SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

@Doktor:

Stellite will Hardfork next Week. Can u please implement th new Code so that it is also Mine able?

THX

Hayzam from XTL said that they will be reaching out. I too hope that @Doktor83 is willing and able to implement their upcoming custom algo. Please keep up the good work, Dok!

wtf they fork again? where can i get some info about this?

You can check here:
https://twitter.com/Stellite_QA/status/1001901290065100800
t.me/Stellite_EN/40349

Doktor, you will find a lot more detail in the XTL discord here:
https://discord.gg/S7qKV6E

I can put you in touch with the team directly if needed.

Thanks, i will look into it.

[lebuawu2]

Hi Dok,

what is the meaning with below error :
Job not Found
Invalid Nonce; is miner not compatible with nicehash?

I'am mining cn-heavy on nicehash with latest srbminer 1.5.6.

I put "nicehash" : true in the pools file.

any advice to avoid that error?

https://imgur.com/a/2REbBss

Thanks.

[adaseb]

Anyone here still mining with the good old Radeon 7970 and R9 280X GPUs.

Wondering what the most optimized intensity would be to set. So far using 2 thread causes entire system to freeze up. But looks like the intensity and work size could be adjusted.

With Claymore I get like 600hs with the Tahitis wondering if I can get more speed with this software?

[JuanHungLo]

Anyone here still mining with the good old Radeon 7970 and R9 280X GPUs.

Wondering what the most optimized intensity would be to set. So far using 2 thread causes entire system to freeze up. But looks like the intensity and work size could be adjusted.

With Claymore I get like 600hs with the Tahitis wondering if I can get more speed with this software?

My calculations still demonstrate that the Tahitis are still best with Equihash algo.

[RuMiner]

what intensity do u use with vega 56 stock bios for etn mining ?

I got best result at 112 intensity on 56 vegas, 120 on 64

[ipe4enko]

Super speed on 1.5.6

http://joxi.ru/Dr8ORMBT4Z0kjA

Sometimes on version 1.5.6 with same configs, cards rx550 has hash rate 508 but somtimes 518-520

[r0m@n]

Dok, hi.
What is default value for "giveup_limit" ? And what is the max?

Best regards.

[Sharpeich]

Anyone here still mining with the good old Radeon 7970 and R9 280X GPUs.

Wondering what the most optimized intensity would be to set. So far using 2 thread causes entire system to freeze up. But looks like the intensity and work size could be adjusted.

With Claymore I get like 600hs with the Tahitis wondering if I can get more speed with this software?

I tried on 7950, CN Heavy (XHV) = 300 h/s

[extradition90]

Hi, thanks for this miner like it!

Just I didn't find how to add the worker, when you have somes rig it's important I thinks to check if everythings is ok.

If somebody know how to add this, maybe in pool.txt, don't know

Regards,

[lebuawu2]

Hi, thanks for this miner like it!

Just I didn't find how to add the worker, when you have somes rig it's important I thinks to check if everythings is ok.

If somebody know how to add this, maybe in pool.txt, don't know

Regards,

how to set worker is depend on the pool, so which pool you want to connect?

[extradition90]

this one http://78.214.121.201:9090/#

thanks

[666damien666]

my rig have a strange pattern, every 48 hours nontsop mining will get 90 Celcius shutdown , while my GPU not showing any burned effect , anyone know how to fixed this ?

i'm using SRB latest version.

had same issue when running SRB 1.5.1 on windows 1803 update. So when i rollback to 1709 windows 10, everything look fine.

So, if you updated to 1803 probably that's causing the problem, or worse if your gpu's are really getting to 90c.

By default if not set "shutdown_temperature", is set to 90c. I will just disable this default setup, so if "shutdown_temperature" is not explicitly set in config, it wont be enabled and no more problems on 1803.

i not set the "shutdown_temperature" and the rig make a reboot and his freeze, i have Windows Version 1709 :9

Same for me. Set "shutdown_temperature" or not in config file the result same. My rig alway auto shutdown. My card very cool at 50c. I will test new ver 1.5.6 today

Its not set automatically to 90c anymore, so you shouldnt have a prpblem anymore. Report please 

just run 5 minuties in 1.5.6, when one of gpu hash rate = 0 cause  maybe i OC too hight your tool make my rig hang remotely, cant use teamview and vnc. i am going back home to connect my rig to monitor and use mouse to close tool and run again . Can you fix pls ?

I have now the small rig on windows version 1803 updatet and amd driver 18.3.4 installed. miner version 1.5.6 (hbm @ 1100mhz \ 905mV, Vega 64 runs at about 2.05khs)

[UnclWish]

On AMD 18.5.1 driver on 1803 Windows 10 x64 my RX 580 recognized by SRB miner as R9 200 series [Ellesmere] and every launch build new kernels... It's abnormal. I think, you must update miner to support new drivers, doctor...
By the word, all Claymore's miners detects my cards right on 18.5.1...

And I still can't understand, why every lounch of SRB miner speed is different from each other... To reach max speed it's need to launch SRB several times without any changes in config or something else...
Cards is RX 580 8Gb.

Are you mining Heavy?  If that's the case then the behavior is existent on multiple cards.

Yes, heavy. But case is not in cars. Case is in miner.

I get similar behavior on xmr-stak on Heavy.  

xmr stak, gateless gate also have this 'problem'.
Maybe this means the 'problem' is in the algo, not in miners?

What about compiling kernels every launching?

[UselessGuru]

Maybe I am missing something  

I am currently developing a miner file for MultiPoolMiner and struggle with the following:
For the follwing example MPM is installed in directory in 'C:\MultiPoolMiner' (working directory)

MPM starts miners like this:

.Bin\AMD-SRBMiner\SRBMiner-CN.exe --config .\Bin\AMD-SRBMiner\NiceHash_CryptoNightHeavy_3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox_Config.txt --cpool cryptonightheavy.eu.nicehash.com:3364 --cwallet 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox --cpassword x --ctls false --cnicehash true

How can I specify the working directory (where it reads config / pool files from and will put the compiled srb kernel files)?

Issue a):
If config or pool file name is unqualified (no path information) then SRBMiner looks for the files in the current directory. MPM however needs to keep the config & pool in the miners program directory

Preferred behavior:
1. SRBMiner should look for the config / pool file in the current directory. If none found:
2. SRBMiner should look for the config / pool file in the program directory.
Or make the location a configuration item.

Issue b):
SRBMiner always puts all its compiled SRB files in the working directory, e.g. 'C:\MultiPoolMiner' which is not very nice :-) and can create other issues with file access, e.g. if the working directory is R/O.

Preferred behavior:
All compiled kernels should always go to the program directory. Or make the destination path a configuration option.

[666damien666]

how should I enter the command that adl is enabled?

[UnclWish]

how should I enter the command that adl is enabled?

If you don't point option to disable adl it enabled by default.

[4ward]

Maybe I am missing something  

I am currently developing a miner file for MultiPoolMiner and struggle with the following:
For the follwing example MPM is installed in directory in 'C:\MultiPoolMiner' (working directory)

MPM starts miners like this:

.Bin\AMD-SRBMiner\SRBMiner-CN.exe --config .\Bin\AMD-SRBMiner\NiceHash_CryptoNightHeavy_3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox_Config.txt --cpool cryptonightheavy.eu.nicehash.com:3364 --cwallet 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox --cpassword x --ctls false --cnicehash true

How can I specify the working directory (where it reads config / pool files from and will put the compiled srb kernel files)?

Issue a):
If config or pool file name is unqualified (no path information) then SRBMiner looks for the files in the current directory. MPM however needs to keep the config & pool in the miners program directory

Preferred behavior:
1. SRBMiner should look for the config / pool file in the current directory. If none found:
2. SRBMiner should look for the config / pool file in the program directory.
Or make the location a configuration item.

Issue b):
SRBMiner always puts all its compiled SRB files in the working directory, e.g. 'C:\MultiPoolMiner' which is not very nice :-) and can create other issues with file access, e.g. if the working directory is R/O.

Preferred behavior:
All compiled kernels should always go to the program directory. Or make the destination path a configuration option.

Why not just set WorkingDirectory to the exe path?

In Forager (see my signature), I'm using same function you wrote (using c#) to start processes, just setting WorkingDirectory to Split-Path of the miner executable?

[666damien666]

how should I enter the command that adl is enabled?

If you don't point option to disable adl it enabled by default.

thanks

[UselessGuru]

Maybe I am missing something  

I am currently developing a miner file for MultiPoolMiner and struggle with the following:
For the follwing example MPM is installed in directory in 'C:\MultiPoolMiner' (working directory)

MPM starts miners like this:

.Bin\AMD-SRBMiner\SRBMiner-CN.exe --config .\Bin\AMD-SRBMiner\NiceHash_CryptoNightHeavy_3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox_Config.txt --cpool cryptonightheavy.eu.nicehash.com:3364 --cwallet 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox --cpassword x --ctls false --cnicehash true

How can I specify the working directory (where it reads config / pool files from and will put the compiled srb kernel files)?

Issue a):
If config or pool file name is unqualified (no path information) then SRBMiner looks for the files in the current directory. MPM however needs to keep the config & pool in the miners program directory

Preferred behavior:
1. SRBMiner should look for the config / pool file in the current directory. If none found:
2. SRBMiner should look for the config / pool file in the program directory.
Or make the location a configuration item.

Issue b):
SRBMiner always puts all its compiled SRB files in the working directory, e.g. 'C:\MultiPoolMiner' which is not very nice :-) and can create other issues with file access, e.g. if the working directory is R/O.

Preferred behavior:
All compiled kernels should always go to the program directory. Or make the destination path a configuration option.

Why not just set WorkingDirectory to the exe path?

In Forager (see my signature), I'm using same function you wrote (using c#) to start processes, just setting WorkingDirectory to Split-Path of the miner executable?

MPMs core logic does not allow this (it would require quite some work change it). All other miners work as is.

[dingdongtobias]

Maybe I am missing something  

I am currently developing a miner file for MultiPoolMiner and struggle with the following:
For the follwing example MPM is installed in directory in 'C:\MultiPoolMiner' (working directory)

MPM starts miners like this:

.Bin\AMD-SRBMiner\SRBMiner-CN.exe --config .\Bin\AMD-SRBMiner\NiceHash_CryptoNightHeavy_3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox_Config.txt --cpool cryptonightheavy.eu.nicehash.com:3364 --cwallet 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo.BlackBox --cpassword x --ctls false --cnicehash true

How can I specify the working directory (where it reads config / pool files from and will put the compiled srb kernel files)?

Issue a):
If config or pool file name is unqualified (no path information) then SRBMiner looks for the files in the current directory. MPM however needs to keep the config & pool in the miners program directory

Preferred behavior:
1. SRBMiner should look for the config / pool file in the current directory. If none found:
2. SRBMiner should look for the config / pool file in the program directory.
Or make the location a configuration item.

Issue b):
SRBMiner always puts all its compiled SRB files in the working directory, e.g. 'C:\MultiPoolMiner' which is not very nice :-) and can create other issues with file access, e.g. if the working directory is R/O.

Preferred behavior:
All compiled kernels should always go to the program directory. Or make the destination path a configuration option.

c:\miner\srbminer\srbminer-cn.exe

1. Kernels are created in c:\miner\srbminer
2. Config files need to be in c:\miner\srbminer, because that is its working directory
3. Utility (MPM) has to adapt to the miner, not the miner to the utility