div>

<div id="right">

<p id="RIG3"></p>

<script>
<!-- --------------------------- -->
<!-- Rig THREE frienly name below  -->
		rig_three = "RX5560"
<!-- --------------------------- -->
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
        var myObj = JSON.parse(this.responseText);
		x = "<font size='4'>Rig: <b>" + myObj.rig_name + "<font color='#009900'> ONLINE</font></font><br>" + "</b>Devices: " + myObj.total_devices + " (threads: " + myObj.total_threads + ")<br>" 
		+"Cryptonight: <b>" + myObj.cryptonight_type + "<br>" + "</b>Online: " + Math.round(myObj.mining_time/60) + " min." + "<br>" +
		"Hashrate: <b>" + myObj.hashrate_total_now + "</b> (5 min: " + myObj.hashrate_total_5min + ", 30 min: " + myObj.hashrate_total_30min + ", MAX: " + 
		myObj.hashrate_total_max + ")<br>" + "<br>" + "Connected Pool: <b>" + myObj.pool.pool + "<br>" + "</b>DIFF: " + myObj.pool.difficulty + "<br>" + 
		"Connected from: " + myObj.pool.time_connected + "<br>" + "Uptime: " + Math.round(myObj.pool.uptime/60) + " min." + "<br>" + "Latency: " + 
		myObj.pool.latency + " msec.<br>" + "<br>" + "Shares total: " + myObj.shares.total + "<br>" + "Accepted: " + myObj.shares.accepted + "<br>" + "Rejected: " + 
		myObj.shares.rejected + "<br>" + "Average share time: " + myObj.shares.avg_find_time + " sec." + "<br>" + "<br>";
		x += "<table border=1 cellpadding=3 style='border-collapse: collapse; border: 3px solid black;'>"
		x += "<tr><th bgcolor=#A0A0A0>Device</th><th bgcolor=#A0A0A0>ID</th><th bgcolor=#A0A0A0>GPU</th><th bgcolor=#A0A0A0>BUS ID</th><th bgcolor=#A0A0A0>Kernel ID</th bgcolor=#A0A0A0><th bgcolor=#A0A0A0>Hashrate</th><th bgcolor=#A0A0A0>Core clock</th><th bgcolor=#A0A0A0>Memory clock</th><th bgcolor=#A0A0A0>&degC</th><th bgcolor=#A0A0A0>RPM</th></tr>"
		var  i;
		for (i in myObj.devices) {
		x += "<tr><td align=center>" + myObj.devices[i].device + "</td><td align=center>" + myObj.devices[i].device_id + "</td><td align=center>" + myObj.devices[i].model + 
		"</td><td align=center>" + myObj.devices[i].bus_id + "</td><td align=center>" + myObj.devices[i].kernel_id + "</td><td align=center>" + myObj.devices[i].hashrate + 
		"</td><td align=center>" + myObj.devices[i].core_clock + "</td><td align=center>" + myObj.devices[i].memory_clock + "</td><td align=center>" + 
		myObj.devices[i].temperature + "</td><td align=center>" + myObj.devices[i].fan_speed_rpm + "</td></tr>";
		}    
		x += "</table>"
		}
		else
		{
		x = "<font size='4'>Rig: <b>" + rig_three + "<font color='#FF0000'> OFFLINE</font></font>"
		}
		document.getElementById("RIG3").innerHTML = x
};
<!-- ----------------------------------- -->
<!-- --- You miner THREE IP and port --- -->
xmlhttp.open("GET", "http://192.168.1.160:3334", false);
<!-- ----------------------------------- -->
xmlhttp.send();

</script>

</div>
<!--
Thank can be here )))
Cпacибo гoвopить cюдa )))
ETH: 0xB8A3593Cb8Ab958bDF8Ab031b1FE72E34bc22e30
BTC: 1HEVAuVc6cP24EWx9jjfhikemFYNJMHqVw
https://bitcointalk.org/index.php?action=profile;u=2091200
 -->

</body>
</html>

TNX Alot !!!!!!!!!

[SauteedEntrails]

So i tried to set an auto start after restart but when the miner opens it shows random purple letters and shuts off.

also still would like to know why 1 rig when i try to run it, it compiles submits a share or two and then a message comes up in the miner stating " Something went wrong, i think you are up to something naughty and I have to stop you" and the miner shuts off

what is different on that rig than on the others where it is working?
That is an anti debug trigger you are seeing there.

Only difference is 5 gpus and the others have 4. The bios are all the same, card type, memory, vlt cc and mc the same.

How can i autostart without the anti dubug trigger initiating?



"Great Work on The Program"