MaxMidnite
Newbie
 Offline
Activity: 143
Merit: 0
|
 |
June 01, 2018, 05:05:00 PM |
|
Using latest version, thank you for stellitev4 support.
HashRate is also very nice, one thing I get alot of
Pool rejected result 0x0001704C (low difficulty share)
Other miners do not show me this message, what it mean?
Anything to worry about?
it means you are using wrong algorithm. What are you trying to mine? Also where do I add the "Kernel" can you give example as I added: /* Intensity 0-> auto intensity, or value from 1-300 */ "intensity" : 0, "kernel" : 4, Tried each Kernel and made no difference in hash, so thinking put it in wrong place? Thanks man |
|
|
|
|
MaxMidnite
Newbie
Offline
Activity: 143
Merit: 0
|
|
June 01, 2018, 05:12:29 PM |
|
Using latest version, thank you for stellitev4 support.
HashRate is also very nice, one thing I get alot of
Pool rejected result 0x0001704C (low difficulty share)
Other miners do not show me this message, what it mean?
Anything to worry about?
it means you are using wrong algorithm. What are you trying to mine? StelliteV4, I set it to this and stellite pool? Maybe pool no ready yet? nooo, they will fork next week, probably friday  So it's not that algo , yet. Thanks man, got it, my bad. :-) |
|
|
|
|
|
doktor83 (OP)
|
|
June 01, 2018, 08:16:58 PM |
|
Using latest version, thank you for stellitev4 support.
HashRate is also very nice, one thing I get alot of
Pool rejected result 0x0001704C (low difficulty share)
Other miners do not show me this message, what it mean?
Anything to worry about?
it means you are using wrong algorithm. What are you trying to mine? Also where do I add the "Kernel" can you give example as I added: /* Intensity 0-> auto intensity, or value from 1-300 */ "intensity" : 0, "kernel" : 4, Tried each Kernel and made no difference in hash, so thinking put it in wrong place? Thanks man Not there, you put it in gpu_conf : "gpu_conf" :
[
{ "id" : 0, "intensity" : 80, "worksize" : 8, "threads" : 1, "kernel" : 1},
{ "id" : 1, "intensity" : 40, "worksize" : 8, "threads" : 2, "kernel" : 2},
{ "id" : 3, "intensity" : 30, "worksize" : 8, "threads" : 2, "kernel" : 3},
{ "id" : 4, "intensity" : 90, "worksize" : 8, "threads" : 1, "kernel" : 4}
]What GPU's do you have? |
|
|
|
|
Iamtutut
|
|
June 01, 2018, 08:23:47 PM |
|
Doctor, is there a kernel recommandation for RX 570s ?
Thanks.
|
|
|
|
|
|
doktor83 (OP)
|
|
June 01, 2018, 08:33:43 PM |
|
Doctor, is there a kernel recommandation for RX 570s ?
Thanks.
Kernel 1, that's for newer cards. Also if you dont set it , it will be automatically set to 1. |
|
|
|
|
Iamtutut
|
|
June 01, 2018, 08:35:22 PM |
|
Thanks for your reply, then I don't have anything to change.
|
|
|
|
|
trifo
Newbie
Offline
Activity: 29
Merit: 0
|
|
June 01, 2018, 08:42:58 PM |
|
Version 1.5.7 deleted by antivirus...
|
|
|
|
|
|
doktor83 (OP)
|
|
June 01, 2018, 08:46:48 PM |
|
Version 1.5.7 deleted by antivirus...
also version 1.5.6, 1.5.5 and so on |
|
|
|
trifo
Newbie
Offline
Activity: 29
Merit: 0
|
|
June 01, 2018, 08:56:12 PM |
|
No, only 1.5.7 version... Tested...
|
|
|
|
|
|
doktor83 (OP)
|
|
June 01, 2018, 09:06:37 PM |
|
No, only 1.5.7 version... Tested...
yes i decided finally to put a virus into it, now is time to steal all your pictures from my documents  |
|
|
|
trifo
Newbie
Offline
Activity: 29
Merit: 0
|
|
June 01, 2018, 09:40:35 PM |
|
Observation and info for you only... Windows Defender delete version 1.5.7 previous versions no...
|
|
|
|
|
Sgsg666
Jr. Member
Offline
Activity: 113
Merit: 1
|
|
June 02, 2018, 02:56:33 AM |
|
Observation and info for you only... Windows Defender delete version 1.5.7 previous versions no...
dude previous versions does gets deleted too if i tried to run miner without windows defender exclusion. |
|
|
|
|
|
UnclWish
|
|
June 02, 2018, 05:28:12 AM |
|
No, only 1.5.7 version... Tested...
yes i decided finally to put a virus into it, now is time to steal all your pictures from my documents I don't think you will be glad to see them ))))))) |
|
|
|
|
dingdongtobias
Newbie
Offline
Activity: 156
Merit: 0
|
|
June 02, 2018, 06:18:25 AM |
|
Really? Some people still so retarded that they have an urge to share with the community if a well known miner was reported as virus?
Thank you for saving us from the evil!
|
|
|
|
|
istr
Newbie
Offline
Activity: 24
Merit: 0
|
|
June 02, 2018, 06:23:49 AM |
|
Hi Doc!
A strange behavior!
I've noticed that a long time ago but now I've decided to tell you.
It may help you debugging the code.
I've automated startup procedure for the miner whenever windows starts.
Let's take for example one of my rigs with 6 cards.
Windows boots and after a while miner starts.
After some time of stabilization watching memory usage in task manager I see it stable at ~286 - 290 M.
If I kill the miner process and start it again giving it time to stabilize it stays at ~560 - 570 M.
That's why I was saying all the time about "memory management".
I don't know but this is the behavior.
It may help.
Greetings!
ps: in heavy algo.
well if you would follow this thread regulary you would know that this is very well known, and can be fixed by just fireing up GPU-Z You know something Doc, you didn't understand me. I'm not talking about the known hashrate drop problem which I first introduced to the community the temporary solution with GPU-Z but about different seized memory (MB) into 2 different runs of miner which of course may related. No hard feelings! No hard feelings, we did not understand eachother. Also i don't take notes who said/wrote what and when , so i couldn't know you found this nice 'fix'. Is this behaviour you are referring to happening every time (like first run always less mem used, second run always ok) ? I see other miners have this 'problem' too on heavy. Yes, happening all the time. Miner uses about half the mem every time machine reboots and for every next run about double of that. Also what means compute errors? I've installed a new Gigabyte rx580 8gb card. I have no memory errors, no hang ups, working fine but only this new card reports 1 or 2 compute errors in stats in a day! |
|
|
|
|
hesido
Jr. Member
Offline
Activity: 158
Merit: 5
|
|
June 02, 2018, 07:01:14 AM |
|
Also what means compute errors?
I've installed a new Gigabyte rx580 8gb card.
I have no memory errors, no hang ups, working fine but only this new card reports 1 or 2 compute errors in stats in a day!
It means there are uncaught memory errors which produced a bad share, which got caught by SRBminer and was not submitted. Some of my microns exhibit memory errors but almost never produce a bad share (but a memory error reported is an error caught and "fixed", the mem errors which don't get caught are the problem), but my Hynix ones never display a mem error in monitoring software yet they produce bad shares once in a while. If bad shares by a specific card is above 0.5% (compared to what it produces on its own), you may reduce mem freq by 10mhz or up the voltage. Just 10mhz may work wonders. |
|
|
|
|
ALEX_RAA
Newbie
Offline
Activity: 78
Merit: 0
|
|
June 02, 2018, 07:40:58 AM |
|
No, only 1.5.7 version... Tested...
yes i decided finally to put a virus into it, now is time to steal all your pictures from my documents aaaaa  |
|
|
|
|
|
doktor83 (OP)
|
|
June 02, 2018, 07:52:40 AM |
|
Also what means compute errors?
This is how it works : Gpu gets a job to work on and returns results. Those results are then verified on the CPU, and if the CPU gets the same result as GPU did, that is a valid share and is sent to the pool. If the GPU result isn't the same the result CPU got, that is a compute error, and that share won't be sent to the pool, because its not valid. Compute errors can happen for a few reasons: bad timings, too much overclock/underclock, too high intensity. |
|
|
|
MaxMidnite
Newbie
Offline
Activity: 143
Merit: 0
|
|
June 02, 2018, 08:32:17 AM |
|
Using latest version, thank you for stellitev4 support.
HashRate is also very nice, one thing I get alot of
Pool rejected result 0x0001704C (low difficulty share)
Other miners do not show me this message, what it mean?
Anything to worry about?
it means you are using wrong algorithm. What are you trying to mine? Also where do I add the "Kernel" can you give example as I added: /* Intensity 0-> auto intensity, or value from 1-300 */ "intensity" : 0, "kernel" : 4, Tried each Kernel and made no difference in hash, so thinking put it in wrong place? Thanks man Not there, you put it in gpu_conf : "gpu_conf" :
[
{ "id" : 0, "intensity" : 80, "worksize" : 8, "threads" : 1, "kernel" : 1},
{ "id" : 1, "intensity" : 40, "worksize" : 8, "threads" : 2, "kernel" : 2},
{ "id" : 3, "intensity" : 30, "worksize" : 8, "threads" : 2, "kernel" : 3},
{ "id" : 4, "intensity" : 90, "worksize" : 8, "threads" : 1, "kernel" : 4}
]What GPU's do you have? Thanks Man, The results did not change between kernels maybe little hash change 1-5hash. Another question if I set, /* Intensity 0-> auto intensity, or value from 1-300 */ "intensity" : 0, The confusion is does it take the intensity auto or the gpu_conf values?? |
|
|
|
|
ALEX_RAA
Newbie
Offline
Activity: 78
Merit: 0
|
|
June 02, 2018, 02:11:34 PM |
|
v. 1.5.6 still have problem - if some gpus stop hashing the miner not hangs but just stoped and not showing any information further. So if i see that and press some key (space or h for example) it will show that gpu's hash speed is 0 and make reconnect to pool and after it will work good for some time.
sorry but i dont understand,can you turn on logging and share that? so marked area is when i see that one of rigs do no sending shares more than 2 minutes. Miner just not doing anything after returning to user mining and than i have to press H or S and see hash speed is 0 it's v 1.5.6 p.s. i have to admit that in v 1.5.6 this situations happens not often |
|
|
|
|
|
