SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[mk111]

Dok - you need to set your Vega 56 fans to minumum 3000RPM because the card will throttle itself if the HBM2 memory gets too hot.

[doktor83]

Dok - you need to set your Vega 56 fans to minumum 3000RPM because the card will throttle itself if the HBM2 memory gets too hot.

i know, but this was just a quick test to show off  
kid was sleeping didnt want to turn on the turbine

[mk111]

Dok - you need to set your Vega 56 fans to minumum 3000RPM because the card will throttle itself if the HBM2 memory gets too hot.

i know, but this was just a quick test to show off  
kid was sleeping didnt want to turn on the turbine

LOL true the vega's are loud

[sweetydady]

https://fex.net/705696997813

maybe you got extra line in your wallet, you can try this file :

https://fex.net/053237526737/578306179?fileId=578312312

no, nothing

Have you tried delete the comma at the end of last paranthesis. That comma is seperating multiple pools but you have only one pool. Maybe that will work.


 One other thing is your pool has an announcement about "2018-07-05 Pool is ready for hardfork at 150000, and accepts Sumo, Sumi, Subo, RYoL, RYoN, RYoS addresses".
Maybe your RYoL adress is not supported yet since blockchain did not reach the fork height.

thanks a lot everyone! maybe you are right, I should wait till fork happen and then my address will work. thank you

Update:
it doesnt start with tradeogre address either

[doktor83]

In 1.6.2 on cn-v7 algo intensity higher 100 not give jumps and drops in hashrate like it was on 1.6.1. But speed is low on v7... I tried 54,56,72,90,108,116 but all these intensities gives max 985 h/s on my RX 580 8Gb cards. On 1.6.0 I have 1030-1040 h/s...
Maybe I do something wrong? I tried to wait up to 10 min every try. But speed didn't jumps like in heavy algo. It pretty stable. Couse of it I didn't wait any longer.
Who got speed higher 1000 h/s on v7 with 1.6.2? Share your settings, please...

Same issue: 1.6.0 gets 1080 h/s on RX 588, but 1.6.2 - only 1025 h/s with same config.

Looks like that some optimisations that work nicely for vega degrade performance on rx.
I will rework my kernel so the speed should be back to v1.6.0 speeds on rx.

[UnclWish]

In 1.6.2 on cn-v7 algo intensity higher 100 not give jumps and drops in hashrate like it was on 1.6.1. But speed is low on v7... I tried 54,56,72,90,108,116 but all these intensities gives max 985 h/s on my RX 580 8Gb cards. On 1.6.0 I have 1030-1040 h/s...
Maybe I do something wrong? I tried to wait up to 10 min every try. But speed didn't jumps like in heavy algo. It pretty stable. Couse of it I didn't wait any longer.
Who got speed higher 1000 h/s on v7 with 1.6.2? Share your settings, please...

Same issue: 1.6.0 gets 1080 h/s on RX 588, but 1.6.2 - only 1025 h/s with same config.

Looks like that some optimisations that work nicely for vega degrade performance on rx.
I will rework my kernel so the speed should be back to v1.6.0 speeds on rx.

Good! We're waiting...

[Lio78]

Hi Doktor.

Good job with your miner.

I have 1 580 bios mod and 1 Vega64 table-mod
And I have 930 and 2090 hashrate.

Only one question, Can I set restart pool every 12-15 hours?
How?

[wgestickley]

@Doc

I am a happy User for your Miner and appreciate your Work 💪

Just with my RX580, 8GB RIG‘s I have the „legendary“ Problem, that after a Pool Switch the HR drops to 950 ish and only recovers to 1040 H/s  after Start of GPU-Z and let it run for a few Minutes...

I use Version 1.6.0 / 1.6.1 and CN Heavy Algo

Can you fix this issues?
Thx

[roma__11]

Cryptonight-saber ?
https://cryptoknight.cc/ipbc/#getting_started

[dingdongtobias]

Cryptonight-saber ?
https://cryptoknight.cc/ipbc/#getting_started

Cryptonight-saber = bittubev2

[treanski]

In 1.6.2 on cn-v7 algo intensity higher 100 not give jumps and drops in hashrate like it was on 1.6.1. But speed is low on v7... I tried 54,56,72,90,108,116 but all these intensities gives max 985 h/s on my RX 580 8Gb cards. On 1.6.0 I have 1030-1040 h/s...
Maybe I do something wrong? I tried to wait up to 10 min every try. But speed didn't jumps like in heavy algo. It pretty stable. Couse of it I didn't wait any longer.
Who got speed higher 1000 h/s on v7 with 1.6.2? Share your settings, please...

Same issue: 1.6.0 gets 1080 h/s on RX 588, but 1.6.2 - only 1025 h/s with same config.

Looks like that some optimisations that work nicely for vega degrade performance on rx.
I will rework my kernel so the speed should be back to v1.6.0 speeds on rx.

goo doktor goo need more hash ^^

[LeonManveli]

Why are almost all the XMR coins in the Maintenance mode?

[UAGet]

Why are almost all the XMR coins in the Maintenance mode?

Very interesting question 

[UAGet]

Why are almost all the XMR coins in the Maintenance mode?

Haven, Monero, Turtlecoin, ByteCoin is already online on TradeOgre! Wallets started to turn on.

[christiano88]

Why are almost all the XMR coins in the Maintenance mode?

Haven, Monero, Turtlecoin, ByteCoin is already online on TradeOgre! Wallets started to turn on.

Is it true that I lost all that was transferred to tradeogre while it was in maintenance mode with the wallets I was using (loki, haven, bittube)?
For example, I should have had more haven, but found only the last transfer from yesterday evening when everything went into maintenance mode, and the pool shows one more transfer today, that doesn't show on tradeogre. How can I contact them (there's nothing onsite regarding that)?

[UAGet]

After defrosting wallets, all coins must successfully come in a wallet. Some pools, for example, the miner.rocks, made a special button for forced payments to the stock exchange.
http://scrin.org/i/18/07/20180706204121.png

[christiano88]

After defrosting wallets, all coins must successfully come in a wallet. Some pools, for example, the miner.rocks, made a special button for forced payments to the stock exchange.

I was mining on a different pool that didn't offer that, so in the end, I am still getting my coins, right?

[heavyarms1912]

Why are almost all the XMR coins in the Maintenance mode?

there's a bug
fix double counting outs if the tx pubkey is duplicated

https://github.com/monero-project/monero/commit/58cceaad7102c8e1c7130c47fa22cdb50eab97e8

most likely incorporating fixes

[UAGet]

///so in the end, I am still getting my coins, right?

Hope dies last 

[LeonManveli]

Why are almost all the XMR coins in the Maintenance mode?

there's a bug
fix double counting outs if the tx pubkey is duplicated

https://github.com/monero-project/monero/commit/58cceaad7102c8e1c7130c47fa22cdb50eab97e8

most likely incorporating fixes

Thanks.