SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[livada]

INFO - TEST VEGA 56 PowerColor

3*Vega56 flashed to 64
Crimson-ReLive-Beta-Blockchain driver
SRBminer 1.4.9
GPU - 1442/1437/1407mhz 905-907mv
MEM - 1095/1100mhz 900mv

Cryptonight V7(monero)
"intensity" : 120  HR=6000 - 560W
https://image.prntscr.com/image/rK5kLVCPQQS89xDEIYhHgQ.jpg

Cryptonight lite(aeon)
"intensity" : 235  HR=12900 - 570W
https://image.prntscr.com/image/23TkvCkvRMCvC9p2YhxiCQ.jpg

Cryptonight liteV7(trtl)
"intensity" : 235  HR=12900 - 570W
https://image.prntscr.com/image/Xb6WiZ1EQaS5UMmWq3KHuw.jpg

Cryptonight ultraheavy-lightv3(ipbc)
"intensity" : 239  HR=11100 - 550W
https://image.prntscr.com/image/PeiajoLsTJO3Zwc1ZX8f8A.jpg

Cryptonight heavy(sumo)
"intensity" : 56  HR=4550 - 530W
https://image.prntscr.com/image/2xW89wB8SxaZeSWX1n6zjQ.jpg

Cryptonight artocache(arto)
"intensity" : 118  HR=5400 - 550W
https://image.prntscr.com/image/AopDRnW8R0m9EDnqyB8-aw.jpg

@livada
GPU - 1442/1437/1407mhz 905-907mv
MEM - 1095/1100mhz 900mv
power target = ??

please share overdriventool settings or powerplay settings
thnks

I not use overdriventool. i use only watman.
power target is default
this is all what you need
gpu and mem mhz and mv power.
this is gpu for p7

EDIT: i dl overdrive and this is SS . i not use ovedrive i use watman. This is only for this SS
https://image.prntscr.com/image/MiKMDVu8R0aM2lDch2kFeg.jpg

EDIT 2 : GPUz SS - GPU Z shut down HBM memory and i must again use xmr-stak for enable HBM
https://image.prntscr.com/image/xuVWWQbuS_6aKHDhJSb9eA.jpghttps://image.prntscr.com/image/FIIBH1ikQr2fG5XoagMEtQ.jpghttps://image.prntscr.com/image/CnZjke6dQimk6DSA27SP1Q.jpg

[1714126124]

1714126124

[1714126124]

1714126124

[1714126124]

1714126124

[1714126124]

1714126124

[1714126124]

1714126124

[1714126124]

1714126124

[d2bg]

I'm having problems with the alloy algorithm.  About 50% of the time when I check hashrate, 1 or 2 of my GPUs will report 0.  A few seconds later, they will be back to normal (or new ones will report 0).  This happens on all of my GPUs (rx580s).

[doktor83]

I'm having problems with the alloy algorithm.  About 50% of the time when I check hashrate, 1 or 2 of my GPUs will report 0.  A few seconds later, they will be back to normal (or new ones will report 0).  This happens on all of my GPUs (rx580s).

dont leave on auto intesity, lower it by hand.

[Lunga Chung]

I have 15 rigs mining with SRBminer. (84 cards)

But, every time that a new version comes it takes me a lot of time to update all the rigs.

So..
My question is this: is there any Rig management software or something similar for Windows?

A software that can be used to update all the rigs at once?
A software that can connect to each machine (rig) and execute for example a script or batch of commands for each computer?

I wonder..
How do these people or companies that have a greater number of cards or a huge farm of GPUs like Genesys Mining to solve these problems?

Well if you have all your rigs at one place just setup an ordinary PC as Radmin server. I use TW to access that PC and just use the depoly tool in Radmin to push instalation to all the miners.

Awesome Miner is yet to support SRBMiner (hope soon).

[4ward]

Thanks for adding API

Added miner to Forager - automatic profit switching miner

[doktor83]

Thanks for adding API

Added miner to Forager - automatic profit switching miner

Thank you for adding it in Forager Cheers!

[mutual.consent]

INFO - TEST VEGA 56 PowerColor

3*Vega56 flashed to 64
Crimson-ReLive-Beta-Blockchain driver
SRBminer 1.4.9
GPU - 1442/1437/1407mhz 905-907mv
MEM - 1095/1100mhz 900mv

Cryptonight heavy(sumo)
"intensity" : 56  HR=4550 - 530W
https://image.prntscr.com/image/2xW89wB8SxaZeSWX1n6zjQ.jpg

I manage to get 4044 h/s using SRB with these sorts of clocks on my Vegas. What does your config file look like apart from intensity at 56?

your HBM memory not work. reset card and start again.

If HBM not work i have only 1300-1350 per card and i must start xmr-stak and back to srbminer. WHY? i dont now.

Doctor any idea? i reset card but  HBM not start. when i use xrm stak with this xomand HBM start normal and after this all miner work fine with HBM memory.

This option start HBM memory
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
start xmr-stak --noCPU
exit 0

"verbose_level" : 3,
"print_motd" : true,
"h_print_time" : 60,
"aes_override" : null,
"use_slow_memory" : "warn",
"tls_secure_algo" : true,
"flush_stdout" : false,

if i use xmr stak with this option HBM  start OK.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
{ "index" : 0, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 0, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
"platform_index" : 0,

after this start  HBB ON .Why ? i dont now.
with srb miner i try but never HBM start corect if not start first time.

if i use xmr stak with this otion HBM not start.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 0,  "intensity" : 896, "worksize" : 8,    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 0,  "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },
{ "index" : 1, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,  "comp_mode" : true  },
{ "index" : 2, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 2, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },

Thanks - have confirmed that strangely your suggestion works. Now at 4405 h/s. Maybe this issue wouldn't exist on the latest Adrenaline drivers?

[madmossy]

So the API lets us read the stats while mining, is it possible to change pool/algo with just command line options or do you need the config files.

[sidaliroy]

Thanks for adding API

Added miner to /2wagBKX]Forager - automatic profit switching miner

Thank you for adding it in Forager Cheers!

Does the API work with EthMan (Claymore Remote Manager)?

[livada]

INFO - TEST VEGA 56 PowerColor

3*Vega56 flashed to 64
Crimson-ReLive-Beta-Blockchain driver
SRBminer 1.4.9
GPU - 1442/1437/1407mhz 905-907mv
MEM - 1095/1100mhz 900mv

Cryptonight heavy(sumo)
"intensity" : 56  HR=4550 - 530W
https://image.prntscr.com/image/2xW89wB8SxaZeSWX1n6zjQ.jpg

I manage to get 4044 h/s using SRB with these sorts of clocks on my Vegas. What does your config file look like apart from intensity at 56?

your HBM memory not work. reset card and start again.

If HBM not work i have only 1300-1350 per card and i must start xmr-stak and back to srbminer. WHY? i dont now.

Doctor any idea? i reset card but  HBM not start. when i use xrm stak with this xomand HBM start normal and after this all miner work fine with HBM memory.

This option start HBM memory
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
start xmr-stak --noCPU
exit 0

"verbose_level" : 3,
"print_motd" : true,
"h_print_time" : 60,
"aes_override" : null,
"use_slow_memory" : "warn",
"tls_secure_algo" : true,
"flush_stdout" : false,

if i use xmr stak with this option HBM  start OK.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
{ "index" : 0, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 0, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
"platform_index" : 0,

after this start  HBB ON .Why ? i dont now.
with srb miner i try but never HBM start corect if not start first time.

if i use xmr stak with this otion HBM not start.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 0,  "intensity" : 896, "worksize" : 8,    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 0,  "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },
{ "index" : 1, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,  "comp_mode" : true  },
{ "index" : 2, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 2, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },

Thanks - have confirmed that strangely your suggestion works. Now at 4405 h/s. Maybe this issue wouldn't exist on the latest Adrenaline drivers?

but works:)

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

[lebuawu2]

INFO - TEST VEGA 56 PowerColor

3*Vega56 flashed to 64
Crimson-ReLive-Beta-Blockchain driver
SRBminer 1.4.9
GPU - 1442/1437/1407mhz 905-907mv
MEM - 1095/1100mhz 900mv

Cryptonight heavy(sumo)
"intensity" : 56  HR=4550 - 530W

I manage to get 4044 h/s using SRB with these sorts of clocks on my Vegas. What does your config file look like apart from intensity at 56?

your HBM memory not work. reset card and start again.

If HBM not work i have only 1300-1350 per card and i must start xmr-stak and back to srbminer. WHY? i dont now.

Doctor any idea? i reset card but  HBM not start. when i use xrm stak with this xomand HBM start normal and after this all miner work fine with HBM memory.

This option start HBM memory
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
start xmr-stak --noCPU
exit 0

"verbose_level" : 3,
"print_motd" : true,
"h_print_time" : 60,
"aes_override" : null,
"use_slow_memory" : "warn",
"tls_secure_algo" : true,
"flush_stdout" : false,

if i use xmr stak with this option HBM  start OK.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
{ "index" : 0, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 0, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
"platform_index" : 0,

after this start  HBB ON .Why ? i dont now.
with srb miner i try but never HBM start corect if not start first time.

if i use xmr stak with this otion HBM not start.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 0,  "intensity" : 896, "worksize" : 8,    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 0,  "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },
{ "index" : 1, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,  "comp_mode" : true  },
{ "index" : 2, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 2, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },

Thanks - have confirmed that strangely your suggestion works. Now at 4405 h/s. Maybe this issue wouldn't exist on the latest Adrenaline drivers?

but works:)

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

Actually by setting intensity 60 and work size 8 it will work also (enable HBM) after that you close the miner set intensity 56 then run the miner again it will increase hash rate. but still a bit difficult to automate.

[heavyarms1912]

@dok has the open CL devices ordering ( device initialization based on BUS id order) sorted out in latest version or yet to be implemented?

[doktor83]

@dok has the open CL devices ordering ( device initialization based on BUS id order) sorted out in latest version or yet to be implemented?

soon, now that the API is done, i will continue with the wishlist 

[gzpc01]

Please ! support for linux version ! 

[doktor83]

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

As i don't have vega gpu's i can't really help you, but if you use "restart_devices_on_startup" with the new "restart_devices_on_startup_script", it should give back full speed to your Vegas, and in the script you can add undervolting overclocking etc with overdriventool.

Or try what @lebuawu2 wrote.
But the disable/enable should be enough tho.

Download V1.5.1 and try it.

[lebuawu2]

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

As i don't have vega gpu's i can't really help you, but if you use "restart_devices_on_startup" with the new "restart_devices_on_startup_script", it should give back full speed to your Vegas, and in the script you can add undervolting overclocking etc with overdriventool.

Or try what @lebuawu2 wrote.
But the disable/enable should be enough tho.

Download V1.5.1 and try it.

disable and enable only work for blockchain driver for CN / CN-V7 maybe for CN-Heavy also. for new driver 18.3.4 no need to disable and enable again in order to get best hashrate for CN / CN-V7 but for CN-Heavy apparently didn't work.

[Sgsg666]

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

As i don't have vega gpu's i can't really help you, but if you use "restart_devices_on_startup" with the new "restart_devices_on_startup_script", it should give back full speed to your Vegas, and in the script you can add undervolting overclocking etc with overdriventool.

Or try what @lebuawu2 wrote.
But the disable/enable should be enough tho.

Download V1.5.1 and try it.

I already have JJreset tool, it doesnt use devcon (http://vega.miningguides.com/p/auto-run-miner-without-hashmonitor.html).  Does "restart_devices_on_startup"/devcon needs admin privileges when run?

[ysakay]

Hi Guys.

Can i undervolt wit miner bat like claymore for ex -cclock 1100 -cvddc 900 ?

[henri2018]

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

As i don't have vega gpu's i can't really help you, but if you use "restart_devices_on_startup" with the new "restart_devices_on_startup_script", it should give back full speed to your Vegas, and in the script you can add undervolting overclocking etc with overdriventool.

Or try what @lebuawu2 wrote.
But the disable/enable should be enough tho.

Download V1.5.1 and try it.

disable and enable only work for blockchain driver for CN / CN-V7 maybe for CN-Heavy also. for new driver 18.3.4 no need to disable and enable again in order to get best hashrate for CN / CN-V7 but for CN-Heavy apparently didn't work.

Agreed with you, lebuawu2. Disable-enable vega is not needed anymore when using 18.3.4 driver. Been using it for at least a month.

[doktor83]

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

As i don't have vega gpu's i can't really help you, but if you use "restart_devices_on_startup" with the new "restart_devices_on_startup_script", it should give back full speed to your Vegas, and in the script you can add undervolting overclocking etc with overdriventool.

Or try what @lebuawu2 wrote.
But the disable/enable should be enough tho.

Download V1.5.1 and try it.

I already have JJreset tool, it doesnt use devcon (http://vega.miningguides.com/p/auto-run-miner-without-hashmonitor.html).  Does "restart_devices_on_startup"/devcon needs admin privileges when run?

Yes it needs admin privileges to disable/enable devices. That JJ script uses powershell to do the same thing, i saw that.