sunblaster
|
|
June 06, 2013, 02:28:53 AM |
|
Has anyone got v3.2 to correctly detect ASICminer USBs on Windows? Keeps asking for "AMU driver" even though UART BRidge COM driver is installed and USBs are listed under COMP Ports. Also 3.1.1 doesn't seem to work with COM ports higher then 9, no matter what format I use in BAT file it just says failed to open port. Here is my .bat cgminer-nogpu -o http://pit.deepbit.net:8332 -u someuser -p somepassword --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM3 -S COM4 -S COM5 -S COM6 -S COM7 -S COM8 -S COM9 if i try "-S COM10" or any other higher ports I get: Icarus detect: Failed to open PORT 10 I gave up and started using BitMinter SunBlaster
|
|
|
|
|
|
The trust scores you see are subjective; they will change depending on who you have in your trust list.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
af_newbie
Legendary
Offline
Activity: 2688
Merit: 1468
|
|
June 06, 2013, 02:40:07 AM |
|
Has anyone got v3.2 to correctly detect ASICminer USBs on Windows? Keeps asking for "AMU driver" even though UART BRidge COM driver is installed and USBs are listed under COMP Ports. Also 3.1.1 doesn't seem to work with COM ports higher then 9, no matter what format I use in BAT file it just says failed to open port. Here is my .bat cgminer-nogpu -o http://pit.deepbit.net:8332 -u someuser -p somepassword --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM3 -S COM4 -S COM5 -S COM6 -S COM7 -S COM8 -S COM9 if i try "-S COM10" or any other higher ports I get: Icarus detect: Failed to open PORT 10 I gave up and started using BitMinter SunBlaster Use -S \\.\COM10 on the command line or "scan-serial" : [ "icarus:\\\\.\\COM10"] in the config file 3.2.0 uses direct USB so you have to set that up, 3.1.1 uses silabs USB/COM driver. 3.2.0 has issues. So use 3.1.1, or use bfgminer.
|
|
|
|
sunblaster
|
|
June 06, 2013, 02:51:56 AM |
|
Has anyone got v3.2 to correctly detect ASICminer USBs on Windows? Keeps asking for "AMU driver" even though UART BRidge COM driver is installed and USBs are listed under COMP Ports. Also 3.1.1 doesn't seem to work with COM ports higher then 9, no matter what format I use in BAT file it just says failed to open port. Here is my .bat cgminer-nogpu -o http://pit.deepbit.net:8332 -u someuser -p somepassword --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM3 -S COM4 -S COM5 -S COM6 -S COM7 -S COM8 -S COM9 if i try "-S COM10" or any other higher ports I get: Icarus detect: Failed to open PORT 10 I gave up and started using BitMinter SunBlaster Use -S \\.\COM10 on the command line or "scan-serial" : [ "icarus:\\\\.\\COM10"] in the config file 3.2.0 uses direct USB so you have to set that up, 3.1.1 uses silabs USB/COM driver. 3.2.0 has issues. So use 3.1.1, or use bfgminer. ok great, -S \\.\COM10 seems to work.
|
|
|
|
daemon
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 06, 2013, 05:43:20 AM |
|
In my previous post I described the problem. This problem occurs stably on three computers at intervals of approximately 15 minutes. cgminer 3.2.0 Now, for reasons of clarity, cgminer was started with the - disable-gpu Here I found the instructions to provide more information about the problem. The following information from the bt full command: (gdb) bt full #0 0x00007f0db0aa6e90 in ?? () from /lib/libusb-1.0.so.0 No symbol table info available. #1 0x00007f0db0aa8408 in ?? () from /lib/libusb-1.0.so.0 No symbol table info available. #2 0x00007f0db0aa65bb in ?? () from /lib/libusb-1.0.so.0 No symbol table info available. #3 0x00007f0db0aa6d73 in libusb_handle_events_timeout () from /lib/libusb-1.0.so.0 No symbol table info available. #4 0x00007f0db0aa6e0d in libusb_handle_events () from /lib/libusb-1.0.so.0 No symbol table info available. #5 0x00007f0db0aa7395 in ?? () from /lib/libusb-1.0.so.0 No symbol table info available. #6 0x00007f0db0aa74b4 in libusb_bulk_transfer () from /lib/libusb-1.0.so.0 No symbol table info available. #7 0x0000000000434014 in _usb_read (cgpu=0x10c76c0, ep=<value optimized out>, buf=<value optimized out>, bufsiz=<value optimized out>, processed=<value optimized out>, timeout=<value optimized out>, end=0x0, cmd=C_GETRESULTS, readonce=false) at usbutils.c:2129 usbdev = 0x10c32f0 ftdi = true tv_start = {tv_sec = 1370496429, tv_usec = 1878} read_start = {tv_sec = 1370496429, tv_usec = 1878} tv_finish = {tv_sec = 1370496429, tv_usec = 1877} max = 0.10000000000000001 done = <value optimized out> bufleft = <value optimized out> err = <value optimized out> got = 0 tot = 0 first = <value optimized out> search = <value optimized out> endlen = <value optimized out> usbbuf = "\001`\000\362\000\362", '\000' <repeats 5138 times>, "@P\022\252\r\177", '\000' <repeats 58 times>"\200, P\022\252\r\177", '\000' <repeats 18 times>"\240, R\022\252\r\177\000\000`Y\022\252\r\177\000\000\230\377\377\377\377\377\377\377", '\000' <repeats 16 times>, "S\376+\260\r\177\000\000\000\000\000\000\000\000\000\000@R\022\252\r\177\000\000\340R\022\252\r\177\000\000\240Y\022\252\r\177\000\000\230\377\377\377\377\377\377\377XP\022\252\r\177\000\000\000\000\000\000\000\000\000\000S\376+\260\r\177\000\000\063\000\000\000.\000\000\000\240X\022\252\r\177\000\000\062\064.9\r\177\000\000A\375+\260\r\177\000\000\000\000\000\000\000\000\000\310\000\000\000\000\000\000\000\000\065\000\000\000\065\000\000\000\062\000\000\000\064\000\000\000.\000\000\000\071\000\000\000T\003,\260\r\177", '\000' <repeats 25 times>"\240"... ptr = 0x7f0daa123b40 "\001`" usbbufread = 8192 #8 0x0000000000436073 in icarus_get_nonce (icarus=0x10c76c0, buf=0x7f0daa125d20 "", tv_start=<value optimized out>, tv_finish=<value optimized out>, thr=0x10cebe0, read_time=<value optimized out>) at driver-icarus.c:423 read_start = {tv_sec = 1370496429, tv_usec = 1878} read_finish = {tv_sec = 1370496429, tv_usec = 1877} err = <value optimized out> amt = 0 rc = 5108 read_amount = 0 first = true #9 0x00000000004363bc in icarus_scanhash (thr=0x10cebe0, work=0x10f5ee0, max_nonce=<value optimized out>) at driver-icarus.c:923 icarus = 0x10c76c0 ret = <value optimized out> err = 0 amount = 64 ob_bin = "\200\316\372 \277\017\252o\240}L\b7?,\377\233ʵ3\256\321+\217\004\370\341\333PĐ\367", '\000' <repeats 20 times>, "7\023\001\032\251\035\260Q6\322\030", <incomplete sequence \370> nonce_bin = "\000\000\000" ob_hex = <value optimized out> hash_count = <value optimized out> tv_start = {tv_sec = 1370496423, tv_usec = 854044} tv_finish = {tv_sec = 1370496429, tv_usec = 1877} tv_history_start = {tv_sec = 0, tv_usec = 17624032} tv_history_finish = {tv_sec = 0, tv_usec = -10485688} Ti = <value optimized out> Xi = <value optimized out> curr_hw_errors = 0 i = <value optimized out> history0 = <value optimized out>
|
|
|
|
Lucko
|
|
June 06, 2013, 08:46:22 AM |
|
True. That's not what I meant. Fortunately bitminter does BTC and NMC.. and IXC is worthless and DVC is completely worthless. M Than I don't get it... Are you saying that Bitparking is p2pool? It is not. And I don't agree on worthless part. You do get a lot of them and if you are selling smart you get up to 50% of NMC value... But then again NMC could be also be called worthless... But as long as I get something I see it as bonus.
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
June 06, 2013, 09:53:17 AM |
|
P2pool does not equal merged mining, it's an option. Slush used to give nmc. I've moved to p2pool when he stopped.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4102
Merit: 1633
Ruu \o/
|
|
June 06, 2013, 09:57:10 AM |
|
In my previous post I described the problem. This problem occurs stably on three computers at intervals of approximately 15 minutes. cgminer 3.2.0 Now, for reasons of clarity, cgminer was started with the - disable-gpu Here I found the instructions to provide more information about the problem. The following information from the bt full command: Thanks for that. It's hard to know if it's crashing in libusb due to a libusb bug or we're calling a libusb function with invalid parameters. I'm inclined to always blame our code first to keep looking for a bug since our code is under very heavy development. We're revamping that section of code somewhat and hopefully indirectly address it.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
joae1975
|
|
June 06, 2013, 12:06:44 PM |
|
Noob here. I have a new/used Asus on Windows 7. Trying to ruin cgminer-nogpu. Plain Cgminer won't run. cgminer gives me an error saying: "The program can't start because OpenCL.dll is missing from your computer. Try reinstalling the program to fix this problem." When I run cgminer-nogpu it says: I tried to follow all the other thread's instructions. All the read me files. Some things didn't make any sense to me, couldn't do what they were saying. What does all this mean above? Obviously I need to install a driver or fix something. What should I do? Can someone give me a user friendly instructions link? Thanks!!
|
1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
June 06, 2013, 12:23:58 PM |
|
I posted instructions earlier. You'll know when you succeeded when your com ports disappear
|
|
|
|
joae1975
|
|
June 06, 2013, 12:44:49 PM |
|
I posted instructions earlier. You'll know when you succeeded when your com ports disappear
Earlier? This thread has 540 pages, a little help?
|
1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
June 06, 2013, 12:52:01 PM |
|
|
|
|
|
joae1975
|
|
June 06, 2013, 02:31:28 PM |
|
Using cgminer on windows 7 Drivers installed with zadig as described and can view in device manager I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why? I unchecked "hide extensions for all file types" as instructed when creating a .bat file. My text in the bat file reads as follows: (replacing user/pass with xxx/yyy) C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 The pathway is correct. Can anyone see any problems? Only 1 miner plugged into usb port. Thanks!
|
1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk
|
|
|
twmz
|
|
June 06, 2013, 02:33:57 PM |
|
Using cgminer on windows 7 Drivers installed with zadig as described and can view in device manager I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why? I unchecked "hide extensions for all file types" as instructed when creating a .bat file. My text in the bat file reads as follows: (replacing user/pass with xxx/yyy) C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 The pathway is correct. Can anyone see any problems? Only 1 miner plugged into usb port. Thanks! The command line you posted is for the 3.1.1 version of cgminer (which does not use zadig). The 3.2 version of cgminer does not need --icarus-options --icarus-timing or -S. Also, the 3.2 version often doesn't work for asicminer USB devices. The issue is under investigation. The most reliable way to get this working is to use the older 3.1.1 version of cgminer with the command line you posted above.
|
Was I helpful? 1 TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs WoT, GPGBitrated user: ewal.
|
|
|
af_newbie
Legendary
Offline
Activity: 2688
Merit: 1468
|
|
June 06, 2013, 02:36:28 PM |
|
Using cgminer on windows 7 Drivers installed with zadig as described and can view in device manager I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why? I unchecked "hide extensions for all file types" as instructed when creating a .bat file. My text in the bat file reads as follows: (replacing user/pass with xxx/yyy) C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 The pathway is correct. Can anyone see any problems? Only 1 miner plugged into usb port. Thanks! Use version 3.1.1 for Icarus/Lancelot/Erupter devices. I thought it suppose to be -S \\.\COM3
|
|
|
|
joae1975
|
|
June 06, 2013, 02:56:05 PM |
|
Using cgminer on windows 7 Drivers installed with zadig as described and can view in device manager I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why? I unchecked "hide extensions for all file types" as instructed when creating a .bat file. My text in the bat file reads as follows: (replacing user/pass with xxx/yyy) C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 The pathway is correct. Can anyone see any problems? Only 1 miner plugged into usb port. Thanks! Use version 3.1.1 for Icarus/Lancelot/Erupter devices. I thought it suppose to be -S \\.\COM3 Tried v3.1.1, tried / & \ both ways. Still same thing. In addition. When I start cgminer-nogpu.exe manually, enter my pool/user/pass... It says this: Any help?
|
1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk
|
|
|
turtle83
|
|
June 06, 2013, 03:02:29 PM |
|
Using cgminer on windows 7 Drivers installed with zadig as described and can view in device manager I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why? I unchecked "hide extensions for all file types" as instructed when creating a .bat file. My text in the bat file reads as follows: (replacing user/pass with xxx/yyy) C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 The pathway is correct. Can anyone see any problems? Only 1 miner plugged into usb port. Thanks! Use version 3.1.1 for Icarus/Lancelot/Erupter devices. I thought it suppose to be -S \\.\COM3 Tried v3.1.1, tried / & \ both ways. Still same thing. In addition. When I start cgminer-nogpu.exe manually, enter my pool/user/pass... It says this: http://db.tt/5LSsuujsAny help? if u used 3.2.0 and then tried to go back to 3.1.1 , make sure u unplug and re-plug the device . atleast on linux you have to...
|
|
|
|
twmz
|
|
June 06, 2013, 03:18:32 PM |
|
Using cgminer on windows 7 Drivers installed with zadig as described and can view in device manager I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why? I unchecked "hide extensions for all file types" as instructed when creating a .bat file. My text in the bat file reads as follows: (replacing user/pass with xxx/yyy) C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 The pathway is correct. Can anyone see any problems? Only 1 miner plugged into usb port. Thanks! Use version 3.1.1 for Icarus/Lancelot/Erupter devices. I thought it suppose to be -S \\.\COM3 Tried v3.1.1, tried / & \ both ways. Still same thing. In addition. When I start cgminer-nogpu.exe manually, enter my pool/user/pass... It says this: http://db.tt/5LSsuujsAny help? if u used 3.2.0 and then tried to go back to 3.1.1 , make sure u unplug and re-plug the device . atleast on linux you have to... You probably also have to undo whatever zadig did in order to use 3.1.1 after having set everything up for 3.2.0. I use linux, so I can't tell you for sure what those steps are.
|
Was I helpful? 1 TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs WoT, GPGBitrated user: ewal.
|
|
|
af_newbie
Legendary
Offline
Activity: 2688
Merit: 1468
|
|
June 06, 2013, 03:21:40 PM |
|
Using cgminer on windows 7 Drivers installed with zadig as described and can view in device manager I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why? I unchecked "hide extensions for all file types" as instructed when creating a .bat file. My text in the bat file reads as follows: (replacing user/pass with xxx/yyy) C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 The pathway is correct. Can anyone see any problems? Only 1 miner plugged into usb port. Thanks! Use version 3.1.1 for Icarus/Lancelot/Erupter devices. I thought it suppose to be -S \\.\COM3 Tried v3.1.1, tried / & \ both ways. Still same thing. In addition. When I start cgminer-nogpu.exe manually, enter my pool/user/pass... It says this: http://db.tt/5LSsuujsAny help? if u used 3.2.0 and then tried to go back to 3.1.1 , make sure u unplug and re-plug the device . atleast on linux you have to... You probably also have to undo whatever zadig did in order to use 3.1.1 after having set everything up for 3.2.0. I use linux, so I can't tell you for sure what those steps are. +1. Need to reinstall silabs drivers for 3.1.1 or bfgminer.
|
|
|
|
joae1975
|
|
June 06, 2013, 03:40:22 PM |
|
+1. Need to reinstall silabs drivers for 3.1.1 or bfgminer.
I'm just going to go with a different miner software. Can't get it to work. Thanks guys for trying.
|
1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk
|
|
|
Trongersoll
|
|
June 06, 2013, 07:19:33 PM Last edit: June 06, 2013, 07:42:41 PM by Trongersoll |
|
*sniff* *sniff* ok, i need some hand holding. I grabbed the tarball from GIT for the latest version. I copied the files into my cgminer directory (this is 32 bit Ubuntu), over writing the existing files. I ran autogen.sh and then make. I plugged in an ASICminer USB stick. the green light is on. then i ran ./cgminer with no parameters. It started GPU mining fine, but didn't show anything about the ASICminer. Do i need to reboot with the USB stick plugged in? or is there a start parameter that i need? Please don't tell me to read the readmes, i did. and i'm terrible at searching 100s of pages of a thread. I did the group join thing in the Readme.
|
|
|
|
|