Trongersoll
|
|
April 24, 2013, 09:19:08 PM |
|
i tried getting help in my own thread and mostly got ignored. those that tried to help did in some instances. This thread is much too long to find things. that being said, i'm trying to install cgminer on a virgin Ububtu box. Once i figured out that configure had to be run to compile i've started making progress. I'm now getting the error:
configure: error: Missing required libcurl dev >= 7.18.2
I have libcurl3 installed, but i don't know if that means anything in this instance.
exactly what it says... you DO NOT have a version that is greater than or equal to 7.18.2 as an option you might want to follow the link in my sig where I built a centos cgmining box. Do you really think this response was helping? I understand that people who regularly do support get tired of, what to them, seems like stupid/simple questions. a proper response would have been to tell me how to get/install the missing part. Implying that i can't read was no help, and referring to your canned installation using a different flavor of Linux didn't help either. I hate to be short with people that i am begging for help, but, really. Mining isn't for everyone. The author of cgminer mostly does this in his spare time, relying on contributions from users to keep the development going. Linux certainly isn't for everyone. I'm a computer geek, and I can't stand linux. Every year or so I try it again, and I end up getting too frustrated with the nonsensical parts of it and go back to Windows. I simply don't have the time to put into figuring out all the intricacies of linux and figuring out why something doesn't work the way it's supposed to. So, if you can't figure out how to compile on a platform that requires compiling, you're at the mercy of the linux geeks to help. If you don't like that, perhaps you shouldn't be using linux. M heh, I'm a computer Geek as well. i got my B.S. in Comp Sci in 1979. I first used Unix as a user in the early 80's. Around 2003 i even wrote a Linux device driver for a specialized PCI board. The thing is i've been retired for 7 years and things have changed. I'm just going through startup pains at the moment. i had never seen ./configure before i was expecting a make file to do the build. Things have change enough that i'm basically starting over with Linux.
|
|
|
|
tiktoc
|
|
April 24, 2013, 09:29:57 PM |
|
git just equals a better/fancy code version repository based on cvs which you may have used http://cheat.errtheblog.com/s/gittwo main commands you want git clone giturl (makes a clone of a git repository) git checkout branch/verison (changes to a different branch/version in you local copy of the repository)eg in the bitcoin one master has all the latest pulls(patches) that have been accepted, version 0.8.1 was the lastest release
|
|
|
|
Humanxlemming
|
|
April 24, 2013, 10:07:25 PM |
|
Hey
Do you know when you will be adding bfl asic or do you only know that avalon works?
|
|
|
|
DrGuns4Hands
|
|
April 24, 2013, 10:10:37 PM |
|
3.0.1 took my prior problems with 2.11.4 and 3.0.0 and made them even worse now, instead of getting hardware errors from my 5870 and the other card running fine 3.0.1 errors out before it even starts hashing with a cgminer.exe has stopped working windows.
EDIT: It appears the crashing out before it starts issue only happens with the 7zip file. The regular zip file starts fine, although it still hasn't fix the GPU1: invalid nonce - HW error I mentioned earlier. That started in 2.11.4
re-post: cgminer 2.11.4 and 3.0.0 I get an error GPU1 invalid nonce: HW error on my radeon hd 5870 runs fine under 2.11.3, even looks like it's producing normal hashes on the other 2 versions all the averages look right the 5s and avg values show what both of my cards together produce, except the 5870 is all HW error's and not sending shares to the pool for that card. Other card is a 7970 if that matters. Running windows 7 x64. Not sure what changed between 2.11.3 and 2.11.4+ to cause this problem.
|
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
April 24, 2013, 10:33:45 PM |
|
Hey
Do you know when you will be adding bfl asic or do you only know that avalon works?
I'll add BFL SC when I get one Supposedly posted to me only a day ago ... no idea who got the other of the first 2 almost a week ago - I guess BFL wasn't all that interested in getting the most used miner software working with their devices first (though as I've said before they probably could have had problems sorted a week earlier if they'd started with cgminer first) I've already written the basic driver, but I don't intend to brick people's ASICs by sending out untested code ... be wary of cheap imitations ...
|
|
|
|
pekv2
|
|
April 24, 2013, 10:42:58 PM |
|
Thanks for the update and the hard work, ckolivas.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
April 24, 2013, 11:06:26 PM |
|
Thanks for the update and the hard work, ckolivas.
You're most welcome
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
April 25, 2013, 01:12:48 AM |
|
I just updated my drivers to 13.4, and CGMiner can't compile some of the .cl kernels into .bin files. Specifically: poclbm, phatk, and diakgcn all work, but diablo and scrypt do not. Program just crashes with no error message, but with -D -T --verbose, it is during the kernel compile portion.
Gigabyte 7970 Win8x64 13.4 drivers OpenCL 1.2 <1124.4> CGMiner 3.0.1
Doesn't affect me much, as poclbm gives me the best results, but I figured I'd let you know.
|
|
|
|
eroxors
Legendary
Offline
Activity: 924
Merit: 1000
Think. Positive. Thoughts.
|
|
April 25, 2013, 04:57:35 AM |
|
Two questions.
1. Can you run scrypt and sha256 on different threads on the same GPU in one instance of cgminer or is a 2nd instance required?
2. When the number of shaders is flagged at a lower amount than available, are only the number of shaders specified utilized?
I'm specifically wondering if, for example, a 5770 could have its shaders halved and 400 could mine scrypt and utilize the majority of the card's memory while the other 400 mine sha256.
Just curious! Thanks!
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
April 25, 2013, 05:22:15 AM |
|
You need 2 instances if it works at all
|
|
|
|
SkyNet
Member
Offline
Activity: 80
Merit: 10
|
|
April 25, 2013, 11:44:41 AM |
|
Just installed 13.4 and I am getting a very strange behavior. I am in windows 7 64bit I am starting the program with the flags, fans spin and so on, mining seems to work however I am not seeing anything in the command prompt window - it is totally blank! Has anyone encountered something similar?
|
Tips: 1JmQ78JprWePM3EapnacPFfAtTrob8ofmU
|
|
|
Tigggger
Legendary
Offline
Activity: 1098
Merit: 1000
|
|
April 25, 2013, 12:00:59 PM |
|
I have a dual 5970 rig but 1 of the 4 GPU's is no good (GPU0)
I use -d 1 -d 2 -d 3 in my command line but when I start cgminer is seems to turn gpu0 on and off a couple of times before finally disabling it and during this cycling the system sometimes crashes.
Is there an alternative way to stop it being used ?
|
|
|
|
gyverlb
|
|
April 25, 2013, 12:04:15 PM |
|
I have a dual 5970 rig but 1 of the 4 GPU's is no good (GPU0)
I use -d 1 -d 2 -d 3 in my command line but when I start cgminer is seems to turn gpu0 on and off a couple of times before finally disabling it and during this cycling the system sometimes crashes.
Is there an alternative way to stop it being used ?
Remove it from your Xorg configuration if you use Linux.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
April 25, 2013, 12:08:32 PM |
|
I have a dual 5970 rig but 1 of the 4 GPU's is no good (GPU0)
I use -d 1 -d 2 -d 3 in my command line but when I start cgminer is seems to turn gpu0 on and off a couple of times before finally disabling it and during this cycling the system sometimes crashes.
Is there an alternative way to stop it being used ?
--remove-disabled
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
jmfg187
Member
Offline
Activity: 84
Merit: 10
|
|
April 25, 2013, 12:42:51 PM |
|
Can you help me figure out what is wrong when I try to use 3.0.1? It is specific to this new version because 2.11.4 is still working. I am on Windows 7 x64 with all the updates and I have a 6970 in it. cgminer.exe caused an Access Violation at location 004312fa in module cgminer.exe Reading from location 052d51ce.
Registers: eax=00000000 ebx=0028f03c ecx=00000000 edx=00000000 esi=0200a8c8 edi=0206266a eip=771b15de esp=0028f028 ebp=0028f558 iopl=0 nv up ei pl zr na po nc cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000246
Call stack: 771B15DE ntdll.dll:771B15DE ZwRaiseException 0043341B cgminer.exe:0043341B 00430291 cgminer.exe:00430291 00418D16 cgminer.exe:00418D16 004010B9 cgminer.exe:004010B9 __mingw_CRTStartup crt1.c:244
00401284 cgminer.exe:00401284 WinMainCRTStartup crt1.c:274
76B333AA kernel32.dll:76B333AA BaseThreadInitThunk 771C9EF2 ntdll.dll:771C9EF2 RtlInitializeExceptionChain 771C9EC5 ntdll.dll:771C9EC5 RtlInitializeExceptionChain
Thank you!
|
BTC: 17nmAJ5N2fKMTGymAarp4DUPXjHkohacXQ LTC: LUzmyjMuVWyU9coa7iEQYgGWKDBKRsiLmo NVC: 4Pby77nChLzU2rsi2RsLpM8C95dKF5XTbg FC: 6nKefP46bnT3P1XP9jaEugYd84UdW4zrL3
|
|
|
Tigggger
Legendary
Offline
Activity: 1098
Merit: 1000
|
|
April 25, 2013, 12:50:50 PM |
|
I have a dual 5970 rig but 1 of the 4 GPU's is no good (GPU0)
I use -d 1 -d 2 -d 3 in my command line but when I start cgminer is seems to turn gpu0 on and off a couple of times before finally disabling it and during this cycling the system sometimes crashes.
Is there an alternative way to stop it being used ?
--remove-disabled Thanks
|
|
|
|
FiatKiller
|
|
April 25, 2013, 01:34:50 PM |
|
Two questions.
1. Can you run scrypt and sha256 on different threads on the same GPU in one instance of cgminer or is a 2nd instance required?
2. When the number of shaders is flagged at a lower amount than available, are only the number of shaders specified utilized?
I'm specifically wondering if, for example, a 5770 could have its shaders halved and 400 could mine scrypt and utilize the majority of the card's memory while the other 400 mine sha256.
Just curious! Thanks!
I asked ck yesterday about running two instances from two different directories and he said: Fine to run two. Just use --remove-disabled as well as -d so both instances dont try to fight over GPUs.
|
|
|
|
eroxors
Legendary
Offline
Activity: 924
Merit: 1000
Think. Positive. Thoughts.
|
|
April 25, 2013, 02:33:28 PM |
|
Two questions.
1. Can you run scrypt and sha256 on different threads on the same GPU in one instance of cgminer or is a 2nd instance required?
2. When the number of shaders is flagged at a lower amount than available, are only the number of shaders specified utilized?
I'm specifically wondering if, for example, a 5770 could have its shaders halved and 400 could mine scrypt and utilize the majority of the card's memory while the other 400 mine sha256.
Just curious! Thanks!
I asked ck yesterday about running two instances from two different directories and he said: Fine to run two. Just use --remove-disabled as well as -d so both instances dont try to fight over GPUs. Thanks. Makes sense. Any idea about the shaders? I assume it's impossible to target specific groups of shaders and the option is simply for configuration, but I wanted to confirm.
|
|
|
|
FiatKiller
|
|
April 25, 2013, 02:44:01 PM |
|
I'll defer to "the man" for that question, methinks. lol
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
April 25, 2013, 02:48:42 PM Last edit: April 25, 2013, 03:01:22 PM by ckolivas |
|
--shaders is just a hint to tune the program, it has no effect on the GPU. There is some advanced code to partition GPUs with OpenCL to do different tasks, but that is way beyond the scope of what we do with mining, and does not partition some shaders off as such. Mining both concurrently will likely produce lower results than the sum of each at half or at best, just equalling the sum of the halves. I suspect scrypt will kill the btc mining as well so you'll get very unbalanced work in favour of scrypt.
Summary, don't waste your time. Mine one or the other.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
|