SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Truthchanter]

I noticed in patch notes there now should be 1 min, 5 min, 30 min or something average hash rates.. my miner doesn't show this? just still shows current hashrate.. any idea why?

Press 'S'.

Oh wowwww I tried that multiple times... but I didn't look hard enough until now 

thanks

[larzul]

Hello everyone!

I'm running 6x rx580 and trying to mine cryptonight-heavy using srbminer 1.5.8.
I'm running them on identical 1250/2000 clock settings (downclocked core, stock memory), 50 intensity and double threads.
However, per-card hashrates are far from similar: 4 run at 1050-ish h/s, one runs at 950 h/s and the last one runs at much lower 600 h/s.

Any idea what might have gone wrong here?

Alright, that's just bad luck. Somehow those two were throttled to lower clocks, no idea why, but touching some afterburner controls did the trick. 6300 h/s total now.

[livada]

samo da znas da ti nesto ne valja s poolom za devfee.
verzija je zadnja 1.5.8 a rurdario sam NBR

https://image.prntscr.com/image/Kj9qHqSjRFqUTLak-bBiZA.jpg

https://image.prntscr.com/image/UtTWQIHXSv2sihn5TbjVPg.jpg

[ivakar]

I noticed in patch notes there now should be 1 min, 5 min, 30 min or something average hash rates.. my miner doesn't show this? just still shows current hashrate.. any idea why?

hm, maybe there should be a speciall setting for this in bat file?  I mean in order to turn this on you have to specify the key in bat. so you'd better check read me file, maybe there is a mention about it and how to run it?

[doktor83]

samo da znas da ti nesto ne valja s poolom za devfee.
verzija je zadnja 1.5.8 a rurdario sam NBR

ko ce ga znati, pogledacu hvala

[eccezioni]

guys, do you know how to set the fan speed and GPU temperature detection? I'm using Rx 580 Nitro + 8Gb Micron memory. It currently does not show me this data.
I attach photos.
Thank you
https://prnt.sc/jr8eia

[abg00]

guys, do you know how to set the fan speed and GPU temperature detection? I'm using Rx 580 Nitro + 8Gb Micron memory. It currently does not show me this data.
I attach photos.
Thank you

driver version?
reinstall driver with cleanup

[doktor83]

guys, do you know how to set the fan speed and GPU temperature detection? I'm using Rx 580 Nitro + 8Gb Micron memory. It currently does not show me this data.
I attach photos.
Thank you

driver version?
reinstall driver with cleanup

yes, install newer drivers that will allow BUS ID's to be detected correctly, and then you can set fan speed.

[RuMiner]

I confirm a strange hashrate drop on 18.5.2 with CN7, although it starts from a better result. E.g. 7 x Vega64 gave ~14000 on 18.4.1, now it runs at ~14200, but sevaral hours later it can drop to 13700. Miner restart helps. And it is definitely not  throttling or overheating, because they are liquid cooled edition and don't raise above 50C. Rolled one rig back to 18.4.1.

[dragonmike]

V1.5.8
- Fixed a bug in pool switching process
- Fixed a bug in watchdog's "reboot_script"
- Changed default devfee pool for Heavy algo

+ I would like to politely ask everyone if they appreciate my work, to switch their miners to this new version.

The default devfee pool for heavy algo was pool.sumokoin.com, which is under the control of the origin Sumo team.
They self-decided, without any community voting or anything to switch their algo back to now ASIC friendly Cryptonight from block 137500.
That will happen in about two days.
What this means to users of SRBMiner/Me ? On previous versions if you mine any coin on 'heavy' algo from monday, the devfee will connect to pool.sumokoin.com using 'heavy' algo,
but the pool will be using classic CN, so shares will be ALL rejected, and i won't be getting the 0.85% fee.


Thank you in advance, if you are going to support me and going to switch to this version.

Done, buddy. Thanks for your awesome work. All my AMD rigs (and my friends') are sporting your miner.

[doktor83]

I confirm a strange hashrate drop on 18.5.2 with CN7, although it starts from a better result. E.g. 8 x Vega64 gave ~14000 on 18.4.1, now it runs at ~14200, but sevaral hours later it can drop to 13700. Miner restart helps. And it is definitely not  throttling or overheating, because they are liquid cooled edition and don't raise above 50C. Rolled one rig back to 18.4.1.

this is where the "min_rig_speed" parameter comes handy  

[doktor83]

V1.5.8
- Fixed a bug in pool switching process
- Fixed a bug in watchdog's "reboot_script"
- Changed default devfee pool for Heavy algo

+ I would like to politely ask everyone if they appreciate my work, to switch their miners to this new version.

The default devfee pool for heavy algo was pool.sumokoin.com, which is under the control of the origin Sumo team.
They self-decided, without any community voting or anything to switch their algo back to now ASIC friendly Cryptonight from block 137500.
That will happen in about two days.
What this means to users of SRBMiner/Me ? On previous versions if you mine any coin on 'heavy' algo from monday, the devfee will connect to pool.sumokoin.com using 'heavy' algo,
but the pool will be using classic CN, so shares will be ALL rejected, and i won't be getting the 0.85% fee.


Thank you in advance, if you are going to support me and going to switch to this version.

Done, buddy. Thanks for your awesome work. All my AMD rigs (and my friends') are sporting your miner.

thank you very much! Kisses to all of you 

[livada]

Any have saphire vega 56 NITRO+ ?

[Krisztian5]

Hi all. What is "invalid job ID" in the miner?

I have 18 now after 8h on bitcedi network...
It is a pool problem? Memory errors minimal (1-10) so thats good, and the pool reporting 0 invalid shares.

[CryptoPeter]

max i can get with 6 rx vegas on cryptonight v7 algo is abuot 8900, on cryptonight heavy i can get 7900 h/s

can anyone help me? i should be getting at least 10,900 maybe a bit more on cryptonight v7

[rambetiko]

Any have saphire vega 56 NITRO+ ?

hello livada. i wanted your setup for vega 64. Can you share your settings?

amd driver?
intensty?
overdriventool?
Gpu P7 and Mem P3 mhz/volt

i use hellm vega 64 register setup (morepower142) and blockchain driver.
http://www.overclock.net/forum/67-amd-ati/1633446-preliminary-view-amd-vega-bios-26.html#post_26297003

[vmozara]

Doktor,

i also have issue to report

goes like this
have 4 rigs, all 4 of them go from xmr stak to srbminer1.5.8
each rig 6x Vega 18.5.2
all 4 rigs run super stable with srbminer
one of the rigs i restart for some reason after like 2000 minutes of uptime
other 3 rigs run for like 3000-3500 minutes of uptime and then all crash at approximate the same time
the miner stopped saying  GPU hashrate 0, restarting miner, but miner could not restart, even by process kill or try to reset PC, it hangs in reset process. Only hard reset help

Why would all miners stop at same uptime?

Anyway, I reset all so can´t really say what happened or give any more details, but i will monitor this time and see if it happen again

Otherwise, i fell in love with your miner.

[vmozara]

max i can get with 6 rx vegas on cryptonight v7 algo is abuot 8900, on cryptonight heavy i can get 7900 h/s

can anyone help me? i should be getting at least 10,900 maybe a bit more on cryptonight v7

That is really bad, with srbminer you can go 12000 V7 almost plug and play

1. DDU (use DDU pprogram to remove all your GPU drivers cleanly) and reset the computer
2. Install Adrenaline 18.5.2, click custom install, install ONLY driver, no any other crap. Do not reset computer after installation
3. Apply Vega power tables from vega mining guide
4. Disable crossfire and ULPS in registry on all 6 cards
5. Reset computer
6. Start your new favorite miner with OverdriveNTool settings applied (you can also get them fro mvega mining guide, I use 1408/800 and mem 1100/800 but driver seems to keep them at 0.87V anyway) and enjoy 12000 hashrate

If you are not familiar with any of these steps i recommend you take a break and study it because you probably can´t reliably operate vega mining rig without knowing these steps

[CryptoPeter]

not familiar with the power tables or crossfire or ULPS but ty for writing a 6 step guide on exactly what needs to be done giving me something iw can work with. thank you

[hamesh]

+ I would like to politely ask everyone if they appreciate my work, to switch their miners to this new version.

All of my miners have been updated to 1.5.8.  Great work - keep it up