crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2013, 05:36:27 PM |
|
What does the error "-3" mean when I have a BFL FPGA Single with the WinUSB drivers installed, but CGMiner says it can't open the device?
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4200
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2013, 09:55:06 PM |
|
What does the error "-3" mean when I have a BFL FPGA Single with the WinUSB drivers installed, but CGMiner says it can't open the device?
/** Access denied (insufficient permissions) */ LIBUSB_ERROR_ACCESS = -3,
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
Rant2112
Newbie
Offline
Activity: 70
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 04:06:15 AM |
|
ASICMiner USB Block Erupter cgminer 3.3.1
I get
AMU0: Comms error (werr=-7 amt=0)
cgminer 3.1.1 works fine. I couldn't get 3.2.1 to work.
I'm starting 3.1.1 with --icarus-options and --icarus-timing and -S and the pool info.
I'm starting 3.3.1 with just the pool info.
|
|
|
|
Paladin69
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 05:09:00 AM Last edit: June 27, 2013, 06:03:24 AM by Paladin69 |
|
Yay zadig utility fucked up my ability to connect to my FPGA BFL MiniRig. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Is there a tutorial out there somewhere? Maybe this can't be done on an older XP laptop? Was working before just fine prior to this winusb garbage. It appeared to install correctly but no com ports are recognized now.
|
|
|
|
Askit2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 06:40:07 AM |
|
Yay zadig utility fucked up my ability to connect to my FPGA BFL MiniRig. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Is there a tutorial out there somewhere? Maybe this can't be done on an older XP laptop? Was working before just fine prior to this winusb garbage. It appeared to install correctly but no com ports are recognized now. Easy to undo. Go under system, device manager, USB serial bus controllers. The device will be there. Tell Windows to upgrade the driver. It will install the old serial one. Open Zadig, show all devices, and administrator. use WinUSB and the version of Zadig in the FPGA-README to try again. It will work. I went to Linux and found far less errors. Raspberry Pi's are cheap, capable and low power. Personally it was the best <$60 I spent case included. Good luck!
|
|
|
|
kano
Legendary
Offline
Activity: 4578
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 07:08:44 AM |
|
Yay zadig utility fucked up my ability to connect to my FPGA BFL MiniRig. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Is there a tutorial out there somewhere? Maybe this can't be done on an older XP laptop? Was working before just fine prior to this winusb garbage. It appeared to install correctly but no com ports are recognized now. There aren't supposed to be COM ports ... read the FPGA-README.
|
|
|
|
|
|
-Redacted-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 02:34:06 PM Last edit: June 27, 2013, 02:46:41 PM by -Redacted- |
|
cgminer 3.3.0 under Ubuntu 13.04 - 64 bit. Runs fine with 11 Erupters initially, but after about three minutes, it locks the system up so hard that I have to power off and back on to get it to respond..
cgminer 3.1.1 works, (after I create a symlink for libusb.so.0) but the devices change to SICK one by one over a period of time until they are all down.
Any suggestions?
|
|
|
|
Paladin69
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 03:07:30 PM |
|
Yay zadig utility fucked up my ability to connect to my FPGA BFL MiniRig. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Is there a tutorial out there somewhere? Maybe this can't be done on an older XP laptop? Was working before just fine prior to this winusb garbage. It appeared to install correctly but no com ports are recognized now. Easy to undo. Go under system, device manager, USB serial bus controllers. The device will be there. Tell Windows to upgrade the driver. It will install the old serial one. Open Zadig, show all devices, and administrator. use WinUSB and the version of Zadig in the FPGA-README to try again. It will work. I went to Linux and found far less errors. Raspberry Pi's are cheap, capable and low power. Personally it was the best <$60 I spent case included. Good luck! Thanks. Kano says it no longer recognizes as com ports. Things may be installed correctly already but I just didn't run the command line properly for cgminer-nogpu.exe I tried the old BFL easyminer admin tools from last year that lets me flash the red LED's inside...and nothing is recognized anymore which is why I freaked out a bit. Maybe it just doesn't work anymore? I did notice I have to unplug and plug back in the USB cables after rebooting every time to even see the USB serial drivers at all...all 20 of them. The big problem with these readme files is that it is information overload and it seems tailored to linux which does me no good. Gives me a headache scrolling thru it. Not sure why linux info is included at all in the windows zip version. sudo, sudo, sudo up the poop chute. jesus...lol I need a readme_for_dummies.txt edit: must use libusb-1.0.dll...ok I guess I missed that part. I don't remember an option to load from file in zadig...I'll just have to look again...
|
|
|
|
-Redacted-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 03:11:05 PM |
|
First thing you need to tell us is what version of cgminer you're trying to run.
|
|
|
|
Paladin69
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 03:17:57 PM |
|
First thing you need to tell us is what version of cgminer you're trying to run.
It is the latest. I always grab that latest every time I feel like attempting to make this work...when I fail I give up and go back to what works for me...the old 2104, heh Unlike linux, you can't just add -S noauto at the end. At least this was the case for FPGA-only.exe. In windows I used to have to call out all com ports individually. but since it is not com ports anymore, not sure what to use...
|
|
|
|
-Redacted-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 04:34:57 PM Last edit: June 27, 2013, 04:45:58 PM by -Redacted- |
|
When you look in Devices and Printers, how are your mining devices described? edit: must use libusb-1.0.dll...ok I guess I missed that part. I don't remember an option to load from file in zadig...I'll just have to look again...
zadig gives you a selection of 4 or 5 different drivers you can install - there are up/down gadgets on the riight of the box where the big green arrow points. Are you scrolling through the list and selecting the right driver?
|
|
|
|
BR0KK
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 07:23:04 PM |
|
Just compiled cgminer 3.3.1 for my pi.
The Blockerupters rerecognised and its mining (sort of).... Is the green light supposed to stay off while mining (on = idle). All my 10 BE mine for a second and then the green LED is on again?
|
|
|
|
Trongersoll
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 07:27:59 PM |
|
Just compiled cgminer 3.3.1 for my pi.
The Blockerupters rerecognised and its mining (sort of).... Is the green light supposed to stay off while mining (on = idle). All my 10 BE mine for a second and then the green LED is on again?
it should blink on occasionly, but be mostly off
|
|
|
|
BR0KK
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 07:44:17 PM Last edit: June 27, 2013, 08:35:19 PM by BR0KK |
|
Just compiled cgminer 3.3.1 for my pi.
The Blockerupters rerecognised and its mining (sort of).... Is the green light supposed to stay off while mining (on = idle). All my 10 BE mine for a second and then the green LED is on again?
it should blink on occasionly, but be mostly off hm .... something is wrong then. Could that be because they are not getting enough work from eclipsemc.com? Must be that they do not get enough juice from the Hub .... i can not get more than one working :/ I tried them on Win7 and i cant even get cgminer working .... CGminer on Win7 just won't accept any pool i give to it? It just freezes or quits on me. I cant even get to the main screen after entering a pool. Does anyone have a beginners Tutorial at hand that describes step by step what to do?
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2013, 09:08:45 PM |
|
Just compiled cgminer 3.3.1 for my pi.
The Blockerupters rerecognised and its mining (sort of).... Is the green light supposed to stay off while mining (on = idle). All my 10 BE mine for a second and then the green LED is on again?
it should blink on occasionly, but be mostly off hm .... something is wrong then. Could that be because they are not getting enough work from eclipsemc.com? Must be that they do not get enough juice from the Hub .... i can not get more than one working :/ I tried them on Win7 and i cant even get cgminer working .... CGminer on Win7 just won't accept any pool i give to it? It just freezes or quits on me. I cant even get to the main screen after entering a pool. Does anyone have a beginners Tutorial at hand that describes step by step what to do? I have this one: https://bitcointalk.org/index.php?topic=220450.0Seems to help a lot of people. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
|
shawtux
Newbie
Offline
Activity: 57
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 28, 2013, 12:12:49 AM |
|
thanks! but the source and the binary both say its 3.2.1 and not 3.1 :S is that ok?
|
|
|
|
kano
Legendary
Offline
Activity: 4578
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 28, 2013, 12:22:59 AM |
|
thanks! but the source and the binary both say its 3.2.1 and not 3.1 :S is that ok? I think you clicked on the wrong one ... the one in RPi_32 says 3.1.1 when I download it and run it (and did also when I put it there ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ) Or did you not run the one you downloaded? The official source 3.1.1 also says 3 1 1 in configure.ac ... so you clicked on something wrong ... (or ran a different version to what you downloaded)
|
|
|
|
|