Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[frostminer]

Nice work. With v3.0 i have 100% eth hashrate + 33% dcr hashrate per card and near 0%/2% rejects respectively.
Are there any plans to add vcash (Blake algo) mining in dual mode?

Yes I'd like vcash support too

Yea, the blake algo is superlight!  
You can actually run it with claymores dualminer .. just sacrifice some.
Im sure this could be programmed to work in better synergy.


With the BLC mergepool .. you could then mine 8 coins at the same time.

ETH
DCR
BLC-Merged
PHO-Merged
BBTC-Merged
ELT-Merged
LIT-Merged
UMO-Merged

What do you mean by "you can actually run it with claymores dualminer ?"  

Meant "at the same time as"  

Like this screenshot. Im not pushing the rig because of a bad PSU waiting for replacement. But from 110mh eth usually to 108ish while running blake mergemining.

Running low 1-2 ethi and around 28 dcri and only intensity 3 on the blakeminer.

If you run the regular ethminer you can push the blake pretty high.

In this screen there's 8 coins beeing mined simultaneously

[1714815591]

1714815591

[1714815591]

1714815591

[1714815591]

1714815591

[1714815591]

1714815591

[Tavarua]

Are the R9 270's functional w/Claymore's DP miner? I've got a box of them and in the process of building a new rig.

A have a rig with 6 x 270x happily mining at 80~82 MHs 

I have some R9 270X as well...quite happy, if I had a box of them , I'd get mining before its too late.
Eth only, nothing fancy , no overclock and such.

1 - Asus R9 270X 2GB   12.880mH
2 - MSI R9 270X 4GB     14.17~14.2
1 MSI HD 7850 - 2 GB     11.08~11.12

pulling 53.2~53.4 MH nice cool running.

I got sum 270x to. First i test it with only eth. I get 14.8 mhs ( thats poor when i compare it with other miner, i get around 16) but when i switch to dual mining i get 15.5 for eth and 240 for dcr.

Is there a minimum for ram on AMD boards? Noticed Intel requires 16gb, I've got box of 1gb RAM sticks that I will use for the AMD rig...

Can anyone recommend a cpu for this Intel board? http://www.newegg.com/Product/Product.aspx?Item=N82E16813128860&ignorebbr=1 > Only used AMD up to this point, I'll go out tmrw and p/u. Would like to get one rig up & running tonight.

[Tavarua]

Are the R9 270's functional w/Claymore's DP miner? I've got a box of them and in the process of building a new rig.

A have a rig with 6 x 270x happily mining at 80~82 MHs  

I have some R9 270X as well...quite happy, if I had a box of them , I'd get mining before its too late.
Eth only, nothing fancy , no overclock and such.

1 - Asus R9 270X 2GB   12.880mH
2 - MSI R9 270X 4GB     14.17~14.2
1 MSI HD 7850 - 2 GB     11.08~11.12

pulling 53.2~53.4 MH nice cool running.

4 rigs
2- 5x Sapphire R9 390 NITRO - PSU 1700 W - OC 1170/1500 - Win10
2- 4x Sapphire R9 390 NITRO - PSU 1600 W - OC 1170/1500 - Win10

pulling 564.6 MH

Its already too late for you. You'll never get ROI. Diff grows and grows  
Hashrate with 5 Cards is slow. What is your power consumption?

Are they switching to POS tmrw? If the price goes up t $20 & I get 1 Eth per day (even if it doesn't), sounds like I'll come out on the + side. I'm already the possible 1500 minimum to participate in POS. so anything from here on out is icing. There seems to be an ideal that when the switch to POS that the world will come to a screeching halt. Not targeting anyone in particular but I think a person would be naive to not acknowledge the risks. Me, I'm in already in and hitting it until they carry me out on a stretcher. Thanks for your input.

[MacT]

 Is there a way to NOT send 'reported hashrate' to ethermine.org? That feature adds a focus grabbing green bar to the charts there that makes it difficult to get the popup numbers I actually want to see.

[Claymore]

 Is there a way to NOT send 'reported hashrate' to ethermine.org? That feature adds a focus grabbing green bar to the charts there that makes it difficult to get the popup numbers I actually want to see.

Use undocumented option "-erate 0". Available in all v4.x. It will be documented in next update.

[adamvp]

Today my ethminer crashes so I decided to try CDM on my own ring (my last posts was about friends rigs)  and it looks very promising.. 73mhs compare to 71-75mhs eth + 1000mhs on decred at default..

But stability is the clue, so see you tomorrow  
and more important with ethminer @dwarfpool I had about 0,8eth/day last time so I'll be able to compare soon real worth..

#EDIT:

I am using 4.2 beta

[fr4nkthetank]

Thanks for the explanation about blake mergemining !  But is it worth it ?  since eth intensity is lower and all.  I might set one card on this and see for myself I guess

[frostminer]

Thanks for the explanation about blake mergemining !  But is it worth it ?  since eth intensity is lower and all.  I might set one card on this and see for myself I guess

im not sure how much you can get pushing it.. havent had time to  play around with this.
But those 2mh lost dont pay much anyways.. maybe less than the 8 coins merged at 6-900 mh

[Trimegistus]

Thanks for the explanation about blake mergemining !  But is it worth it ?  since eth intensity is lower and all.  I might set one card on this and see for myself I guess

IMHO loosing ETH hashrate to mine those coins is a waste of mining resources because you'll be mostly mining completely worthless coins...

Even BLC is a waste of time.

Check it out:

http://coinmarketcap.com/currencies/blakecoin/#markets

Less than 1 BTC vol/24h? How are you going to sell your coins?

[frostminer]

Thanks for the explanation about blake mergemining !  But is it worth it ?  since eth intensity is lower and all.  I might set one card on this and see for myself I guess

IMHO loosing ETH hashrate to mine those coins is a waste of mining resources because you'll be mostly mining completely worthless coins...

Even BLC is a waste of time.

Check it out:

http://coinmarketcap.com/currencies/blakecoin/#markets

Less than 1 BTC vol/24h? How are you going to sell your coins?

The fraction of hashingpower going to mergemining is not enough to make 1 btc anyways. Its more the fun of getting so many coins, ignoring their low value.
For value, one should probably look at vcash instead.

[offon]

miner works great, but one suggestion will be great to build webserver where we can manage all rigs through web browser not teamviewer

[citronick]

Are the R9 270's functional w/Claymore's DP miner? I've got a box of them and in the process of building a new rig.

A have a rig with 6 x 270x happily mining at 80~82 MHs 

I have some R9 270X as well...quite happy, if I had a box of them , I'd get mining before its too late.
Eth only, nothing fancy , no overclock and such.

1 - Asus R9 270X 2GB   12.880mH
2 - MSI R9 270X 4GB     14.17~14.2
1 MSI HD 7850 - 2 GB     11.08~11.12

pulling 53.2~53.4 MH nice cool running.

I got sum 270x to. First i test it with only eth. I get 14.8 mhs ( thats poor when i compare it with other miner, i get around 16) but when i switch to dual mining i get 15.5 for eth and 240 for dcr.

Is there a minimum for ram on AMD boards? Noticed Intel requires 16gb, I've got box of 1gb RAM sticks that I will use for the AMD rig...

Can anyone recommend a cpu for this Intel board? http://www.newegg.com/Product/Product.aspx?Item=N82E16813128860&ignorebbr=1 > Only used AMD up to this point, I'll go out tmrw and p/u. Would like to get one rig up & running tonight.

No issues with my ASrock H81-BTC with a cheap Intel Celeron 1840 with onboard 8GB RAM, W8.1 and 16GB-20GB Virtual Memory, running 5 x 390s, with v4.2 - stable and rocking.
Also, no issues with my AMD FX 8 core with 16GB RAM, W8.1and 16GB-20Gb virtual memory, running a single 390 and GTX980 Ti
The guide of 16GB memory is for virtual memory under windows environment.

[fr4nkthetank]

Thanks for the explanation about blake mergemining !  But is it worth it ?  since eth intensity is lower and all.  I might set one card on this and see for myself I guess

IMHO loosing ETH hashrate to mine those coins is a waste of mining resources because you'll be mostly mining completely worthless coins...

Even BLC is a waste of time.

Check it out:

http://coinmarketcap.com/currencies/blakecoin/#markets

Less than 1 BTC vol/24h? How are you going to sell your coins?

Hey we dont all have crazy industrial rigs here.  I think its a great idea, and I for one like smaller coins.  accumulate some, then sell a bit or wait for a huge 5x-20x pump and sell them all then.  just saying

[qqqq]

What about json-rpc feauture for remote monitoring ?

[rdnkjdi]

What pool are you guys using for DCR?  It seems like supernova is getting worse and worse - down half the time.

[sp_]

Zpool.ca and yiimp.ccminer.org is working good.

[ExcelThroughKnowledge]

anyone having issues with dwarfpool? suddenly all my miners stopped showing rates. I'm having 0 hash for eth and dcr but my miners are still accepting work and running. Anything wrong here?

[fredeq]

anyone having issues with dwarfpool? suddenly all my miners stopped showing rates. I'm having 0 hash for eth and dcr but my miners are still accepting work and running. Anything wrong here?

All good on my side

[dannygroove]

What pool are you guys using for DCR?  It seems like supernova is getting worse and worse - down half the time.

Suprnova is the worst functioning pool I have ever stumbled upon. And trust me, seen shitty ones before.

anyone having issues with dwarfpool? suddenly all my miners stopped showing rates. I'm having 0 hash for eth and dcr but my miners are still accepting work and running. Anything wrong here?

Im having the same issue and I know there's other people too. Seems like a frontend problem... maybe ddos? It hasnt affected my work, I think. It corrects itself randomly and shows as if nothing happened. Weird and uncomfortable, if this keeps going I'll switch.

[MysteryX]

I've been testing undervolting on some 290x's, if i undervolt then start the miner the computer totally locks up, but if i adjust the voltage once the miner is running it seems fine?