-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
June 05, 2013, 02:00:23 AM Last edit: June 05, 2013, 03:08:30 AM by ckolivas |
|
This CPU FIX crash may be related to the 2 INSTANCE crash. Only the 17 lancelot one crashes. cgminer-nogpu.exe caused an Access Violation at location 00453209 in module cgminer-nogpu.exe Reading from location 7c105dbd. Registers: eax=00000020 ebx=007055d0 ecx=00000058 edx=7c105dbd esi=00000000 edi=00000016 eip=00453209 esp=0692f87c ebp=00000000 iopl=0 nv up ei pl nz na pe nc cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010202 Call stack: Hmm.... Are you sure you've installed the ming debugger and are choosing debug on exit? None of your debug traces have given any actual information.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
June 05, 2013, 03:02:25 AM |
|
Yes I click debug and that program comes up. I'm on server 2012.
|
|
|
|
Zalfrin
|
|
June 05, 2013, 03:41:18 AM |
|
Does anyone have any suggestions for getting cgminer working for running ztex boards under windows? The precompiled windows binary detects the ztex devices but then crashes (windows says it stopped responding).
I set up the windows build environment per the windows-build.txt file in the repository, and was able to get the same results with my own compiled version.
I noticed that same .txt file mentioned trying the libusbx driver instead of libusb. I followed those instructions, but the cgminer configure step complains about the usb library being missing.
|
|
|
|
CommanderVenus
|
|
June 05, 2013, 03:48:53 AM |
|
Just to check, on Linux, is 3.2.0 working fine? (Using 1 Ztex, 2 BFL FPGA and a bunch of ASICMINER USB sticks)
Or should I stick on the previous version?
If it initialises the AMU (Asicminer USB Block Erupters) correctly, then yes go with it. If not, on linux, you simply need to unplug and re-plug in your USB devices before you start 3.1.1 (and use --icarus-timing 3.0=100 --icarus-options 115200:1:1 + the -S device selections) Is there a way to get this Block Erupter working with the litecoin mining -scrypt option?
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
June 05, 2013, 03:49:37 AM |
|
Just to check, on Linux, is 3.2.0 working fine? (Using 1 Ztex, 2 BFL FPGA and a bunch of ASICMINER USB sticks)
Or should I stick on the previous version?
If it initialises the AMU (Asicminer USB Block Erupters) correctly, then yes go with it. If not, on linux, you simply need to unplug and re-plug in your USB devices before you start 3.1.1 (and use --icarus-timing 3.0=100 --icarus-options 115200:1:1 + the -S device selections) Is there a way to get this Block Erupter working with the litecoin mining -scrypt option? README FAQ ...aka no
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
daemondazz
|
|
June 05, 2013, 03:50:30 AM |
|
Is there a way to get this Block Erupter working with the litecoin mining -scrypt option?
No, the BE ASIC is a dedicated SHA256 calculation chip. It won't do anything else.
|
Computers, Amateur Radio, Electronics, Aviation - 1dazzrAbMqNu6cUwh2dtYckNygG7jKs8S
|
|
|
CommanderVenus
|
|
June 05, 2013, 04:22:33 AM |
|
Oohh.. Sorry.. And thank you.
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
June 05, 2013, 04:53:42 AM |
|
You should merged mine btc, nmc, ixc and dvc.
|
|
|
|
CumpsD
|
|
June 05, 2013, 04:59:25 AM |
|
Just to check, on Linux, is 3.2.0 working fine? (Using 1 Ztex, 2 BFL FPGA and a bunch of ASICMINER USB sticks)
Or should I stick on the previous version?
If it initialises the AMU (Asicminer USB Block Erupters) correctly, then yes go with it. If not, on linux, you simply need to unplug and re-plug in your USB devices before you start 3.1.1 (and use --icarus-timing 3.0=100 --icarus-options 115200:1:1 + the -S device selections) -S auto on 3.1.1 sufficient? (Saw some post of people listing every single usb device)
|
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
June 05, 2013, 09:56:03 AM |
|
You should merged mine btc, nmc, ixc and dvc.
You can only do that with p2pool right? M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
Lucko
|
|
June 05, 2013, 11:14:27 AM |
|
|
|
|
|
stepkrav
|
|
June 05, 2013, 05:46:59 PM |
|
well, as i wrote some pages before, i decided to make an i386 version by compiling from source (version 3.1.1). I made the binary and i can execute it with -h for example. But other than that, when i give ./cgminer it does nothing at all. I tried with the asic usb's on and giving the appropriate paremeters -o -u -p -S /dev/ttyUSB1 but it returned nothing. I tried with sudo but nothing. What seems strange to me is that it returns no message as error, so as to try to fix it. Ideas? Thanks. cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.40GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1200.02 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management:
|
|
|
|
CumpsD
|
|
June 05, 2013, 05:57:14 PM |
|
Just to check, on Linux, is 3.2.0 working fine? (Using 1 Ztex, 2 BFL FPGA and a bunch of ASICMINER USB sticks)
Or should I stick on the previous version?
If it initialises the AMU (Asicminer USB Block Erupters) correctly, then yes go with it. If not, on linux, you simply need to unplug and re-plug in your USB devices before you start 3.1.1 (and use --icarus-timing 3.0=100 --icarus-options 115200:1:1 + the -S device selections) -S auto on 3.1.1 sufficient? (Saw some post of people listing every single usb device) -S auto didn't work, had to list all /dev/ttyUSBx devices to get it to work But, it's working
|
|
|
|
flound1129
|
|
June 05, 2013, 06:58:23 PM |
|
seems like the website is down.
|
Multipool - Always mine the most profitable coin - Scrypt, X11 or SHA-256!
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
June 06, 2013, 12:29:25 AM |
|
True. That's not what I meant. Fortunately bitminter does BTC and NMC.. and IXC is worthless and DVC is completely worthless. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
xorxor
|
|
June 06, 2013, 01:09:41 AM |
|
Hi
Is there any way of disabling cashing of shares on disconnect? with "--scrypt" Cgminer keeps crashing on internet or pool disconects.
changed mobo, GPU's,ram,risers,PSU's . it allways happens on some locations.
no problems on SHA.
using proxy did not helped.
|
fuck deeponion, fuck bitcoincash, all glory to one BITCOIN
|
|
|
daemon
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 06, 2013, 01:59:23 AM |
|
Hi! Debian 6 built from git: cgminer version 3.2.0 - Started: [2013-06-06 12:47:43] -------------------------------------------------------------------------------- (5s):1.740G (avg):2.648Gh/s | A:199 R:0 HW:0 U:37.1/m WU:37.1/m ST: 2 SS: 0 NB: 1 LW: 460 GF: 0 RF: 0 Connected to stratum.50btc.com diff 1 with stratum as user username Block: 00cb8438078e1093... Diff:15.6M Started: [12:47:43] Best share: 371 -------------------------------------------------------------------------------- [P]ool management [G]PU management S]ettings [D]isplay options [Q]uit GPU 0: 76.0C 2419RPM | 663.1M/663.6Mh/s | A:56 R:0 HW:0 U: 10.45/m I: 9 GPU 1: 63.0C 4576RPM | 451.7M/450.2Mh/s | A:30 R:0 HW:0 U: 5.60/m I: 9 BLT 0: | 396.8M/394.2Mh/s | A:34 R:0 HW:0 U: 6.35/m BLT 1: | 395.8M/386.3Mh/s | A:34 R:0 HW:0 U: 6.35/m BLT 2: | 399.5M/384.4Mh/s | A:15 R:0 HW:0 U: 2.80/m BLT 3: | 393.9M/385.5Mh/s | A:30 R:0 HW:0 U: 5.60Segmentation fault root@localhost:~/cgminer# ---------------------------------------------------
[2013-06-06 12:51:52] Accepted 2ade55e6 Diff 5/1 BLT 3 pool 0 [2013-06-06 12:51:52] Accepted dae0d6f9 Diff 1/1 GPU 0 pool 0 cat /var/log/messages | grep cgminer segfault ... Jun 6 12:47:41 localhost kernel: [ 4533.900688] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep Jun 6 12:53:06 localhost kernel: [ 4859.486667] miner/5[8547]: segfault at ffffffff00000040 ip 00007fd91a450e90 sp 00007fd908ff6840 error 4 in libusb-1.0.so.0.0.0[7fd91a44b000+d000] # ./cgminer -n [2013-06-06 12:58:51] CL Platform 0 vendor: Advanced Micro Devices, Inc. [2013-06-06 12:58:51] CL Platform 0 name: AMD Accelerated Parallel Processing [2013-06-06 12:58:51] CL Platform 0 version: OpenCL 1.2 AMD-APP (1124.2) [2013-06-06 12:58:51] Platform 0 devices: 2 [2013-06-06 12:58:51] 0 Tahiti [2013-06-06 12:58:51] 1 Pitcairn [2013-06-06 12:58:51] GPU 0 AMD Radeon HD 7900 Series hardware monitoring enabled [2013-06-06 12:58:51] GPU 1 AMD Radeon HD 7800 Series hardware monitoring enabled [2013-06-06 12:58:51] 2 GPU devices max detected [2013-06-06 12:58:51] USB all: found 10 devices - listing known devices .USB dev 0: Bus 2 Device 2 ID: 0403:6001 Manufacturer: 'FTDI' Product: 'FT232R USB UART' .USB dev 1: Bus 2 Device 3 ID: 0403:6001 Manufacturer: 'FTDI' Product: 'FT232R USB UART' .USB dev 2: Bus 4 Device 3 ID: 0403:6001 Manufacturer: 'FTDI' Product: 'FT232R USB UART' .USB dev 3: Bus 4 Device 4 ID: 0403:6001 Manufacturer: 'FTDI' Product: 'FT232R USB UART' [2013-06-06 12:58:51] 4 known USB devices .USB dev 0, .USB dev 1, .USB dev 2, .USB dev 3 - Lancelot's
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
June 06, 2013, 02:03:36 AM |
|
Hi
Is there any way of disabling cashing of shares on disconnect? with "--scrypt" Cgminer keeps crashing on internet or pool disconects.
changed mobo, GPU's,ram,risers,PSU's . it allways happens on some locations.
no problems on SHA.
using proxy did not helped.
--lowmem
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
xorxor
|
|
June 06, 2013, 02:19:54 AM |
|
Hi
Is there any way of disabling cashing of shares on disconnect? with "--scrypt" Cgminer keeps crashing on internet or pool disconects.
changed mobo, GPU's,ram,risers,PSU's . it allways happens on some locations.
no problems on SHA.
using proxy did not helped.
--lowmem thx! testing...
|
fuck deeponion, fuck bitcoincash, all glory to one BITCOIN
|
|
|
|