SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[zeef]

Next version peek, Vega56 bittubev2 algo :

https://image.ibb.co/b6fMwd/1111.jpg

Dok,

Have u using the softpowerplaytables?

I only get this hashes with my gpu on 1592 Mhz, but consomes 150 watts anyway

Thanks

[1713510967]

1713510967

[1713510967]

1713510967

[1713510967]

1713510967

[1713510967]

1713510967

[desdichadohuiado]

Quite often I stuck on a "Compiling kernel for GPU1 ..." . Just one GPU has this problem. I have to reboot it several times, until it works. Not sure what happens. Does anyone else have this problem?

[bigassboy]

Quite often I stuck on a "Compiling kernel for GPU1 ..." . Just one GPU has this problem. I have to reboot it several times, until it works. Not sure what happens. Does anyone else have this problem?

Yes, same thing happens to me as well..

[doktor83]

Quite often I stuck on a "Compiling kernel for GPU1 ..." . Just one GPU has this problem. I have to reboot it several times, until it works. Not sure what happens. Does anyone else have this problem?

set only the problematic card in gpu_conf run miner it will nake binary then return all cards in conf. Maybe this will help

[doktor83]

Next version peek, Vega56 bittubev2 algo :

Dok,

Have u using the softpowerplaytables?

I only get this hashes with my gpu on 1592 Mhz, but consomes 150 watts anyway

Thanks

yup, powerplay table in registry

[treanski]

Next version peek, Vega56 bittubev2 algo :

Dok,

Have u using the softpowerplaytables?

I only get this hashes with my gpu on 1592 Mhz, but consomes 150 watts anyway

Thanks

with powerplay tables you can only save energy, if you get this hashes with 1592mhz then your miner config is not good

[livada]

Next version peek, Vega56 bittubev2 algo :

https://image.ibb.co/b6fMwd/1111.jpg

Dok,

Have u using the softpowerplaytables?

I only get this hashes with my gpu on 1592 Mhz, but consomes 150 watts anyway

Thanks

with powerplay tables you can only save energy, if you get this hashes with 1592mhz then your miner config is not good

OR have GPU with hynix memori . Only samsung have this HR.

Ths is referal veg56 card with samsung:
https://image.prntscr.com/image/gHSDzoaZRs2iYWyBUyia-A.jpg

and this is vega56 nitro+ with hynix: hynix is BAD and have  bad HR and use more power.
https://image.prntscr.com/image/zLyCrX2YRS6cmn5yR0pD-A.jpg

[desdichadohuiado]

Quite often I stuck on a "Compiling kernel for GPU1 ..." . Just one GPU has this problem. I have to reboot it several times, until it works. Not sure what happens. Does anyone else have this problem?

set only the problematic card in gpu_conf run miner it will nake binary then return all cards in conf. Maybe this will help

did not work

[avvis]

I have been experiencing a problem since 1.6 version where my connection to the pool is refused.   the same configuration files under 1.5.3 work fine.   The message i receive is " ERROR:  No connection could be made because the target machine actively refused it."   thank for all suggestions!

[zeef]

Next version peek, Vega56 bittubev2 algo :

https://image.ibb.co/b6fMwd/1111.jpg

Dok,

Have u using the softpowerplaytables?

I only get this hashes with my gpu on 1592 Mhz, but consomes 150 watts anyway

Thanks

with powerplay tables you can only save energy, if you get this hashes with 1592mhz then your miner config is not good

Hi dok,

With new drives i just think we dont need softpowertables, in my hwinfo info i got in gpu clock 1430mhz, even that in overdriventool or srbminer appear 1592 mhz From wall i got 145 watts

Can you share your printscreen of hwinfo?

Regards

[zeef]

Next version peek, Vega56 bittubev2 algo :

https://image.ibb.co/b6fMwd/1111.jpg

Dok,

Have u using the softpowerplaytables?

I only get this hashes with my gpu on 1592 Mhz, but consomes 150 watts anyway

Thanks

with powerplay tables you can only save energy, if you get this hashes with 1592mhz then your miner config is not good

OR have GPU with hynix memori . Only samsung have this HR.

Ths is referal veg56 card with samsung:
https://image.prntscr.com/image/gHSDzoaZRs2iYWyBUyia-A.jpg

and this is vega56 nitro+ with hynix: hynix is BAD and have  bad HR and use more power.
https://image.prntscr.com/image/zLyCrX2YRS6cmn5yR0pD-A.jpg

yes its samsung and from gearbest an yeston brand (just got lucky)



Regards

[Elder III]

So do I understand correctly that the current version of the miner doesn't compile the kernel(s) every time it launches, or does it still do that?  We're on 1.5.8 still and it's been mostly stable for us, but it would be nice to get the same hashrate every time the miner is launched.

[avvis]

When i launch the miner under 1.6 thru 1.62 i receive two messages stating "loading kernel for Device bus ID 1 ...."   These messages are about 1 second appart.     CryptonightV7 mode enabled.   ADL  initialised successfully and the proper pool name.  Then the error appears indicating that the connection was refused.  

https://prnt.sc/k3rkv7

[bruslie]

1.6.1 is doing on stellite algo 100 hash more than 1.6.2 .... 

[nightfury626]

if Dev refuses to make one for linux, is this miner open sourced and can someone make a linux version please?

[zeef]

doktor,

this is happening mining bittubev2 in v1.6.2,
in other rigs is the same.. after a time i got an hasdropped.

Take a printscreen:

https://ibb.co/mnEFbo

Thanks

[locbet]

Next version peek, Vega56 bittubev2 algo :

https://image.ibb.co/b6fMwd/1111.jpg

Dok,

Have u using the softpowerplaytables?

I only get this hashes with my gpu on 1592 Mhz, but consomes 150 watts anyway

Thanks

with powerplay tables you can only save energy, if you get this hashes with 1592mhz then your miner config is not good

OR have GPU with hynix memori . Only samsung have this HR.

Ths is referal veg56 card with samsung:
https://image.prntscr.com/image/gHSDzoaZRs2iYWyBUyia-A.jpg

and this is vega56 nitro+ with hynix: hynix is BAD and have  bad HR and use more power.
https://image.prntscr.com/image/zLyCrX2YRS6cmn5yR0pD-A.jpg

yes its samsung and from gearbest an yeston brand (just got lucky)



Regards

You using the softpowerplaytables .. If you have please share because my  referal veg56 card with samsung: run heavy with 1300H/s

[doktor83]

When i launch the miner under 1.6 thru 1.62 i receive two messages stating "loading kernel for Device bus ID 1 ...."   These messages are about 1 second appart.     CryptonightV7 mode enabled.   ADL  initialised successfully and the proper pool name.  Then the error appears indicating that the connection was refused.  

Something at your side because :





as simple as :

{
"pools" :
[
{"pool" : "xmr.pool.minergate.com:45700", "wallet" : "4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g", "password" : "x"}
]
}

[doktor83]

doktor,

this is happening mining bittubev2 in v1.6.2,
in other rigs is the same.. after a time i got an hasdropped.

Take a printscreen:

https://ibb.co/mnEFbo

Thanks

you need to crank up the fans to 3000rpm because hbm gets too hot that is why your hash is jumping.

[duyquang06]

Thanks Doc, i love u, my vegas finally stable with ur miner.