SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[rambetiko]

i have 2 vega64 and 2 rx580 nitro+ se. how to setup for artocash? intensty etc.
vega64 - 1550 h
rx580 - 840 h

[avark]

Why has the speed of hashing dropped dramatically in recent versions?

Why lower the default intensity for some cards?

return it as it was)

[doktor83]

Why has the speed of hashing dropped dramatically in recent versions?

Why lower the default intensity for some cards?

return it as it was)

Default intensity (when left on 0) really was lowered for some cards, because some users reported that the auto intensity is setting them too high values , so their gpu's crashed.
All you have to do now is to set intensity by hand, which i think it's not too hard to do.

[Q_R_V]

Is it possible to start SRBMiner while not using config.txt and pools.txt like for example sgminer? Something like: "SRBMiner -pool <pool> -user <wallet> -i <intensity> -threads <number of threads> and so on. Can this be done?

[ZaGunShow]

Why has the speed of hashing dropped dramatically in recent versions?

Why lower the default intensity for some cards?

return it as it was)

If you are using the default intensity... You are doing this all wrong. Learn how to optimize your rig..

[rusman2]

Anyone ever got this error?

[2018-05-13 00:26:37] What? A debugger or a hex editor? No way.

After this, SRBMiner just restarts.

Been pretty much fine though, 2 days running 10 vegas on CN heavy, 1450h/s 875 mem and 1430 core clock.

Know what it means?

I got this when I was running a debugger to look at a Windows crash dump while mining. check your windows processes if you see this again and see if there's something out of the ordinary.

[b0n4r]

@doktor83,

Why does my 8 GB GPU seems a little bit slow than a 4GB using artocash algo ?

here's the screenshoot.

https://imgur.com/a/LVdE84X

All GPU are RX580  with setting auto_intensify: 0 and double thread: true

4 GB can reach 950-960 H/s meanwhile 8GB only 810-820 H/s

8 GB is micron and 4 GB is samsung all with 1200/875 and 2025/875 overclock setting.

[goodminer]

Is it possible to start SRBMiner while not using config.txt and pools.txt like for example sgminer? Something like: "SRBMiner -pool <pool> -user <wallet> -i <intensity> -threads <number of threads> and so on. Can this be done?

Great question, I asked it much earlier and developer said that this will be done in some of next versions, but it looks like that this option of one simple bat file isn't implemented yet, or...? It would be much easier to optimize this madness of cryptonote sub algos... 

[texasman86]

Is it possible to start SRBMiner while not using config.txt and pools.txt like for example sgminer? Something like: "SRBMiner -pool <pool> -user <wallet> -i <intensity> -threads <number of threads> and so on. Can this be done?

like you can do in claymore? is that what you're talking about?

[avark]

Why has the speed of hashing dropped dramatically in recent versions?

Why lower the default intensity for some cards?

return it as it was)

Default intensity (when left on 0) really was lowered for some cards, because some users reported that the auto intensity is setting them too high values , so their gpu's crashed.
All you have to do now is to set intensity by hand, which i think it's not too hard to do.

Thank you, yes, all is well, manually set the intensity and everything is on top, thanks!

[dingdongtobias]

has anyone tried this:

all cards are running, the hashrate for each card are different, but the fan speed and temp of the cards are the same

likely all cards are reporting the fan speed and temp of the card 0.

Not really. Temp is 59-60  i set target temperature to 59.

https://ibb.co/eK19ad

[Q_R_V]

Is it possible to start SRBMiner while not using config.txt and pools.txt like for example sgminer? Something like: "SRBMiner -pool <pool> -user <wallet> -i <intensity> -threads <number of threads> and so on. Can this be done?

like you can do in claymore? is that what you're talking about?

Exactly! This will make switching pools much easier.

[rocotto]

To DeV,

SRBMiner will support nvidia GPU card in future?

[dingdongtobias]

has anyone tried this:

all cards are running, the hashrate for each card are different, but the fan speed and temp of the cards are the same

likely all cards are reporting the fan speed and temp of the card 0.

https://ibb.co/fo9O1J

BUS = 0 for every card, use newer drivers because your BUSID-s are no detected, then it will be good.

[livada]

Is it possible to start SRBMiner while not using config.txt and pools.txt like for example sgminer? Something like: "SRBMiner -pool <pool> -user <wallet> -i <intensity> -threads <number of threads> and so on. Can this be done?

like you can do in claymore? is that what you're talking about?

Exactly! This will make switching pools much easier.

This is not claymor this is SRBMINER and i i dont wont this option. i wont option with pool and config. Go use claymor if you wona all like claymore.
Now i have 5-6 bat file . in claymor i must have 50. bat file.

Easier? how?


now pres P and this is it. you go on nex pool on list.

if you wonna use diferent algo you must start other start.bat

i have more start.bat: heavy.bat - v7.bat - lite.bat  etc..

heavy.bat call heavy-pool.txt and  config-heavy.txt . in pools-heavy.txt i have all heavy pool(heavy-sumo its)
%EXE% -c config-heavy.txt --pools pools-heavy.txt

v7.bat call config-v7.txt and pools-v7. in pools-v7. i have all v7 pool (xmr-msr-stl etc)
%EXE% -c config-v7.txt --pools pools-v7.txt

pools" :
[
{"pool_use_tls" : false, "pool" : "masari.superpools.net:7777", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "stellite.ingest.cryptoknight.cc:16222", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool.graft.spacepools.org:5555", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool.supportxmr.com:7777", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "dallas.itnspool.net:7777", "wallet" : "address", "password" : "x", "location" : "europe"},
]
}

and now i pres P and go on next pool. This is EASY

Problem with p is: in v7 i have in pool list 10-15 pools.
Doctor pls give me option CTRL+5 CTRL+8 for direct call 5 pool on list. pls. or press P for choise list pool on pool.txt

And dont change any with pool list and config.txt. Now is  excelent.

[Airen]

Any optimisation fore VEGA cards in heavy algo?

[livada]

Any optimisation fore VEGA cards in heavy algo?

read last 5-6-9 page- all in there.

intensyti = 56

vega 56 vith 64 bios  = 1500HR on heavy

[john1010]

My Windows Defender Removed it and and declared it as "severe" I have no options.. Is there any download link to the download a clean file?

[hesido]

I think I found a bug, I place all same algo coins in my pool txt (pool-allheavy.txt etc. etc.) and I may switch pools based on network difficulty, when SRB detects a gpu crash, it starts from the first coin in list, even though I manually switched to some coin. I think it should remember the last selected pool.

...
and now i pres P and go on next pool. This is EASY

Problem with p is: in v7 i have in pool list 10-15 pools.
Doctor pls give me option CTRL+5 CTRL+8 for direct call 5 pool on list. pls. or press P for choise list pool on pool.txt

And dont change any with pool list and config.txt. Now is  excelent.

I too agree defining which config to use and pool list to use provide better abstraction. That said, dynamic reload of specified pool.txt would be nice.

Instead of ctrl+number to switch, you could also have a delayed switch, so you don't disconnect and connect several times. I made this advice a few pages ago, I hope Doktor takes either one of us into account!

[nordmann666]

Any optimisation fore VEGA cards in heavy algo?

read last 5-6-9 page- all in there.

intensyti = 56

vega 56 vith 64 bios  = 1500HR on heavy

only get around 1200 with 56 intensity worksize 8 (also with 16)  and 2 threads

Edit: vega56 with 64 BIOS