SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[MaxMidnite]

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Any plans for Nvidia Support?

[altsay]

Hi,

Please give a config.txt file for AMD RX280X!
Thanks

I was waiting for that, too

[Kriss.Kross]

Iam mining Loki (CN-Heavy) on 6x HIS RX460 2GB, with a single thread intensity max value is 28 and for double thread intensity max value is 14. But the single thread hashrate more higher than a dual thread hashrate ... it is normal ?

[Sgsg666]

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Okay my bad, I may have just copied some of the miner files and not the whole set. I will report back if I find any in this new download.  
edit: deleted my posts, miner is now working properly.

[twotwosix]

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Doktor why with versión 1.4.2 nofee i get 67-72 kh/s stellite before new algo, and after with new algo 1.6.0 only 58-70 (miner show 70.5) same pools? A lot of less, not only 0.85%.

Tried 1.4.2 with Graft and works fine.
Tried 1.6.0 with Graft and down a lot the hashrate with same settings.

The miner show a bit more hashrate on 1.6.0, but in the pools show a lot less.

1.4.2 imagreedybastard -24 hours average hashrate 67-69kh/s
1.6.0                                  -24 hours average hashrate 60-62kh/s

[dingdongtobias]

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Doktor why with versión 1.4.2 nofee i get 67-72 kh/s stellite and with 1.6.0 only 58-70 (miner show 70.5) same pools? A lot of less, not only 0.85%.

Tried 1.4.2 with Kraft and works fine.
Tried 1.6.0 with Kraft and down a lot the hashrate with same settings .

The miner show a bit more hashrate on 1.6.0, but in the pools show a lot less.

1.4.2 imagreedybastard -24 hours average hashrate 67-69kh/s
1.6.0                                  -24 hours average hashrate 60-62kh/s

You must be a magician if you can mine stellite with 1.4.2 version.

Also there is no Kraft coin. There is craft but that's not cryptonight algo.

[twotwosix]

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Doktor why with versión 1.4.2 nofee i get 67-72 kh/s stellite and with 1.6.0 only 58-70 (miner show 70.5) same pools? A lot of less, not only 0.85%.

Tried 1.4.2 with Kraft and works fine.
Tried 1.6.0 with Kraft and down a lot the hashrate with same settings .

The miner show a bit more hashrate on 1.6.0, but in the pools show a lot less.

1.4.2 imagreedybastard -24 hours average hashrate 67-69kh/s
1.6.0                                  -24 hours average hashrate 60-62kh/s

You must be a magician if you can mine stellite with 1.4.2 version.

Also there is no Kraft coin. There is craft but that's not cryptonight algo.

sorry is Graft. and i have saved the hasrate in old algo stellite with 1.4.2. with the new algo mi hashrate drop 6-8 kh/s in pool, in srbminer shows more

[coke15]

hi

strange thing this day:internet was cut for 3hours.

all the "old" version(1.5 and before) stayed aware:pool1-->pool2-->pool1.....

all the "new" version 1.5.9 and 1.6 closed    when internet gone

i missed a config??

[coke15]

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Doktor why with versión 1.4.2 nofee i get 67-72 kh/s stellite and with 1.6.0 only 58-70 (miner show 70.5) same pools? A lot of less, not only 0.85%.

Tried 1.4.2 with Kraft and works fine.
Tried 1.6.0 with Kraft and down a lot the hashrate with same settings .

The miner show a bit more hashrate on 1.6.0, but in the pools show a lot less.

1.4.2 imagreedybastard -24 hours average hashrate 67-69kh/s
1.6.0                                  -24 hours average hashrate 60-62kh/s

You must be a magician if you can mine stellite with 1.4.2 version.

Also there is no Kraft coin. There is craft but that's not cryptonight algo.

sorry is Graft. and i have saved the hasrate in old algo stellite with 1.4.2. with the new algo mi hashrate drop 6-8 kh/s in pool, in srbminer shows more

whaaaaaaat? is there a nofee version??

[Elder III]

Iam mining Loki (CN-Heavy) on 6x HIS RX460 2GB, with a single thread intensity max value is 28 and for double thread intensity max value is 14. But the single thread hashrate more higher than a dual thread hashrate ... it is normal ?

Double threads only seems to be worthwhile (on cryptonight heavy) if you have 8 GB GPUs. At least that is how it has been in our testing for 470/570 and 480/580 GPUs (4Gb vs 8GB models).

[Iamtutut]

Hello doktor83, can you please ad "niobio" ?
https://niobiocash.org/en/
Algo: Heavy.

Thanks !

[keksik]

Hi guys, please can someone advise what hash you get? this is mine settings and im not much satisfied.
these are my card:
GPU0: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 8]
GPU1: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 51.0][W: 8][T: 2][K: 1][BUS: 10]
GPU2: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 51.0][W: 8][T: 2][K: 1][BUS: 4]
GPU3: Radeon RX 570 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 13]
GPU4: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 12]
GPU5: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 14]
GPU6: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 15]
GPU7: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 11]
GPU8: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 1]

in setting i use intensity 0 as auto, double treads true and algo heavy:
is it possible that 4gb cards give half of hashrate than 8gb? shall i play with intensity maybe?

[2018-06-20 00:36:55] GPU0 :    636 H/s [T: 67c, RPM: 2112, CC: 1250 MHz, MC: 2050 MHz][BUS:8]
[2018-06-20 00:36:55] GPU1 :    1008 H/s [T: 66c, RPM: 2109, CC: 1250 MHz, MC: 2050 MHz][BUS:10]
[2018-06-20 00:36:55] GPU2 :    1058 H/s [T: 67c, RPM: 2372, CC: 1250 MHz, MC: 2000 MHz][BUS:4]
[2018-06-20 00:36:55] GPU3 :    622 H/s [T: 78c, RPM: 2202, CC: 1250 MHz, MC: 1950 MHz][BUS:13]
[2018-06-20 00:36:55] GPU4 :    628 H/s [T: 63c, RPM: 2086, CC: 1250 MHz, MC: 2000 MHz][BUS:12]
[2018-06-20 00:36:55] GPU5 :    628 H/s [T: 67c, RPM: 2160, CC: 1250 MHz, MC: 2000 MHz][BUS:14]
[2018-06-20 00:36:55] GPU6 :    628 H/s [T: 67c, RPM: 2147, CC: 1250 MHz, MC: 2000 MHz][BUS:15]
[2018-06-20 00:36:55] GPU7 :    654 H/s [T: 62c, RPM: 1464, CC: 1250 MHz, MC: 2150 MHz][BUS:11]
[2018-06-20 00:36:55] GPU8 :    638 H/s [T: 65c, RPM: 1491, CC: 1250 MHz, MC: 2050 MHz][BUS:1]

edit: i tried use intensity 50 for all cards and it has frozen...

[Elder III]

Hi guys, please can someone advise what hash you get? this is mine settings and im not much satisfied.
these are my card:
GPU0: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 8]
GPU1: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 51.0][W: 8][T: 2][K: 1][BUS: 10]
GPU2: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 51.0][W: 8][T: 2][K: 1][BUS: 4]
GPU3: Radeon RX 570 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 13]
GPU4: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 12]
GPU5: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 14]
GPU6: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 15]
GPU7: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 11]
GPU8: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 1]

in setting i use intensity 0 as auto, double treads true and algo heavy:
is it possible that 4gb cards give half of hashrate than 8gb? shall i play with intensity maybe?

[2018-06-20 00:36:55] GPU0 :    636 H/s [T: 67c, RPM: 2112, CC: 1250 MHz, MC: 2050 MHz][BUS:8]
[2018-06-20 00:36:55] GPU1 :    1008 H/s [T: 66c, RPM: 2109, CC: 1250 MHz, MC: 2050 MHz][BUS:10]
[2018-06-20 00:36:55] GPU2 :    1058 H/s [T: 67c, RPM: 2372, CC: 1250 MHz, MC: 2000 MHz][BUS:4]
[2018-06-20 00:36:55] GPU3 :    622 H/s [T: 78c, RPM: 2202, CC: 1250 MHz, MC: 1950 MHz][BUS:13]
[2018-06-20 00:36:55] GPU4 :    628 H/s [T: 63c, RPM: 2086, CC: 1250 MHz, MC: 2000 MHz][BUS:12]
[2018-06-20 00:36:55] GPU5 :    628 H/s [T: 67c, RPM: 2160, CC: 1250 MHz, MC: 2000 MHz][BUS:14]
[2018-06-20 00:36:55] GPU6 :    628 H/s [T: 67c, RPM: 2147, CC: 1250 MHz, MC: 2000 MHz][BUS:15]
[2018-06-20 00:36:55] GPU7 :    654 H/s [T: 62c, RPM: 1464, CC: 1250 MHz, MC: 2150 MHz][BUS:11]
[2018-06-20 00:36:55] GPU8 :    638 H/s [T: 65c, RPM: 1491, CC: 1250 MHz, MC: 2050 MHz][BUS:1]

edit: i tried use intensity 50 for all cards and it has frozen...

4GB GPUs don't do that well on Cryptonight Heavy. You can run dual threads quite well on the 8GB GPUs, but the 4GB ones seem to do either the same or worse then with single threads. Make sure you have compute mode enabled in your drivers if you haven't done that already.

[QuirkSilver]

Hi, it happened alot, where miner keeps mining (afaik up to 1.5.6 version) even if i'm disconnected! then next day i find (3000 share, 28% accepted, and rest is rejected!!) i have 4G Mifi and usb dongles wifi its abit not steady but works aside from ~10 disconnects per day.... but when it comes back and miner goes "lala land" its a massive loss.

[QuirkSilver]

Hi guys, please can someone advise what hash you get? this is mine settings and im not much satisfied.
these are my card:
GPU0: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 8]
GPU1: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 51.0][W: 8][T: 2][K: 1][BUS: 10]
GPU2: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 51.0][W: 8][T: 2][K: 1][BUS: 4]
GPU3: Radeon RX 570 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 13]
GPU4: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 12]
GPU5: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 14]
GPU6: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 15]
GPU7: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 11]
GPU8: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 1]

in setting i use intensity 0 as auto, double treads true and algo heavy:
is it possible that 4gb cards give half of hashrate than 8gb? shall i play with intensity maybe?

[2018-06-20 00:36:55] GPU0 :    636 H/s [T: 67c, RPM: 2112, CC: 1250 MHz, MC: 2050 MHz][BUS:8]
[2018-06-20 00:36:55] GPU1 :    1008 H/s [T: 66c, RPM: 2109, CC: 1250 MHz, MC: 2050 MHz][BUS:10]
[2018-06-20 00:36:55] GPU2 :    1058 H/s [T: 67c, RPM: 2372, CC: 1250 MHz, MC: 2000 MHz][BUS:4]
[2018-06-20 00:36:55] GPU3 :    622 H/s [T: 78c, RPM: 2202, CC: 1250 MHz, MC: 1950 MHz][BUS:13]
[2018-06-20 00:36:55] GPU4 :    628 H/s [T: 63c, RPM: 2086, CC: 1250 MHz, MC: 2000 MHz][BUS:12]
[2018-06-20 00:36:55] GPU5 :    628 H/s [T: 67c, RPM: 2160, CC: 1250 MHz, MC: 2000 MHz][BUS:14]
[2018-06-20 00:36:55] GPU6 :    628 H/s [T: 67c, RPM: 2147, CC: 1250 MHz, MC: 2000 MHz][BUS:15]
[2018-06-20 00:36:55] GPU7 :    654 H/s [T: 62c, RPM: 1464, CC: 1250 MHz, MC: 2150 MHz][BUS:11]
[2018-06-20 00:36:55] GPU8 :    638 H/s [T: 65c, RPM: 1491, CC: 1250 MHz, MC: 2050 MHz][BUS:1]

edit: i tried use intensity 50 for all cards and it has frozen...

Mine Cryponight V7 only with these, don't use automatic..... use 2 threads (16 worksize as well not 8, usually gives more hash rate)and 54++  intensity depending on memory, these 580s can EASILY do 950-1050 h/s with low power consumption.

[rockyO]

for 470/570 4gb cards I can go max I=29 worksize 8 and threads 2 with core at 1310/950-1000mv and memory 2100/940-950mv.
I get 700-730 H/s depending on cards memory...for samsung it is above 725 every time for others it is 700 consistent. to get more h/s just OC the core or modify the bios.

[hesido]

Hello doktor83, can you please ad "niobio" ?
https://niobiocash.org/en/
Algo: Heavy.

Thanks !

I can already mine niobio with SRBMiner, just use heavy.

[keksik]

so sum it up:
i use single threat for 4GB and it is much better, aprox 740H/s, 8gb dual thread is giving 1000+H/s. if i use 16worksize it lowers hash, for all card doesnt matter if 8gb or 4gb. its progress, but still needs to be improved...i would like to mine loki...i have to improve somehow the rest of 580 4gb.need to increase intensity or shall i do something else? or jsut 4gb doesnt do better in heavy?


GPU0: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 8]
GPU1: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 52.0][W: 8][T: 2][K: 1][BUS: 10]
GPU2: Radeon RX 580 Series [Ellesmere] [8192 MB][Intensity 52.0][W: 8][T: 2][K: 1][BUS: 4]
GPU3: Radeon RX 570 Series [Ellesmere] [4096 MB][Intensity 53.0][W: 8][T: 1][K: 1][BUS: 13]
GPU4: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 12]
GPU5: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 14]
GPU6: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 15]
GPU7: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 11]
GPU8: Radeon RX 580 Series [Ellesmere] [4096 MB][Intensity 54.0][W: 8][T: 1][K: 1][BUS: 1]

[2018-06-20 10:57:12] GPU0 :    761 H/s [T: 59c, RPM: 2298, CC: 1250 MHz, MC: 2050 MHz][BUS:8]
[2018-06-20 10:57:12] GPU1 :    1006 H/s [T: 56c, RPM: 2183, CC: 1250 MHz, MC: 2050 MHz][BUS:10]
[2018-06-20 10:57:12] GPU2 :    1002 H/s [T: 60c, RPM: 1852, CC: 1250 MHz, MC: 2000 MHz][BUS:4]
[2018-06-20 10:57:12] GPU3 :    686 H/s [T: 67c, RPM: 2233, CC: 1250 MHz, MC: 1950 MHz][BUS:13]
[2018-06-20 10:57:12] GPU4 :    746 H/s [T: 56c, RPM: 1786, CC: 1250 MHz, MC: 2000 MHz][BUS:12]
[2018-06-20 10:57:12] GPU5 :    746 H/s [T: 60c, RPM: 2156, CC: 1250 MHz, MC: 2000 MHz][BUS:14]
[2018-06-20 10:57:12] GPU6 :    746 H/s [T: 61c, RPM: 2173, CC: 1250 MHz, MC: 2000 MHz][BUS:15]
[2018-06-20 10:57:12] GPU7 :    757 H/s [T: 60c, RPM: 1260, CC: 1250 MHz, MC: 2150 MHz][BUS:11]
[2018-06-20 10:57:12] GPU8 :    764 H/s [T: 58c, RPM: 1364, CC: 1250 MHz, MC: 2050 MHz][BUS:1]

EDIT: i think it will be better to mine ETC and exchange for loki:D i googled that almost all got only 700-780 for 4gb rx580....strange really...it should not be that memory depended as ethash algo.

[huntingthesnark]

Hi folks, been trawling thru the thread - getting 'share above target' rejects on nicehash. Have set to "normalv7" in config, and "nicehash" true, but has no effect... What am I not doing please?

[wacko]

What am I not doing please?

You didn't mention what you're mining. I think "Above target" means the wrong algo, there are 3 cryptonight algos on nicehash (regular, v7 and heavy), and you'd need to select the right one for the port you're aiming your miners at.