SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[livada]

how i use this for all card without gpu conf?

"gpu_conf" :
[
{ "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 120, "worksize" : 16, "threads" : 2},

]
}

this is not work

"intensity" : 120,
"worksize" : 16,
"double_threads" : true,

W alwys 8 not 16

@DOCTOR ?

What a hyprocrite noob you are!

You know ?

Answer if you know? i dont know.

You know my di... fck noob

[livada]

No one is writing much about SRB miner, I asked something related to the topic with such bold claims.
No one ask for your noob input of installing driver and windows...
We discuss hashrates of the miner.. its the authors interest to aid best hash rate to use his miner..

- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?

Yo u ask this noob. This is not discussion on HR or minner. this is SPAM

You have other topic etc OVERCLOCK FOR NEWBIES  or WHAT MB I BAY etc...

[livada]

how i use this for all card without gpu conf?

"gpu_conf" :
[
{ "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 120, "worksize" : 16, "threads" : 2},

]
}

this is not work

"intensity" : 120,
"worksize" : 16,
"double_threads" : true,

W alwys 8 not 16

@DOCTOR ?

What a hyprocrite noob you are!

You know ?

Answer if you know? i dont know.

You know my di... fck noob

You ask for some much help in forums then complain when others try talk about HashRate.
Gypsy noob

You not answer noob. Answer how use WORKSIZE for all card without gpu conf?
Doctor not answer . you SMART GAY . answer .

ANSWER IS : NO OPTION FOR THIS NOW

Mybe in other version be option worksize for all GPU.

[MaxMidnite]

how i use this for all card without gpu conf?

"gpu_conf" :
[
{ "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 120, "worksize" : 16, "threads" : 2},

]
}

this is not work

"intensity" : 120,
"worksize" : 16,
"double_threads" : true,

W alwys 8 not 16

@DOCTOR ?

What a hyprocrite noob you are!

You know ?

Answer if you know? i dont know.

You know my di... fck noob

You ask for some much help in forums then complain when others try talk about HashRate.
Gypsy noob

You not answer noob. Answer how use WORKSIZE for all card without gpu conf?
Doctor not answer . you SMART GAY . answer .

I do not wish to comment further as I dont want to help you, maybe reason that he did not reply to you as you spammed board already many times before.
You wish people to answer your questions then accuse others of spamming. Its ok I not reply any more to gypsy noob. I will wait for the poster my question
was for to answer myself maybe in private but better to help others on forum also to get good hash rate.

[livada]

I do not wish to comment further as I dont want to help you, maybe reason that he did not reply to you as you spammed board already many times before.
You wish people to answer your questions then accuse others of spamming. Its ok I not reply any more to gypsy noob. I will wait for the poster my question
was for to answer myself maybe in private but better to help others on forum also to get good hash rate.

You big nob and you only SPAM. You dont help any with  answer : WHAT MB YOU HAVE. HOW I INSTAL WINDOWS. WHERE IS MY PRINTER?
This topic i SRBMINER TOPIC. and ask how use SRBMINER not how use windows.

I contact  doctor and i have answer. You dont have any. You big noob but You're right smart. but you not smart  you gipsy spamer noob.

NO OPTION WORKSIZE for all GPU without gpu_conf. Worsize is always 8.  
Mybe in new version add W for all gpu
This is answer  gipsy noob...

[ripcurrent]

Question for you guys.

I have a new card a Vega 56 Powercolor red devil. Samsung memory.

When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.

I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.

Any thoughts.

In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?

[livada]

Question for you guys.

I have a new card a Vega 56 Powercolor red devil. Samsung memory.

When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.

I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.

Any thoughts.

In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?

first try without powertable.

second you sure u use good .reg file and change this:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]

mybe your card not 0000 mybe is 0001 0002 *

vega 56/64bios - v7 intensity/worksize : 112/16 or 120/8
heavy : 56/8
lite 235/8

for other  algo etc arto-aloy see my  old post

[heavyarms1912]

You need good timing straps to reach 1k+ on CN-V7.  8gb cards can do 1k+ on CN-Heavy easily.  
I have also got 1260 H/s on an RX 570 8gb card (1466/2300 clocks).  They do 1140 H/s @ 1250/2240 clocks and 900mV core (105w from wall).  So it's pretty much possible.

Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.

I want to see that...
Can't get more that 700h/s with Elpida 570 pulse 4gb (with stak and SRB)

RX570 8gb 1260 H/s on CN-Heavy (i posted this some pages back)

6 x RX580 4gb cards  + 1 RX570 8gb (GPU4).

Ok this is very nice but a few questions:

- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
- To confirm your GPU 1250mhz/900mv Power Memory: 2020mhz /900mv?

Im not jealous of your results but similar cards and spent days tweaking it and cannot break 1000
My memory is Micron and Hynix.

Motherboard doesn't matter - cause I use two separate asus z170p and z170a boards and results doesn't change.
I don't overclock in BIOS.  I use ODN tool.  All states except P7 and P2 are disabled.
Each GPU is different some need 912 mV at 1250 while some are okay with 875-887 mV on core.  I usually keep P2-mem 887 or lower.

Notes:  
Whenever I set 912mV on core and 887 on mem the actual core voltage hovers in between 887-912.  more likely at 900mV.  
You need good timing staps else you would require very high OC to cross 1k.

And what parameters (intensity) you use?

SRB miner specific
Intensity 59 and dual threads.  8gb card at 116/118.

[hlleyll]

Hi Guys, what hash rate do you have on "heavy" with rx 570 8gb ? my max is 740 ;( on normal algo with claymore i have 880...

[doktor83]

Calm down, there is a "ignore" link under every nickname, just click that and you are good to go.

[Larvitar]

Hi Guys, what hash rate do you have on "heavy" with rx 570 8gb ? my max is 740 ;( on normal algo with claymore i have 880...

Check if your boards are in Compute Mode

What intensity do you are running?

[MaxMidnite]

You need good timing straps to reach 1k+ on CN-V7.  8gb cards can do 1k+ on CN-Heavy easily.  
I have also got 1260 H/s on an RX 570 8gb card (1466/2300 clocks).  They do 1140 H/s @ 1250/2240 clocks and 900mV core (105w from wall).  So it's pretty much possible.

Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.

I want to see that...
Can't get more that 700h/s with Elpida 570 pulse 4gb (with stak and SRB)

RX570 8gb 1260 H/s on CN-Heavy (i posted this some pages back)

6 x RX580 4gb cards  + 1 RX570 8gb (GPU4).
https://i.imgur.com/VQl9Hxz.jpg

Ok this is very nice but a few questions:

- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
- To confirm your GPU 1250mhz/900mv Power Memory: 2020mhz /900mv?

Im not jealous of your results but similar cards and spent days tweaking it and cannot break 1000
My memory is Micron and Hynix.

Motherboard doesn't matter - cause I use two separate asus z170p and z170a boards and results doesn't change.
I don't overclock in BIOS.  I use ODN tool.  All states except P7 and P2 are disabled.
Each GPU is different some need 912 mV at 1250 while some are okay with 875-887 mV on core.  I usually keep P2-mem 887 or lower.

Notes:  
Whenever I set 912mV on core and 887 on mem the actual core voltage hovers in between 887-912.  more likely at 900mV.  
You need good timing staps else you would require very high OC to cross 1k.

And what parameters (intensity) you use?

SRB miner specific
Intensity 59 and dual threads.  8gb card at 116/118.

Thanks man, will check this out, i used polaris auto timing straps, maybe this my issue

[ripcurrent]

Question for you guys.

I have a new card a Vega 56 Powercolor red devil. Samsung memory.

When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.

I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.

Any thoughts.

In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?

first try without powertable.

second you sure u use good .reg file and change this:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]

mybe your card not 0000 mybe is 0001 0002 *

vega 56/64bios - v7 intensity/worksize : 112/16 or 120/8
heavy : 56/8
lite 235/8

for other  algo etc arto-aloy see my  old post

Thanks for the help..yes it works fine no power play, I checked the number and it corresponds to the reg file. Do you have a link to a vega 56 powerplay that you know is good I will check this next. Is just strange after I reboot and it read it it in no longer good. Hashes fine under normal stock drives but use a lot of power.

[livada]

Question for you guys.

I have a new card a Vega 56 Powercolor red devil. Samsung memory.

When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.

I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.

Any thoughts.

In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?

first try without powertable.

second you sure u use good .reg file and change this:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]

mybe your card not 0000 mybe is 0001 0002 *

vega 56/64bios - v7 intensity/worksize : 112/16 or 120/8
heavy : 56/8
lite 235/8

for other  algo etc arto-aloy see my  old post

Thanks for the help..yes it works fine no power play, I checked the number and it corresponds to the reg file. Do you have a link to a vega 56 powerplay that you know is good I will check this next. Is just strange after I reboot and it read it it in no longer good. Hashes fine under normal stock drives but use a lot of power.

try this:
http://vega.miningguides.com/
http://vega.miningguides.com/p/faq.html#TDRFailure
https://www.reddit.com/r/MoneroMining/comments/74hjqn/monero_and_vega_the_definitive_guide/

[StarLordRammi]

what memory and what clocks?

Samsung 1250/2050.

thanks

not sure whats up but sometimes i get 1100h/s on Heavy on my samsung and sometimes 1000h/s

when samsung does 1100h/s my micron does less and sometimes other way around
cant get both to do 1100h/s at the same time

GPU0: RX 570 4GB Samsung Memory
GPU1: RX 580 8GB Samsung Memory
GPU2: RX 580 8GB Micron Memory

http://i67.tinypic.com/2ld8ydv.png

Hello, what's worksize and threads do you use? (on your RX 580 8GB mircron)

Code:

{ "id" : 1, "intensity" : 54, "worksize" : 8, "threads" : 2}, 

Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.

this is correct, my 4GB Hynix does 1k+h/s on CN-V7

[Iamtutut]

Mind to share your settings for Elpida ? I have two 4GB hynix/elpida mem GPUs, none can get above 750H/s with my current settings in Heavy. Thanks.

[Fast_cris]

What is this coin?  Cryptonight Fast

[altsay]

When running start.bat, command line window appears and closes after a few seconds.  No error shows and i also opened a new cmd.exe and run the SRBMiner-CN.exe directly, the command line just throws two empty new line and returns to folder.

[Bazzaar]

When running start.bat, command line window appears and closes after a few seconds.  No error shows and i also opened a new cmd.exe and run the SRBMiner-CN.exe directly, the command line just throws two empty new line and returns to folder.

Add pause too the bottom of the .bat

pause

like that

Baz

[altsay]

When running start.bat, command line window appears and closes after a few seconds.  No error shows and i also opened a new cmd.exe and run the SRBMiner-CN.exe directly, the command line just throws two empty new line and returns to folder.

Add pause too the bottom of the .bat

pause

like that

Baz

Code:

Press any key to continue . . .

c:\SRBMiner-CN-V1-6-0>

My card is R9 280x which i build today and the driver is Adrenaline 18.5.2