Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Claymore]

Yes, it sends hashrate in -esm 0.

Since I see no hashrate report, could you please give a definitely working command line for that?

As with the case of ethermine I suspect that the miner has some issues with command line parsing. At least for ethermine the shares reports depend on the command line args order. So I suspect the same is with -esm 0.

To be precise, here is the command line which does NOT report hashrate to dwarfpool:

Code:

EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal 0xab..cd -eworker rig01 -epsw monitor@email.com -esm 0

Dwarfpool help recommends to use WALLET/WORKER format. This works for me:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/SampleRig -epsw x

[elzium]

Beautiful!!! I didn't know such a product existed!  Yes, I think this is exactly what I want.  The apartment I'm in is in a bit older of a building though...buildt in something like the 60's I think.  Is there any way to test before I buy a powerline ethernet adapter?

U may test that both sockets that u will use, sit on same phase. So take multimeter and extension cord and measure all combinations and make sure u dont read 400V (or 200V in mickeyland). Tried it between two buildings and wasnt stable enough, but from one room to other no problem.

Dwarfpool help recommends to use WALLET/WORKER format. This works for me:

Thnx, finally i see it too.

[NetAlp]

i have r9 290 and now 30-31 mh/s
thanks Claymore

[zyzzyva]

Beautiful!!! I didn't know such a product existed!  Yes, I think this is exactly what I want.  The apartment I'm in is in a bit older of a building though...buildt in something like the 60's I think.  Is there any way to test before I buy a powerline ethernet adapter?

U may test that both sockets that u will use, sit on same phase. So take multimeter and extension cord and measure all combinations and make sure u dont read 400V (or 200V in mickeyland). Tried it between two buildings and wasnt stable enough, but from one room to other no problem.

In my experience, they'll usually work if both outlets go through the same circuit breaker box. You may not get streaming-video speeds, but for mining, you'll probably be fine. I recommend getting a cheap one from someplace that takes returns, though, just in case.

[osnwt]

Dwarfpool help recommends to use WALLET/WORKER format. This works for me:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/SampleRig -epsw x

This sample works.

It looks like my fault is that I always RTFM (in this case, the README!!!.txt for the miner) :-)

- the examples for ethpool/ethermine do NOT show how to use rig name;
- the example for Dwarfpool does NOT show how to use rig name, but says 'you can also specify "-eworker YourWorkerName" option' - exactly that I did and that does not work.

So for both ethermine and dwarfpool the -eworker option does not work as expected. I would recommend you either update examples with rig names, or add a note that -eworker might not work, and in that case makes sense to use pool-recommended format with dot or slash for the rig name. Since no source available, it is not obvious if wallet name should/may be concatenated with other URL options like rig or password, because there are options for them and maybe there are same in the stratum protocol variations.

[rednoW]

Dwarfpool help recommends to use WALLET/WORKER format. This works for me:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/SampleRig -epsw x

Thanks, it works for me now.
Will it work in failover epools.txt format?

POOL: eth-ru.dwarfpool.com:8008, WALLET: 0xcb35e85b4d545c92f43aa86834bc08dc3fbb8fad/hd7990, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0

[Dimasin]

3-5% Increase a little elevated. I get about 1.5%. In an hour the ethminer finds an average of 55 shares/hour, this average 56 only. My data is based on a sample of more 25,000 shares on DwarfPool with fixed difficulty.

[rednoW]

3-5% Increase a little elevated. I get about 1.5%. In an hour the ethminer finds an average of 55 shares/hour, this average 56 only. My data is based on a sample of more 25,000 shares on DwarfPool with fixed difficulty.

But this no-dagger feature is very convinient ))

[Gaglam]

Testet it over the last night.
Made no difference for me at dwarfpool. Switched back to ethminer.
I'm on Ubuntu with 4x R9 280x.

[tolazy]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

[Claymore]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

Why do you think that you need "-allpools 1" for dwarfpool? Use this:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x

[tolazy]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

Why do you think that you need "-allpools 1" for dwarfpool? Use this:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x

i get this if use that
11:37:03:820   698   
11:37:03:821   698   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
11:37:03:822   698   º   Claymore's Dual Ethereum + Decred AMD GPU Miner  v4.0 Beta   º
11:37:03:823   698   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
11:37:03:823   698   
11:37:04:023   698   This pool (eth-eu.dwarfpool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
11:37:04:025   698   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
11:37:04:025   698   Please read "Readme" file for details
11:37:04:026   698   This pool (eth-eu.dwarfpool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
11:37:04:027   698   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
11:37:04:028   698   Please read "Readme" file for details
11:37:04:028   698   Pool eth-eu.dwarfpool.com removed from the list
11:37:04:029   698   This pool (eth-eu.dwarfpool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
11:37:04:030   698   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
11:37:04:030   698   Please read "Readme" file for details
11:37:04:031   698   This pool (eth-eu.dwarfpool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
11:37:04:031   698   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
11:37:04:032   698   Please read "Readme" file for details
11:37:04:032   698   Pool eth-eu.dwarfpool.com removed from the list
11:37:04:033   698   ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.

[Claymore]

Dwarfpool help recommends to use WALLET/WORKER format. This works for me:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/SampleRig -epsw x

This sample works.

It looks like my fault is that I always RTFM (in this case, the README!!!.txt for the miner) :-)

- the examples for ethpool/ethermine do NOT show how to use rig name;
- the example for Dwarfpool does NOT show how to use rig name, but says 'you can also specify "-eworker YourWorkerName" option' - exactly that I did and that does not work.

So for both ethermine and dwarfpool the -eworker option does not work as expected. I would recommend you either update examples with rig names, or add a note that -eworker might not work, and in that case makes sense to use pool-recommended format with dot or slash for the rig name. Since no source available, it is not obvious if wallet name should/may be concatenated with other URL options like rig or password, because there are options for them and maybe there are same in the stratum protocol variations.

It's also a good idea to read RTFM for pool. I will update sample for dwarfpool, you are right, current sample is not good if you want to see hashrate.
I had to add "-eworker" because there are 3 stratum versions and many pools that also add some variants on these versions for logon process. Some pools ignore "-worker" but search worker name in wallet string, some require only wallet as username but require worker name when worker sends a share. Some work with both approaches but don't show hashrate as expected. Such problems are not related to the miner, they are because of some chaos in Ethereum stratum implementations on pools.

[Claymore]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

Why do you think that you need "-allpools 1" for dwarfpool? Use this:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x

i get this if use that

You use different command line. My command line sample cannot cause this error. If you don't believe me, ask someone here to test my command line and confirm that it works.

[tolazy]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

Why do you think that you need "-allpools 1" for dwarfpool? Use this:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x

i get this if use that

You use different command line. My command line sample cannot cause this error. If you don't believe me, ask someone here to test my command line and confirm that it works.

my bad then. i'll have a look and see what i've done wrong.

[tolazy]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

Why do you think that you need "-allpools 1" for dwarfpool? Use this:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x

i get this if use that

You use different command line. My command line sample cannot cause this error. If you don't believe me, ask someone here to test my command line and confirm that it works.

my bad then. i'll have a look and see what i've done wrong.

copy/paste the commandline from the readme change the wallet and u/p for dcr and i got the same error
This pool (eth-eu.dwarfpool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
11:56:03:329   2b58   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.

i must be stupid but there is no login for dwarf i must be missing something..
sorry for beeing the stupid one.. someone needs to be :p

[Claymore]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

Why do you think that you need "-allpools 1" for dwarfpool? Use this:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x

i get this if use that

You use different command line. My command line sample cannot cause this error. If you don't believe me, ask someone here to test my command line and confirm that it works.

my bad then. i'll have a look and see what i've done wrong.

copy/paste the commandline from the readme change the wallet and u/p for dcr and i got the same error
This pool (eth-eu.dwarfpool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
11:56:03:329   2b58   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.

i must be stupid but there is no login for dwarf i must be missing something..
sorry for beeing the stupid one.. someone needs to be :p

Do not change wallet. Works? It means that your wallet address is incorrect.

[tolazy]

why do i need -allpools 1 when mining to dwarfpool. in the example i doesnt have it.

EthDcrMiner64.exe -allpools 1 -epool eth-eu.dwarfpool.com:8008 -ewal xx -epsw x -eworker gpu1 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal x.dcr -dpsw x -dcri 40

and it 30.5-31MHs eth and about 600 dcr good speeds ? for a 390x running at 1100mhz @75c

Why do you think that you need "-allpools 1" for dwarfpool? Use this:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F/YourWorkerName -epsw x

i get this if use that

You use different command line. My command line sample cannot cause this error. If you don't believe me, ask someone here to test my command line and confirm that it works.

my bad then. i'll have a look and see what i've done wrong.

copy/paste the commandline from the readme change the wallet and u/p for dcr and i got the same error
This pool (eth-eu.dwarfpool.com) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
11:56:03:329   2b58   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.

i must be stupid but there is no login for dwarf i must be missing something..
sorry for beeing the stupid one.. someone needs to be :p

Do not change wallet. Works? It means that your wallet address is incorrect.

hm that worked.
why is my wallet wrong? i get payouts from dwarf to it

for me its strange that it works with -allpools.

i did see that my wallet had less chars then the example

relooked mist and it was 0x that was missing from my wallet. now it works.
thanx for the help.

[malandante]

UPDATE: Fixed bug with Linux build when miner is closed after some time, re-download v4.1 for Linux.

Testing again

I have been testing overnight and there is another problem. The miners don't stop mining, shares are still coming on both eth and dcr but this issue appears:

read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
...

Very fast scrolling, and cpu usage skyrockets.

[Claymore]

UPDATE: Fixed bug with Linux build when miner is closed after some time, re-download v4.1 for Linux.

Testing again

I have been testing overnight and there is another problem. The miners don't stop mining, shares are still coming on both eth and dcr but this issue appears:

read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
read(): Resource temporarily unavailable
...

Very fast scrolling, and cpu usage skyrockets.

Looks like another bug with porting sockets to Linux. Today I will check/fix it.